Top Fencing Companies in Long Lake, MN, 55356 | Compare & Call
There are 43 fencing companies server in Long Lake MN
The Shed & Fence Company is a locally owned and operated fencing contractor serving Saint Bonifacius and the West Metro Minnesota area since 2020. We specialize in both residential and commercial fenc...
A to Z Quality Fencing & Structures is a family-owned fence contractor with over 20 years of experience serving Farmington, MN, and surrounding areas. We specialize in designing and installing long-la...
Minnesota Good Landscapes, led by Jesus Kuyoc, brings over 8 years of landscaping experience to New Hope, MN. Originally from the Yucatan peninsula, Jesus has called Minnesota home for more than 13 ye...
Loonacy Stain is a family-run business in Plymouth, MN, specializing in wood fence and gate restoration, staining, and weatherproofing. We serve homeowners across the Twin Cities, bringing weathered o...
ZTERS is a locally owned and operated service provider in Minneapolis, MN, specializing in dumpster rental, junk pickup, and portable toilet services. Based in the heart of the city, we serve neighbor...
Paul Emilson Fence is a family-owned fencing company based in Ham Lake, MN, serving Minnesota and western Wisconsin since 2003. Founder Paul brings 40 years of hands-on experience, starting his career...
Pressure Titans in Chanhassen, MN, is a residential and commercial cleaning company that specializes in pressure washing, gutter services, and fence and gate maintenance. The business prioritizes clea...
A & M In Ground Pet Fencing, a family-owned business established in 2004, was born from a personal tragedy: the owner lost a beloved pet to a car accident. Determined to prevent such heartbreak for ot...
J&M Hydro Clean provides expert deck construction, repair, and replacement services to homeowners in Howard Lake, MN. Serving the area near the shores of Howard Lake and the surrounding neighborhoods,...
Quality Fence & Repair, based in Zimmerman, MN, is a locally owned and operated company that has built its reputation on careful craftsmanship and genuine customer care. Every project—whether a small ...
Estimated Fencing Costs in Long Lake, MN
Q&A
How is a fence engineered to survive high winds in this area?
Design uses the 115 MPH V-ult wind speed rating. This ultimate design wind speed from ASCE 7-22 standards dictates post spacing, concrete footing mass, and bracket strength. Proper engineering ensures the fence survives peak storm season gusts without racking or panel failure.
What are the height and placement rules for a fence on my property?
Long Lake zoning limits fences to 4 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowed on the property line. Corner lots near US-12 require management of visibility 'sight triangles' at intersections. Fences cannot obstruct driver sightlines within 10 feet of the curb line.
Why are fence posts in Long Lake failing at the base?
Posts fail from frost heave when footings are set above the 42-inch frost line. The International Residential Code (IRC) requires footings to extend below this depth in Long Lake City Center to prevent seasonal lift and structural failure. Concrete piers poured below the frost line provide permanent stability.
Am I legally required to notify my neighbor before building a fence on the property line?
Yes. Minnesota Statute 344.03, the partition fence law, requires you to provide written notice to any neighbor sharing the boundary line before construction in Long Lake. This 2026 legal requirement initiates a formal process for cost-sharing and dispute resolution for the shared structure.
How soon can a crew start a fencing project in Long Lake?
A crew can typically mobilize within 10-14 days after permit approval. The consultation route from Holbrook Park via US-12 takes 35-45 minutes, accounting for local traffic. We schedule site evaluations to confirm property lines and discuss footing depth requirements against the frost line.
How do Long Lake's soil and pest conditions affect fence material choice?
Moderate soil corrosion and slight to moderate termite risk demand material compatibility. Use pressure-treated wood rated for ground contact or corrosion-resistant metals like aluminum. Fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks from chemical reactions in the soil.
What is the first step before any digging for a fence project?
Call Gopher State One Call at least three business days before excavation. Hitting a utility line in Long Lake City Center is a major liability and safety hazard. A professional manages this locate service and concurrently files any required paperwork with the city permit office to avoid project delays.
Do smart gates and electronic latches meet Minnesota's pool safety code?
Yes. Integrated IoT gate systems can meet the state's pool code requiring a self-closing, self-latching mechanism operable from inside and outside. The latch must automatically engage and integrate with access control. This smart-gate trend addresses modern liability standards for homeowners with pools.
