Top Fencing Companies in Abbeville, LA, 70510 | Compare & Call

There are 77 fencing companies server in Abbeville LA

The Fence Guys

The Fence Guys

★☆☆☆☆ 1.0 / 5 (4)
Broussard LA 70518
Fences & Gates

The Fence Guys have been serving Broussard, LA, for over a decade, offering expert fence and gate installation, repair, and replacement. Located just off Highway 90 near the Broussard Community Park, ...

Bayou Fencing & Supply

Bayou Fencing & Supply

12510 W La Hwy 335, Abbeville LA 70510
Fences & Gates

Bayou Fencing & Supply, Inc., based in Abbeville, LA, has been delivering quality fencing solutions since 1978. Licensed by the State of Louisiana and the State Fire Marshal for access controls and au...

Breaux's Construction

Breaux's Construction

1133 Lopez Rd, Erath LA 70533
Fences & Gates, General Contractors, Decks & Railing

Breaux's Construction, operated by Frank Breaux, is a full-service fence, deck, and general contractor serving Erath and the surrounding areas of Vermilion Parish, Louisiana. With decades of experienc...

Vermilion Landscaping

Vermilion Landscaping

Kaplan LA 70548
Landscaping, Lighting Fixtures & Equipment, Fences & Gates

Vermilion Landscaping, located in Kaplan, LA, provides expert landscaping services including fencing, lighting, and electrical work. Many local homes face issues like privacy fence blowouts and warped...

Granger’s Handyman Service

Granger’s Handyman Service

Youngsville LA 70592
Handyman, Fences & Gates, Painters

Granger’s Handyman Service proudly serves Youngsville, LA, tackling common local fencing issues like rusting metal fences and gate alignment problems. Located near the heart of Youngsville, just off C...

V’s All Fence

V’s All Fence

Delcambre LA 70528
Fences & Gates

V’s All Fence serves Delcambre, LA, and the surrounding areas with expert fence and gate solutions. Located near the historic Delcambre Shrimp Festival grounds and just off LA-14, we address common lo...

Leblanc’s Home Restorations

Leblanc’s Home Restorations

Delcambre LA 70528
Fences & Gates, Damage Restoration

Leblanc’s Home Restorations, based right here in Delcambre, LA, is your go-to expert for tackling common local fencing problems. Many homeowners near the Bayou Carlin Cove and along Main Street face i...

« Previous PagePage 8 of 8Next »


Estimated Fencing Costs in Abbeville, LA

Emergency Fence/Gate RepairStorm / Security Response
$254 - $344
Wood Privacy Fence (Per LF)Estimated Range
$24 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $54
Standard Driveway Gate InstallEstimated Range
$919 - $1,234

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Abbeville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Do smart gates meet pool safety codes?

Yes, when specified correctly. The Louisiana Residential Swimming Pool Safety Act (RS 40:2721) requires a barrier with self-closing, self-latching gates. Modern IoT smart gates integrate these mechanical latches. The moderate smart gate trend in 2026 includes alarms and remote status checks. This integration meets the code's passive security standard and provides active monitoring, reducing liability.

How deep should fence posts be set in Downtown Abbeville?

Set posts at least 24 inches deep. The local frost line depth is 0 inches, so frost heave is not a design factor. In Downtown Abbeville, primary stability comes from resisting the 135 MPH V-ult wind load. Post depth and concrete ballast must counteract overturning forces. IRC standards require this depth for structural cantilevers in high-wind zones. Shallow posts will fail during peak storm season.

Do I need to notify my neighbor before replacing a shared fence?

Yes. Louisiana Civil Code Article 684, the state's good neighbor law, requires notification for work on a shared boundary or partition fence. For 2026 projects in Abbeville, provide written notice to the adjoining owner. This legal step prevents disputes and establishes shared maintenance responsibility. Failure to notify can result in cost recovery actions against you.

Which fencing materials hold up best in Abbeville soil?

Use termite-resistant and corrosion-managed materials. The termite risk level here is Very Heavy. Pressure-treated wood must be ground-contact rated. Metal posts face Moderate Soil corrosivity. Use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Aluminum or vinyl are inert options but require engineering for the 135 MPH wind load. Material compatibility dictates longevity.

How soon can a consultation be scheduled?

Consultations are typically available within 48 hours. For a site visit in Downtown Abbeville, the route originates from Magdalene Square, proceeds via US-167, and takes 15-20 minutes. This allows for a same-day assessment of wind exposure, soil conditions, and zoning compliance. The current labor rate average of $32 per hour is factored into the initial quote.

What is required before digging fence post holes?

You must contact Louisiana 811 for a utility locate. This free service marks public underground lines. In Downtown Abbeville, hitting a gas or fiber line is a major liability with repair costs and fines. After the locate, file for a permit with the Abbeville permit office. The paperwork requires your 811 ticket number and a site plan showing the fence location relative to your property lines.

What are the fence height and placement rules for my property?

Abbeville zoning limits fences to 3 feet high in the front yard and 8 feet in the rear. The setback regulation is 0 feet, allowing installation on the property line. For corner lots near US-167, you must maintain a clear 'sight triangle.' This zone keeps visibility high for traffic. Fences or plantings in this triangle are a code violation and a safety hazard.

How does the 135 MPH wind rating change the fence design?

The 135 MPH V-ult wind speed is a fundamental design parameter. It dictates post spacing, concrete footing size, and bracket strength. Standard 8-foot spacing often reduces to 6 feet. Use through-bolt connections, not just surface screws. The design follows ASCE 7-22 standards for wind-borne debris regions. This engineering ensures the structure survives peak storm season gusts without becoming a projectile.



Scroll to Top
CALL US NOW