Top Fencing Companies in Texas, MI, 49009 | Compare & Call

There are 42 fencing companies server in Texas MI

J C Fencing

J C Fencing

12955 96th Ave, Marcellus MI 49067
Fences & Gates, Decks & Railing

J C Fencing has served Marcellus, MI, since 2004, building custom fences and providing deck construction, repair, and replacement. We focus on quality craftsmanship for residential properties near Mar...

L & S Home & Property Services

L & S Home & Property Services

★★★★★ 5.0 / 5 (1)
37090 28th Ave, Gobles MI 49055
Tree Services, Snow Removal, Fences & Gates

L & S Home & Property Services, based in Gobles, MI, is your trusted local partner for snow removal, tree care, and fencing solutions. We understand the unique challenges of our community, especially ...

« Previous PagePage 5 of 5Next »


Estimated Fencing Costs in Texas, MI

Emergency Fence/Gate RepairStorm / Security Response
$279 - $374
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$999 - $1,339

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Texas. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

How do you build a fence to withstand 115 MPH winds?

We engineer for the V-ult wind speed of 115 MPH. This rating dictates structural design under ASCE 7-22 standards. To survive peak storm season gusts, we reduce standard post spacing, use deeper concrete footings, and specify heavy-duty galvanized brackets. This increases the fence's ultimate design load capacity, preventing failure during high-wind events common to the region.

What is the legal process for a shared boundary fence in Texas?

Michigan's Boundary Fence Act (MCL 565.481) governs shared boundaries. In 2026, you must provide written notice to the adjoining landowner before constructing or replacing a partition fence. This formal notification is a prerequisite. A current property survey is also required to confirm the exact boundary line before any work begins.

What fencing materials work best for Texas soil and pests?

Material compatibility is key. The moderate soil corrosivity index requires G90 galvanized steel fasteners to prevent rust streaks. Pressure-treated wood must be rated for ground contact. Given the moderate termite risk, avoid untreated wood in direct soil contact. Aluminum or vinyl are low-maintenance alternatives that resist both corrosion and insect damage in this environment.

What are the fence height and placement rules for my corner lot?

Texas zoning limits fences to 3 feet in front yards and 6 feet in rear yards. A 0-foot setback allows installation on the property line with a survey. For corner lots near US-131, you must maintain a clear 'sight triangle' at the intersection. This unobstructed visibility zone is critical for traffic safety and is enforced by the local zoning authority.

Why do fence posts fail in Texas Township?

Posts fail from frost heave. The 42-inch frost line in Michigan requires footings to be set below this depth. Posts set in shallow concrete will lift during freeze-thaw cycles, causing structural failure. We follow IRC R403.1.4 for frost-protected footings to ensure long-term stability in this climate.

Do smart gates meet pool safety codes?

Yes, when properly integrated. The 2024 ISPSC requires a 54-inch minimum height and a self-closing, self-latching gate. Modern Wi-Fi or keypad-operated smart gates can integrate motorized closers and IoT latches that meet these standards. This combination provides both access control and compliance with Michigan's liability requirements for pool barriers.

What is required before digging fence post holes?

You must contact MISS DIG 811 for a utility locate. This free service marks all public underground lines. Hitting a gas, electric, or fiber line in Texas Township is a major liability that can result in fines, repair costs, and service disruptions. We manage the 811 ticket and coordinate all necessary local permit office paperwork before any excavation begins.

How soon can you start a project in Texas Township?

We typically schedule consultations within 5-7 business days. Our route from the Texas Corners landmark via US-131 allows for a consistent 25-35 minute response time to most residential areas in the township. The consultation includes a site assessment, review of your survey, and a detailed project quote based on the current average labor rate of $55 per hour.



Scroll to Top
CALL US NOW