Top Fencing Companies in Overland, MO, 63114 | Compare & Call

Posts must extend below the 30-inch frost line, as per IRC Section R403.1.4. In Central Overland, posts set shallower will lift from frost heave, breaking rails and compromising structural stability. All footings here use a 12-inch diameter concrete base to anchor against this seasonal movement.

No. A design for Overland's 115 MPH V-ult wind speed is required. This engineering standard from ASCE 7-22 dictates closer post spacing (often 6 feet on-center), deeper footings, and wind-rated brackets. This prevents failure during peak storm season gusts, which are channeled by structures near I-170.

Yes. While Missouri has no cost-sharing statute, Overland common law and local ordinance require written notice to adjoining property owners before altering a shared boundary, or 'partition fence.' This 2026 requirement prevents disputes and establishes a clear record of the improvement. Provide a copy of your property survey.

Yes. Modern IoT gate operators integrate with self-closing, self-latching hardware, a requirement under St. Louis County and Overland amendments to the International Swimming Pool and Spa Code. A unified system provides remote access while maintaining the constant barrier needed to limit liability for Missouri homeowners.

You must contact Missouri 811 at least three business days before excavation. Hitting a buried utility line in Central Overland carries major financial and safety liability. Our crew manages the 811 ticket and coordinates any necessary Overland permit office paperwork to ensure the project starts with full clearance.

We dispatch a project manager for an on-site consultation typically within 1-2 business days. From our staging near Wild Acres Park, the route via I-170 to most Central Overland locations results in a consistent 15 to 25 minute travel time for the initial assessment and quote.

Use pressure-treated wood rated for ground contact or steel posts with a polymer coating. The area's moderate soil corrosivity index and moderate-to-heavy termite risk demand this. For steel components, specify hot-dip galvanized or stainless steel fasteners to prevent rust streaks from forming on the finish.

Overland zoning limits fences to 4 feet in front yards and 6 feet in rear yards. A 0-foot setback is allowed on the property line with a certified survey. For corner lots, especially near I-170, you must maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high within 25 feet of the curb.