Top Fencing Companies in Kentland, IN, 47951 | Compare & Call

There are 84 fencing companies server in Kentland IN

Illiana Fence Construction

Illiana Fence Construction

Lowell IN 46356
Fences & Gates, Metal Fabricators, Decks & Railing

Since 1972, Illiana Fence Construction LLC has been a trusted provider of residential and commercial fencing, gates, and metal fabrication in Lowell, IN. Specializing in custom iron railings, gates, a...

Decks Unlimited

Decks Unlimited

★☆☆☆☆ 1.0 / 5 (1)
719 Walnut St, Dayton IN 47941
Decks & Railing, Fences & Gates

Decks Unlimited, based in Dayton, IN, has served as central Indiana's largest deck company since 2002. As a Trex Pro Platinum, Timbertech Elite, and Azek Preferred contractor, we specialize in constru...

Unique Home Repairs

Unique Home Repairs

26 Vernon Ln, Lafayette IN 47905
Fences & Gates, General Contractors, Masonry/Concrete

Unique Home Repairs, based in Lafayette, IN, specializes in fences & gates, general contracting, and masonry/concrete services. A common local fencing issue in Lafayette is the shifting soil caused by...

Action Fence

Action Fence

★★★☆☆ 3.0 / 5 (2)
Michigan City IN 46360
Fences & Gates

Action Fence has been serving Michigan City, Indiana, and the surrounding areas with quality fencing solutions for years. We specialize in a wide range of fencing materials including chain link, decor...

« Previous PagePage 9 of 9Next »


Estimated Fencing Costs in Kentland, IN

Emergency Fence/Gate RepairStorm / Security Response
$319 - $434
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,149 - $1,539

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Kentland. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the height and setback rules for a fence on my Kentland property?

Kentland zoning enforces a 3-foot height limit in front yards and a 6-foot limit in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots near US-41, you must maintain a clear 'sight triangle' for driver visibility; a 3-foot open picket design is often required.

What are the 2026 legal requirements for notifying a neighbor before fence work in Kentland?

Indiana Code 32-26-9, the 'Good Neighbor Fence Law,' requires written notice to adjoining landowners at least 30 days prior to replacing a shared boundary fence. In Kentland, this formal notice is a prerequisite for any cost-sharing or dispute resolution under the statute.

How do Kentland's moderate termite risk and soil corrosivity affect material choice?

Moderate termite risk makes pressure-treated wood or steel posts necessary. The moderate soil corrosivity index requires hot-dip galvanized or stainless steel fasteners for all ground-contact hardware. Using standard galvanized nails will cause rust streaks on siding within two seasons.

How soon can a crew start a fencing project in Downtown Kentland?

After a signed contract and permit approval, we dispatch a crew from our office near the Newton County Courthouse. The route via US-41 allows for a 15-20 minute response to most Downtown Kentland properties for the initial consultation and all scheduled work.

Why is the 36-inch frost line depth critical for a post's stability in Downtown Kentland?

The IRC requires footings to extend below the frost line to prevent frost heave. In Downtown Kentland's 36-inch frost depth, posts set shallower will lift during freeze-thaw cycles. This causes racking, sagging gates, and structural failure of the fence line.

How does the 115 MPH V-ult wind speed rating change the fence design?

A 115 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A standard 8-foot panel will not survive peak storm season gusts here without this engineered reinforcement.

What is the utility locate process before digging fence post holes?

You must contact Indiana 811 at least two full business days before excavation. In Downtown Kentland, hitting a gas or fiber line is a major liability causing service outages and repair fines. We manage the 811 ticket and coordinate the resulting markings with the City permit office's inspection schedule.

Can a smart gate system meet Indiana's pool safety code?

Yes. The IBC/IRC mandates a 48-inch minimum barrier with self-closing, self-latching gates. Modern IoT gate operators integrate these mechanical latches. This combination meets the code for an automatic barrier, addressing both security trends and liability standards for Indiana homeowners with pools.



Scroll to Top
CALL US NOW