Top Fencing Companies in Old Town, IL, 61704 | Compare & Call
There are 186 fencing companies server in Old Town IL
Torres Fence, a family-owned business based in Mundelein, IL, brings over 20 years of hands-on experience to Lake County. Since 2010, we have specialized in the design, installation, and repair of all...
Athanas Fence Co., Inc. is a family-owned fencing contractor serving Highland Park and the North Shore for over 30 years. As a local business, we specialize in custom fences and gates for residential ...
For over 15 years, Prospect Fence has served Streamwood, IL, and the surrounding area as a trusted local fence contractor. We specialize in the installation, repair, painting, and staining of wood, vi...
Beverly Fence Company serves La Grange, IL, helping local homeowners tackle common fencing issues like post rot and frost heave movement. Located near the historic La Grange Village Hall and just minu...
Mending Fences in Chicago, IL, specializes in repairing and replacing rotted fence posts and aging fence systems—a common problem in Chicago homes due to harsh winters, moisture, and clay-rich soil. T...
Genco Renovations
Genco Renovations, an established design and renovation company, provides comprehensive residential remodeling services throughout the Chicago metropolitan area. As a licensed and insured general cont...
Estimated Fencing Costs in Old Town, IL
Q&A
What are the height and setback rules for a fence on my property?
Zoning limits are 4 feet for front yards and 6 feet for rear yards. The setback is 0 feet, meaning the fence can be placed directly on the property line. For corner lots, maintain a clear 'sight triangle' at intersections to ensure driver visibility, especially near I-90/I-94 access points.
What fencing materials are suitable for Old Town's soil and pest conditions?
Use G90 galvanized steel posts and fasteners due to the moderate soil corrosivity index. For wood components, select pressure-treated lumber rated for ground contact to mitigate moderate termite risk. Incompatible materials cause rust streaks and accelerated decay.
Can a smart gate system meet pool safety and liability standards?
Yes. A smart gate with an integrated, self-closing and self-latching IoT mechanism can comply with IBC/IRC Appendix AG, which mandates a 48-inch minimum height. The system must provide a reliable audit trail to demonstrate compliance for homeowner liability in Illinois.
What is required before digging fence post holes?
You must contact JULIE (811) for a utility locate at least 48 hours before excavation. Striking a buried line in Old Town creates major liability, service disruptions, and fines. We manage all required permits with the city to ensure the project complies with local codes.
How soon can a consultation and project start occur?
We dispatch from the Old Town Triangle Association area. Travel via I-90/I-94 allows for a 35-45 minute response for an initial site consultation. Project start dates are scheduled following utility locates, permit approval, and material procurement.
How is a fence engineered to withstand high winds in this area?
The 115 MPH V-ult wind speed rating dictates structural design. This requires closer post spacing, deeper concrete footings, and wind-rated brackets to resist uplift. Fences not built to ASCE 7-22 standards for this wind load can fail during peak storm season gusts.
What are the legal steps for replacing a shared fence on the property line?
Under 765 ILCS 130/1 (Illinois Boundary Fence Act), you must provide written notice to the adjoining neighbor before construction or repair of a shared boundary fence. As of 2026, this notification is a strict prerequisite to establish shared cost liability and avoid disputes.
How deep should fence posts be set in Old Town to prevent frost heave?
Posts must be set below the 42-inch frost line. The IRC requires footings to extend below this depth to prevent frost heave from pushing posts upward and destabilizing the fence. In Old Town's climate, shallow footings lead to premature failure.
