Top Fencing Companies in Blaine, MN, 55014 | Compare & Call

There are 123 fencing companies server in Blaine MN

Fence Concepts

Fence Concepts

17149 Lincoln St NE Ste 100, Andover MN 55304
Fences & Gates

Fence Concepts is a family-owned fencing company based in Ham Lake, MN, with three generations of expertise. Owner Scott began learning the trade as a teenager, digging holes and mixing concrete under...

Peterson Deck Restoration

Peterson Deck Restoration

1880 157th Ln NW, Andover MN 55304
Pressure Washers, Decks & Railing, Fences & Gates

At Peterson Deck Restoration in Andover, MN, we’ve been restoring outdoor spaces for 15 years. As a teacher-owned business, we treat every project with care and precision. We specialize in deck washin...

Carver Electric Swing Gate Repair & Service specializes in repairing and maintaining electric swing gates for residential and commercial properties in Anoka, MN. Local homeowners often face issues lik...

« Previous PagePage 13 of 13Next »


Estimated Fencing Costs in Blaine, MN

Emergency Fence/Gate RepairStorm / Security Response
$339 - $459
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,229 - $1,644

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Blaine. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What is your typical dispatch and consultation timeline for Blaine?

We schedule consultations within 3-5 business days. Our route from the National Sports Center via I-35W to Lexington Park takes 25-35 minutes, depending on traffic. We conduct a 60-minute site assessment to review frost depth, wind exposure, and zoning compliance, followed by a firm quote within 48 hours. The average labor rate for installation is $45 per hour.

Why do fence posts in Blaine's Lexington Park specifically require deep footings?

The frost line depth in Blaine is 42 inches. Posts set above this line are subject to frost heave, which lifts and cracks foundations. IRC standards mandate footings extend below this line to ensure structural stability. In Lexington Park's soil, posts that fail to meet this depth will heave within 1-2 winters, leading to gate misalignment and panel failure.

What are the Blaine zoning rules for fence height and placement?

Blaine code enforces a 4-foot height limit in front yards and 6 feet in rear yards. The 0-foot setback rule allows installation directly on the property line. For corner lots, especially those near I-35W, a clear 'sight triangle' must be maintained. This triangle prohibits any visual obstruction within 25 feet of the street intersection to ensure driver visibility and prevent accidents.

What is the utility locate and permitting process for a Blaine fence?

State law requires contacting Gopher State One Call (811) at least three business days before digging. In Lexington Park, hitting a gas or fiber line is a major liability, incurring repair costs and fines. Our crew manages the Blaine permit office paperwork, submitting site plans that include the 0-foot setback affidavit and a stamped survey for lot line verification.

What are the legal steps for replacing a shared fence in Blaine?

Minnesota Statute 344.03, the 'Good Neighbor Law,' requires written notification to adjacent property owners at least 14 days before altering a shared boundary. As of 2026, this notice must include a material specification sheet. Failure to provide this notice in Blaine can result in a partition fence dispute, requiring mediation and potential cost-sharing litigation.

Which fencing materials are best for Blaine's soil and pest conditions?

Blaine has moderate soil corrosivity and a slight to moderate termite risk. Pressure-treated wood or composite materials are standard. All metal fasteners and hardware must be hot-dip galvanized to prevent rust streaks from corrosive soils. Avoid untreated wood in ground contact, as it is susceptible to subterranean termites common in Lexington Park's older lots.

How does Blaine's wind load rating affect fence design?

Blaine's design wind speed is 115 MPH V-ult per ASCE 7-22 standards. This V-ult rating dictates maximum post spacing, concrete footing mass, and bracket strength. For a 6-foot solid panel fence, posts typically require 8-foot centers with 60-pound footings to resist overturning moments from peak storm season gusts channeled by the National Sports Center grounds.

How do modern gate systems meet both security and safety codes?

Integrated IoT systems, like video intercoms and keypad latches, now meet IBC/IRC pool barrier codes. A 48-inch minimum barrier with a self-closing, self-latching mechanism is required. Modern smart latches provide audit trails and remote locking, satisfying both 2026 smart-gate trends and Minnesota liability standards for automated barrier compliance.



Scroll to Top
CALL US NOW