Top Fencing Companies in Landover Hills, MD, 20784 | Compare & Call

There are 128 fencing companies server in Landover Hills MD

Rodriguez Fence Construction

Rodriguez Fence Construction

6714 Webster St, Hyattsville MD 20784
Fences & Gates

Rodriguez Fence Construction, founded in 2015 by Edwin Rodriguez and managed by Werner Saavedra, is a family-owned fencing company serving Hyattsville, MD. Licensed and insured, we specialize in fence...

DHL Lawn Services

DHL Lawn Services

★★★★★ 5.0 / 5 (1)
Chillum MD 20782
Landscaping, Fences & Gates, Tree Services

DHL Lawn Services has been a trusted name for homeowners in Chillum, MD, offering expert landscaping, fencing, and tree services. Located just off Riggs Road near the historic Chillum Community Park, ...

A1 Super Services

A1 Super Services

★★★☆☆ 3.4 / 5 (5)
Rockville MD 20852
Handyman, Pressure Washers, Fences & Gates

A1 Super Services is a locally owned and operated home improvement company serving Rockville, MD, for 8 years. Founded as a father-son venture, it has grown into a family business that prioritizes qua...

Kevin Valencia

Kevin Valencia

★★★★★ 5.0 / 5 (1)
Oxon Hill MD 20745
Landscaping, Fences & Gates, Masonry/Concrete

Kevin Valencia offers comprehensive landscaping, hardscape, masonry, concrete, turf, and fence services in Oxon Hill, MD. From artificial turf installation and fence repairs to driveway construction a...

Blue Water Contractor

Blue Water Contractor

Riverdale Park MD 20737
General Contractors, Fences & Gates, Painters

Blue Water Contractor serves Riverdale Park, MD, offering general contracting, fence installation, and painting services. A frequent local issue is fence deterioration due to humid summers and freeze-...

G & G Tree Expert

G & G Tree Expert

307 Dias Dr, Fort Washington MD 20744
Tree Services, Fences & Gates, Decks & Railing

G & G Tree Expert has been serving Fort Washington, MD, and surrounding communities for years, offering a full range of tree services, fencing, and deck construction. Whether you need tree removal, pr...

Samayoa Contractors

Samayoa Contractors

Hyattsville MD 20785
Fences & Gates

Samayoa Contractors is a family-owned fence company based in Hyattsville, MD, with over 15 years of experience serving the DMV area. We specialize in residential and commercial fence and gate installa...

A-1 Landscapes

A-1 Landscapes

Laurel MD 20723
Fences & Gates, Lawn Services, Decks & Railing

A-1 Landscapes, founded in 2018 by Cesar Ojeda, is a Latino-owned, family-run business serving Laurel, MD, and surrounding areas. With over 15 years of hands-on experience in landscaping, hardscaping,...

Weems Welding and Hauling

Weems Welding and Hauling

Lusby MD 20657
Metal Fabricators, Junk Removal & Hauling, Fences & Gates

Weems Welding and Hauling, based in Lusby, MD, offers a comprehensive range of services including metal fabrication, junk removal, and fencing. Our metal fabrication expertise covers mechanical and st...

Remodeling Depot

Remodeling Depot

12 W Church St Unit 233, Frederick MD 21701
General Contractors, Decks & Railing, Fences & Gates

Remodeling Depot is a Frederick, MD-based general contractor that specializes in bathroom, kitchen, and deck remodeling, along with fence and gate services. We focus on delivering a smooth, stress-fre...



Estimated Fencing Costs in Landover Hills, MD

Emergency Fence/Gate RepairStorm / Security Response
$314 - $419
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $69
Standard Driveway Gate InstallEstimated Range
$1,124 - $1,499

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Landover Hills. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

How soon can a consultation be scheduled, and what is the typical response time?

A site consultation can typically be scheduled within 3-5 business days. Our field crew routes from a central dispatch near the Landover Hills Town Hall. Travel to most addresses in the neighborhood via I-495 and local routes takes 25-40 minutes, depending on Beltway traffic. We allocate a 90-minute window for the initial assessment to evaluate property lines, soil conditions, and discuss engineering and zoning requirements specific to your lot.

Why do so many fence posts in Landover Hills Residential fail or lean within a few years?

The 30-inch frost line depth is the primary cause. When posts are set above the frost line, water in the soil freezes and expands, causing frost heave that lifts the post. When it thaws, the post settles back unevenly. This cycle repeats annually, breaking concrete footings. The IRC requires posts to be set a minimum of 12 inches below the local frost line, which means a 42-inch minimum embedment here. Shallow posts will fail.

What is the first step before any digging for a fence project?

You must contact Maryland 811 at least three full business days (excluding weekends and holidays) before excavation. This free service locates and marks public underground utility lines. Hitting a gas, water, or fiber optic line in Landover Hills Residential is a major liability that can result in service outages, massive repair costs, and fines. After utility clearance, you must secure a building permit from the Prince George's County Department of Permitting, Inspections and Enforcement (DPIE); the contractor typically manages this paperwork.

What are the height and placement rules for a fence on my property?

Landover Hills zoning enforces a 4-foot height limit in the front yard and a 6-foot limit in the rear. The setback regulation is 0 feet, meaning you can build directly on your property line, but you must first verify no utility or drainage easements exist there. For corner lots, a critical 'sight triangle' must be maintained. No fence over 3 feet tall is permitted within 25 feet of the intersection of property lines to ensure driver visibility, especially important for homes near the high-traffic I-495 corridor.

Can I install an automated gate on my driveway for security?

Yes, but it must integrate with strict safety codes. Prince George's County Code Subtitle 4, Div 12, requires pool barriers to have self-closing, self-latching gates. For any automated driveway gate, using IoT-enabled smart latches that provide status alerts and automatic closure is now a standard industry practice to meet modern liability standards. This trend addresses the risk of a gate being left open, which could provide access to a pool or pose a security breach.

How do I make sure my fence can withstand storms from the Capital Beltway corridor?

The design must account for the 115 MPH V-ult wind speed rating for this region. This ultimate design wind speed dictates post spacing, concrete footing size, and bracket strength. A standard 8-foot post spacing is often inadequate; 6-foot spacing with larger diameter posts is recommended. Connections must use through-bolts or structural lag screws, not just nails. This engineering ensures the fence can survive peak storm season gusts, which are often funneled and intensified near major highways like I-495.

What is my legal obligation to my neighbor when building a fence in Landover Hills?

Maryland Real Property Code § 11-108, the 'good neighbor law,' governs boundary fences. You must provide written notice to the adjoining property owner at least 30 days before starting work on a shared or partition fence line. This notice must include a description of the proposed fence, materials, and estimated cost. Failure to provide this notice in 2026 can result in liability for damages and potential legal action to halt construction.

What fencing materials last longest in Landover Hills soil and climate?

Material compatibility is dictated by moderate soil corrosivity and a moderate-to-heavy termite risk. Pressure-treated Southern Yellow Pine is a standard for wooden posts, but it requires ground-contact-rated treatment. For superior longevity, aluminum or steel posts with a powder-coated finish are recommended. Use only hot-dip galvanized or stainless-steel fasteners; standard zinc-coated screws will corrode, causing unsightly rust streaks on the fence surface within two years.



Scroll to Top
CALL US NOW