Top Fencing Companies in Des Plaines, IL, 60007 | Compare & Call

There are 204 fencing companies server in Des Plaines IL

Quality First Painting

Quality First Painting

9108 Skokie Blvd, Skokie IL 60077
Painters, Fences & Gates, Pressure Washers

Quality First Painting is a trusted painting, fencing, and pressure washing service serving Skokie, IL. Local homeowners often face fencing problems like leaning posts and wind-damaged panels, especia...

Nailberg Electric Gate Repair

Nailberg Electric Gate Repair

20393 N Rand Rd Ste 304, Kildeer IL 60074
Fences & Gates

Nailberg Electric Gate Repair is a trusted provider of fences and gates services in Kildeer, IL. We specialize in installing, repairing, painting, and staining both automatic and manual gates and fenc...

Fence Xperts

Fence Xperts

2323 S Mount Prospect Rd, Des Plaines IL 60018
Fences & Gates

Fence Xperts, based in Des Plaines, IL, was founded in 2016 by two former customers and employees frustrated by poor communication in the fence industry. They built a company around reliable service a...

Silva Garage Door

Silva Garage Door

495 Cordial Dr, Des Plaines IL 60018
Garage Door Services, Fences & Gates

Silva Garage Door has been serving Des Plaines and surrounding Illinois communities for years, specializing in residential and commercial garage door installation, repair, and maintenance. Our team ha...

« Previous PagePage 21 of 21Next »


Estimated Fencing Costs in Des Plaines, IL

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,584

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Des Plaines. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What are the height and placement rules for a corner lot near I-90?

Zoning limits are 3 feet in the front yard and 6 feet in the rear, with a 0-foot setback allowing installation on the property line. For corner lots, a visibility 'sight triangle' must remain clear. This is critical near high-traffic areas like I-90 access roads. Fences cannot obstruct driver sightlines at the intersection of two streets.

Why do so many posts in the Downtown neighborhood fail after a few winters?

Frost heave moves posts set above the 42-inch frost line. The IRC requires footings to extend below this depth. A 36-inch post in Des Plaines will lift, cracking concrete and warping panels. We use a 48-inch minimum depth with compacted gravel bases to prevent this structural failure.

What are the critical steps before any digging starts?

Call JULIE (811) at least three business days before excavation. Hitting a utility line in the Downtown neighborhood carries major repair liabilities and fines. We manage all permit paperwork with the Des Plaines Building Department concurrently, ensuring the project file is complete before the first post hole is dug.

What is the typical timeline for a consultation and project start?

We schedule consultations within 48 hours. A standard route from the Des Plaines Public Library via I-90 allows for a 25-35 minute response to most city addresses. After design approval and utility locates, crew dispatch typically occurs within 10-14 business days, barring permit delays.

What is the legal process for replacing a fence on the property line?

The Illinois Fence Act (765 ILCS 130) governs partition fences. As of 2026, you must provide written notice to adjoining landowners at least 30 days before construction or replacement of a shared boundary line fence. This notification is a strict requirement in Des Plaines to establish cost-sharing and prevent neighbor disputes.

How can a smart gate meet pool safety and modern security needs?

Integrated IoT gate systems must still comply with the Illinois pool safety code, requiring self-closing, self-latching mechanisms and a 48-inch minimum height. Modern systems use encrypted wireless latches that log entry events. This combination meets updated liability standards by providing both a physical barrier and digital access control.

How does the local 105 MPH V-ult wind rating affect fence design?

The 105 MPH ultimate design wind speed from ASCE 7-22 standards dictates structural capacity. This rating requires closer post spacing (often 6 feet on-center, not 8), deeper concrete footings, and wind-rated tension brackets. Fences without this engineering fail during peak storm season gusts, which channel through areas near I-90.

What fencing materials perform best with Des Plaines soil and pest conditions?

Moderate soil corrosivity demands galvanized steel posts and hardware. Aluminum or vinyl are also suitable. With a moderate termite risk, avoid untreated wood posts in direct ground contact. Use stainless steel fasteners for cedar or composite boards to prevent unsightly rust streaks from forming on the finish.



Scroll to Top
CALL US NOW