Top Fencing Companies in Abita Springs, LA, 70420 | Compare & Call
There are 81 fencing companies server in Abita Springs LA
Aicard Services serves Slidell, LA, providing expert masonry, concrete, fencing, gates, and roofing solutions. Locals near Olde Towne Slidell and the Tchefuncte River know us for tackling common issue...
Fence King is a family-owned fence company operating since 1999, serving the I-12 corridor from Slidell to Denham Springs from our base in Covington, LA. We started with two used nail guns and a borro...
All Kinds of Fences has been serving Ponchatoula and Southeast Louisiana since 1980, when the owner began repairing fences. From that start, the business has grown into a full-service fencing company,...
R&R Ornate Handrail And Fencing
R&R Ornate Handrail And Fencing, based in Springfield, LA, started as Iron Solutions in 1996, focusing on ornate handrail and fencing part-time. In 2024, the business was reorganized and went full-tim...
Southern Legacy serves residential and commercial properties in Saint Gabriel, LA, combining deck construction, fence and gate installation, and interior/exterior painting under one roof. Located near...
Laparra Concrete is a trusted masonry and concrete contractor serving Kenner, LA, and surrounding areas. Specializing in foundation repair, driveway construction, retaining walls, and fence and gate s...
Justin, the owner of Twins Fencing in Slidell, LA, brings decades of construction experience — from welding and roofing to full home builds — into every fence and gate project. After Hurricane Ida dev...
Bailey's Fence, located in Ponchatoula, LA, specializes in fences, gates, decks, and railing services. Local homeowners often face fence post rot and gate sagging due to high humidity. Bailey's Fence ...
Land to Land Landscaping & Maintenance in Holden, LA, is a full-service landscaping and outdoor construction company that tackles the common problems of aging fences and misaligned gates. They offer e...
B&Z Fencing serves Franklinton, LA, providing fence and gate installation, repair, painting, staining, and weatherproofing. Located near the Bogue Chitto River and historic downtown Franklinton, the b...
Estimated Fencing Costs in Abita Springs, LA
Question Answers
What are the height limits for fences on my property?
Abita Springs zoning enforces a 3.5-foot maximum height in the front yard and 8 feet in the rear. The 0-foot setback allows building directly on the property line, but height is measured from the ground on your side. For corner lots, a clear 'sight triangle' is required at intersections to maintain driver visibility, especially for properties near I-12 access roads.
Am I legally required to notify my neighbor before building a fence?
Yes. Louisiana Civil Code Article 684, the 'good neighbor law,' mandates written notification for any work on a shared boundary. As of 2026, Abita Springs requires this notice be sent via certified mail 30 days prior to construction. Failure to comply can result in a civil action for damages and removal of the offending partition fence.
Can I have an electronic gate for my pool fence?
Yes, but integration is critical. St. Tammany Parish code (IRC Appendix AG) requires pool barriers to have self-closing, self-latching gates. A smart gate system must have a primary mechanical latch that automatically engages and a secondary IoT lock. The entire assembly must maintain the 54-inch minimum height. We use actuators tested to ASCE 7-22 wind load standards.
What needs to happen before you dig the first post hole?
Two non-negotiable steps. First, a Louisiana 811 utility locate must be requested and all marks verified. Striking a line in the historic district can incur massive repair costs and halt the project. Second, all permits from the Abita Springs Planning Department, including a Certificate of Appropriateness from the Historic District Commission, must be in hand. We manage this paperwork.
How deep do fence posts need to be in Abita Springs without a frost line?
The IRC still requires a 24-inch minimum embedment depth for structural stability, despite the 0-inch frost line. In the Abita Springs Historic District, soil moisture shifts can cause lateral movement. A 30-inch depth in a 10-inch diameter concrete footing provides the necessary resistance to overturning from V-ult 145 MPH wind loads.
What fencing material holds up best here?
Material compatibility is paramount. With a Very Heavy termite risk, pressure-treated wood is mandatory for any wooden components. Given the Moderate soil corrosivity index, all metal posts, brackets, and fasteners must be hot-dipped galvanized steel or have a certified powder coat. Stainless steel fasteners prevent rust streaks on pickets, which is a common failure point in this climate.
Is a standard fence strong enough for our storms?
No. A V-ult 145 MPH wind speed (ASCE 7-22) dictates the engineering. Standard 8-foot post spacing will fail. We spec 6-foot centers for line posts and 4-foot centers for corner/gate posts. All connections require galvanized through-bolts or structural hurricane ties, not nails or deck screws. This design resists peak storm season gusts from systems channeled by the I-12 corridor.
How soon can you start a project?
Consultations are scheduled within 48 hours. Our route from the Abita Springs Trailhead uses local roads to I-12, ensuring a 25-35 minute response window to most addresses in the parish. After the site assessment and permit approval, material lead times for compliant galvanized steel currently average 10-14 days before crew mobilization.
