Top Fencing Companies in Greenfield, MA, 01301 | Compare & Call

There are 15 fencing companies server in Greenfield MA

AP General Maintenance and Repair

AP General Maintenance and Repair

★☆☆☆☆ 1.0 / 5 (1)
Gill MA 01354
Handyman, General Contractors, Fences & Gates

AP General Maintenance and Repair is a family-owned business run by a Navy veteran and father of four in Gill, MA. With over 10 years of experience, we provide a full range of contracting services inc...

Mass General Services

Mass General Services

Springfield MA 01105
Lawn Services, Fences & Gates, Pressure Washers

Mass General Services in Springfield, MA provides lawn care, fence and gate services, and pressure washing to residential and commercial properties. Established with a vision rooted in quality, creati...

Invisible Fence of Western MA

Invisible Fence of Western MA

★★★★★ 5.0 / 5 (2)
Longmeadow MA 01106
Fences & Gates, Pet Training

Since 1987, Invisible Fence of Western MA, led by Joe Fitzgerald with over 24 years of experience, has served Longmeadow and Northern CT pet owners. As an authorized full-service dealership, we provid...

Demers Landscaping and Excavating

Demers Landscaping and Excavating

★★★★★ 5.0 / 5 (1)
136 Turnpike Rd, Turners Falls MA 01376
Landscaping, Excavation Services, Fences & Gates

Demers Landscaping and Excavating has been family-operated in Turners Falls, MA since 1970. We provide a full range of outdoor services for residential and commercial clients, including landscape desi...

Blixem Renovations

Blixem Renovations

Greenfield MA 01301
Flooring, Fences & Gates, Decks & Railing

Blixem Renovations, based in Greenfield, MA, specializes in flooring, fences & gates, and decks & railing. Many local homes face fencing issues due to harsh New England winters and heavy moisture, lea...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Greenfield, MA

Emergency Fence/Gate RepairStorm / Security Response
$339 - $454
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,214 - $1,624

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Greenfield. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

Can I install an automated smart gate if I have a pool?

Yes, but integration is critical. The MA State Building Code 780 CMR requires pool barriers to have self-closing, self-latching gates. A smart gate system must have an IoT-enabled latch that defaults to a locked position and provides an access log. This meets modern liability standards by proving the gate was secured after every use, a key consideration for Greenfield homeowners.

How soon can a consultation be scheduled, and what is the typical response time?

Consultations are typically scheduled within 48 hours. For a site visit in Greenfield Center, the standard dispatch route originates from the Greenfield Common, proceeds via I-91 to the nearest access point, resulting in a consistent 15-20 minute travel time. This allows for efficient assessment of frost depth, wind exposure, and zoning constraints during the initial meeting.

What is the required process before digging fence post holes?

Massachusetts law requires contacting Dig Safe 811 at least three business days before excavation. In Greenfield Center, with its dense utility infrastructure, hitting a gas, water, or fiber line is a major liability event that incurs repair costs and fines. A professional manages this ticket and concurrently files any required paperwork with the Greenfield Building Department to ensure permits are in order before the locate marks are made.

Is a standard fence design strong enough for Greenfield's wind?

No. Greenfield's 115 MPH V-ult wind speed rating under ASCE 7-22 standards dictates the engineering. This 'ultimate design' wind speed requires reduced post spacing (often 6 feet on-center, not 8), deeper footings, and wind-rated concrete brackets. A standard fence will likely fail during peak storm season gusts, which channel through valleys near I-91, causing uplift and lateral failure.

How deep should my fence posts be set in Greenfield to prevent heaving?

All posts must be set below the 48-inch frost line. The International Residential Code (IRC) requires this for stability. Posts set shallower will be subject to frost heave forces. In Greenfield Center's clay-heavy soils, this movement causes premature failure of panels and hardware. Proper concrete footings extending below this depth are non-negotiable for structural integrity.

What are the height and placement rules for a fence on my Greenfield property?

Greenfield zoning limits fence height to 4 feet in front yards and 6 feet in rear and side yards. A 0-foot setback allows installation directly on the property line. For corner lots, especially those near I-91 feeder roads, you must maintain clear 'sight triangles' at intersections. These are visibility zones where obstructions over 3 feet high are typically prohibited to ensure driver safety.

Am I legally required to notify my neighbor before replacing a shared fence in Massachusetts?

Yes. Massachusetts General Laws Chapter 49, Section 3, the 'Good Neighbor Fence Law,' mandates written notice to adjoining property owners for work on a partition fence. In Greenfield, this 2026 legal requirement includes a description of the proposed fence and a 30-day response period. Failure to provide notice can result in liability for damages and may affect cost-sharing agreements.

Which fencing materials hold up best in Greenfield's soil and climate?

Material compatibility is dictated by moderate soil corrosivity and termite risk. Pressure-treated pine or cedar are standard, but all ground-contact wood must be rated for such use. For metal posts and hardware, use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Vinyl is inert to corrosion but requires robust footings to resist high wind loads common here.



Scroll to Top
CALL US NOW