Top Fencing Companies in Livingston, LA, 70754 | Compare & Call
There are 49 fencing companies server in Livingston LA
S&S Home Improvement Contractors
S&S Home Improvement Contractors has been serving Greenwell Springs, LA, with expert general contracting, fencing, and painting services for years. Whether you're dealing with loose fence panels or a ...
R&R Construction Services
R&R Construction Services, a fourth-generation builder with over 40 years of experience, has been serving Abita Springs and the surrounding Northshore, Southshore, and Baton Rouge areas since 2009. As...
Halo Construction & Landscaping is a Baton Rouge-based residential construction company, founded and operated by an LSU graduate with over five years of hands-on experience. We specialize in concrete ...
The Blackburn Group
The Blackburn Group has been serving Denham Springs and the surrounding areas for over two decades, specializing in outdoor construction projects including in-ground pool installation (fiberglass, gun...
PrimeScape Fence & Stain, based in Livingston, LA, is a licensed fencing contractor that started in 2020. What began as a weekend side job grew into a full-time business after the flood, driven by a c...
At Legacy Fence Co., we draw on 22 years of fencing experience to serve Hammond, LA, and the North Shore area. As a family-owned, locally operated business, we specialize in installing and repairing b...
Husky Lawn Service
Husky Lawn Service is a family-owned business rooted in strong Christian values. The owner, married for over 35 years with three children, moved from Northeast Arkansas to the Baton Rouge area to star...
Ideal Applications, led by Chase Rhodus, brings over eight years of hands-on experience in specialty woodworking and trim work to Denham Springs, LA. As a local carpenter and general contractor, Chase...
The Empty Cross is a trusted general contracting, fencing, and carpentry service serving Livingston, LA, and the surrounding areas. Local homeowners often face fencing issues like unsightly discolorat...
Estimated Fencing Costs in Livingston, LA
Common Questions
Can I integrate a smart gate with my pool fence for security?
Yes. Integrating an IoT-controlled gate latch with a pool barrier is a growing trend that can meet modern liability standards. The system must still comply with IRC Appendix AG (Louisiana State Uniform Construction Code), which mandates self-closing, self-latching mechanisms. The smart gate's operation log can provide crucial evidence of compliance.
What is the typical timeline and process for a consultation?
We dispatch from the Livingston Parish Courthouse area. For a site consultation in the Town Center, travel via I-12 typically takes 25-35 minutes. We can often schedule a structural and zoning assessment within the same week, pending permit office review of your property plat.
How do termites and soil conditions influence material choice?
Livingston has a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated Southern Yellow Pine is a minimum standard, but metal posts or composite materials offer superior resistance. Use hot-dipped galvanized or stainless-steel fasteners to prevent rust streaks from the corrosive soil. Untreated wood or improper fasteners will fail prematurely.
What are the legal rules for building a fence on a shared property line?
Louisiana Civil Code Article 684 governs 'partition fences.' As of 2026, you must provide written notice to any adjoining landowner before replacing a shared boundary fence in Livingston. This 'good neighbor' law establishes a legal process for cost-sharing and dispute resolution. Failure to notify can void your claim for contribution and create liability.
What are the height and setback rules for a residential fence?
Livingston zoning enforces a 3-foot height limit in front yards and 8 feet in rear yards. The setback is 0 feet, allowing installation directly on the property line. Critical visibility 'sight triangles' must be maintained on corner lots, especially for properties with access points near I-12. Fences cannot obstruct driver sightlines at intersections.
What is required before digging fence post holes?
You must contact Louisiana 811 for a utility locate at least 48 hours before excavation. Striking an unmarked line in Livingston Town Center can cause major service disruption, personal injury, and significant financial liability. We manage the permit paperwork with the local office to ensure the project meets all zoning and safety codes before any work begins.
How is my fence designed to withstand hurricane-force winds?
The design uses a V-ult wind speed of 140 MPH per ASCE 7-22 standards. This engineering rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A fence built to a lower standard, like 110 MPH, will likely fail during the peak storm season gusts common near I-12.
How does the local frost depth affect fence footing design?
Livingston has a 0-inch frost line. This means the primary engineering concern is not frost heave but lateral wind load and soil stability. Posts must be set with engineered concrete footings sized for a V-ult wind speed of 140 MPH. In Livingston Town Center, standard post-hole diggers often fail to meet IRC footing depth requirements for this wind zone, leading to premature racking and collapse.
