Top Fencing Companies in Spencer, MA, 01562 | Compare & Call

There are 31 fencing companies server in Spencer MA

Morrison Fence Company

Morrison Fence Company

★★★★★ 5.0 / 5 (1)
9 Brooks Pond Rd, Spencer MA 01562
Fences & Gates

Morrison Fence Company has been serving Central Massachusetts with privacy, security, and safety since 1997. Based in Spencer, MA, we handle all fencing needs for residential, commercial, and municipa...

« Previous PagePage 4 of 4Next »


Estimated Fencing Costs in Spencer, MA

Emergency Fence/Gate RepairStorm / Security Response
$339 - $454
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,214 - $1,624

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Spencer. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

Can I have a smart gate for my pool area?

Yes. Integrating a smart gate with IoT-controlled latches is a moderate trend that can help meet the strict access control requirements of the M.G.L. 780 CMR 52nd Edition / ISPSC pool safety code, reducing liability for Massachusetts homeowners.

What is required before digging fence post holes?

You must contact Mass 811 for a utility locate at least 72 hours before digging. Hitting a gas, electric, or fiber line in Spencer Center is a major liability. A proper installation also includes securing all necessary permits from the Spencer Building Department before work begins.

How deep should my fence posts be set in Spencer Center?

Posts must be set a minimum of 48 inches deep to be below the local frost line. According to IRC standards, posts set shallower will be subject to frost heave forces, leading to premature failure, misalignment, and costly repairs.

How soon can a contractor start a fencing project in Spencer?

For a consultation, a specialist can typically route from the Spencer Town Hall via Route 9 for a 25-35 minute response to your neighborhood. Project start dates depend on material lead times, permit approval, and the current labor schedule averaging $45 per hour.

What are the height and setback rules for fences in Spencer?

Zoning limits are 4 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation directly on the property line. Corner lots near major routes like Route 9 must also maintain clear 'sight triangles' for driver visibility, which can further restrict fence height and placement.

Am I legally required to notify my neighbor before building a fence?

Yes. Under M.G.L. Chapter 49 Section 3, the 'Good Neighbor Fence Law,' you must provide written notice to any adjoining property owner before replacing a shared boundary fence. This is a specific legal requirement for Spencer as of 2026.

What fencing materials work best with Spencer's soil and pest conditions?

Given the moderate soil corrosivity index and moderate termite risk, material compatibility is critical. Use pressure-treated wood rated for ground contact or vinyl. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks and premature failure.

Is my fence designed to handle high winds?

Proper design is mandatory. Spencer's 115 MPH V-ult wind speed rating dictates post spacing, concrete footing size, and bracket strength. Fences not engineered to ASCE 7-22 standards for this load will likely fail during peak storm season gusts.



Scroll to Top
CALL US NOW