Top Fencing Companies in Shields, IL, 60044 | Compare & Call
There are 107 fencing companies server in Shields IL
Workman Property Preservation
Workman Property Preservation, based in Jacksonville, IL, has provided professional pressure washing and fencing services since 2017. We specialize in power washing, deck staining, fence staining, and...
Landscape & Fence Solutions is a family-owned fencing company based in Belleville, Illinois, established in 1995 by Dean Walsh, a Belleville West graduate and Kansas State University landscape archite...
Chesley Fence & Deck
Since 1967, Chesley Fence & Deck has served Fairview Heights and the East St. Louis metro area as a family-owned fencing and deck company. Under the leadership of General Manager Tim Haug, who brings ...
Picture Perfect Landscaping provides expert landscaping, irrigation, and fence & gate services to Collinsville, IL, and the surrounding areas. Whether you are near the Gateway Convention Center or the...
J & J Fencing is a trusted fence and gate contractor serving Greenville, IL, and the surrounding Bond County area. We understand the local frustrations of loose fence fasteners and gate latch failures...
SALAS Fence And Repairs is a family-owned fence contractor based in Springfield, IL, with over 15 years of experience serving both residential and commercial clients. We specialize in fence installati...
Bigfoot Fence & Deck Company is a locally owned and operated business in Granite City, offering quality craftsmanship with fully staffed, professional crews who complete projects on time and respect y...
Z's Siding and Home Improvement provides professional exterior services to homeowners in Sherman, IL, a village just off Route 29 near Sangchris Lake State Park and the historic Sherman Downtown area....
ACE Fence Solutions is a family-owned business based in Troy, IL, serving the Metro East region of southwestern Illinois. Founded by Travis's father in 1990 as Bob's Fence Repairs, the company was han...
Blue Cord Builders is a veteran-owned general contractor serving Springfield, IL, specializing in fence and gate repair. Located near Washington Park and the Abraham Lincoln Presidential Library, we u...
Estimated Fencing Costs in Shields, IL
Common Questions
What are the height and setback rules for fences in Shields, IL?
Zoning limits are 4 feet in front yards and 6 feet in rear/side yards, with a 0-foot setback allowing installation directly on the property line. Critical exceptions exist for corner lots, which require a 'sight triangle' clear of obstructions. Near I-94, this visibility zone is enforced for traffic safety and must be maintained per municipal code.
What fencing materials hold up best against Shields' soil and pests?
Given the moderate soil corrosivity index and termite risk level, material compatibility is key. Pressure-treated lumber or cedar is standard. All metal components, including fasteners and brackets, must be G90 galvanized steel to prevent rust streaks. Avoid steel posts in direct ground contact without a thick galvanized coating, as soil acidity will cause premature failure.
How soon can you start a fencing project in Shields?
After the initial consultation, we typically schedule installation within 10-14 business days. Our crew routes from Shields Community Park via I-94, allowing for a consistent 25-35 minute response window to sites in the residential district. We confirm the JULIE locate and final permit status before the scheduled start date.
Can I have a smart gate that also meets pool safety codes?
Yes. A self-closing, self-latching gate with the latch mounted at a minimum of 54 inches high is required by the Illinois Swimming Pool Enclosure Code. Modern IoT systems integrate solar-powered Wi-Fi openers that maintain this mechanical latching function, meeting both security trends and liability standards for Illinois homeowners with pools.
How deep should my fence posts be in Shields to prevent frost heave?
Post footings must extend below the 42-inch frost line. Posts set in shallow concrete will lift during freeze-thaw cycles, causing permanent structural failure. In the Shields Residential District, we install all posts to a 48-inch depth, per IRC Section R403, to ensure stability against frost heave from the clay soils around Shields Community Park.
What are my legal obligations to my neighbor when building a fence on the property line?
Under Illinois law (765 ILCS 130/1), a fence on a shared boundary is a 'partition fence.' You must provide written notice to the adjoining landowner at least 30 days before construction. In Shields, this 2026 requirement is strictly enforced for any replacement of an existing shared fence. Failure to notify can result in a civil action for damages.
What steps are required before you dig the first post hole?
State law mandates a utility locate request through JULIE (811) at least three business days before excavation. Hitting a gas, fiber, or electric line in the Shields neighborhood is a major liability event that triggers fines and repair costs. Our process includes submitting the JULIE ticket and managing all associated permit paperwork with the local office before mobilization.
Is a standard fence strong enough for the wind in Shields?
No. The design wind speed for Shields is 115 MPH V-ult. This engineering standard (ASCE 7-22) dictates post spacing, concrete footing size, and bracket strength. A fence rated for 90 MPH will fail during peak storm season. We specify closer post spacing and hurricane ties for all fences exposed to gusts channeled from I-94.