Top Fencing Companies in Magnolia, MS, 39648 | Compare & Call

There are 61 fencing companies server in Magnolia MS

Southern Fencing

Southern Fencing

211 Enochs St, Tylertown MS 39667
Fences & Gates

Southern Fencing, located in Tylertown, MS, provides expert fence and gate solutions to homeowners and businesses throughout the area. A common local issue is the region's clay-heavy soil, which shift...

« Previous PagePage 7 of 7Next »


Estimated Fencing Costs in Magnolia, MS

Emergency Fence/Gate RepairStorm / Security Response
$249 - $339
Wood Privacy Fence (Per LF)Estimated Range
$24 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$894 - $1,199

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Magnolia. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What is the utility locate process before digging a fence line?

Mississippi 811 must be contacted at least three business days before excavation. In the historic district, hitting a gas, water, or fiber line is a major liability. The service provides free marking. All permit paperwork from the Magnolia permit office requires proof of this locate ticket before approval.

What fencing materials work best with Magnolia's termite risk and soil?

The area has a Very Heavy termite risk and Moderate soil corrosivity. Pressure-treated wood requires ground-contact rated treatment. Wrought iron or aluminum are non-combustible alternatives. Use stainless steel or hot-dip galvanized fasteners to prevent rust streaks from the corrosive soil profile.

How deep should fence posts be set in Magnolia to avoid frost heave?

Posts require a footing depth of at least 6 inches below the local frost line. In the Magnolia Historic District, shallow posts are a common failure point. The IRC requires posts to resist uplift from frost. A footing below the 6-inch line prevents heave that can warp panels and pop post anchors.

How is a fence engineered for Magnolia's 115 MPH wind load?

The 115 MPH V-ult wind speed dictates structural design. Post spacing must be reduced, and concrete footings must be sized for uplift. Brackets and hardware must meet ASCE 7-22 standards for high-wind regions. This engineering prevents failure during peak storm season gusts, especially on exposed lots.

What are the legal steps for replacing a shared fence in Mississippi?

Mississippi Code Section 69-27-301, the 'Good Neighbor' law, requires formal written notice to adjacent property owners before altering a shared boundary. In Magnolia, this 2026 legal step is mandatory. A written proposal prevents disputes over the partition fence's cost, style, and maintenance responsibility.

What is the typical timeline and route for a consultation?

A site consultation can be scheduled within 48-72 hours. The standard route from Magnolia Town Square uses I-55 for access, resulting in a 15-20 minute response time to most historic district properties. This allows for an immediate zoning and site-condition assessment.

What are the fence height and setback rules for Magnolia, MS?

Zoning limits are 4 feet for front yards and 8 feet for rear yards. A 0-foot setback allows installation directly on the property line. Corner lots near I-55 must maintain a clear 'sight triangle' for traffic visibility. The ordinance restricts any fence that blocks driver sight lines at intersections.

How do smart gate systems integrate with pool safety codes?

Modern IoT-integrated gate systems can be programmed with self-closing and self-latching mechanisms. These features directly satisfy the IBC/IRC Appendix AG pool barrier requirements for Mississippi. A smart latch provides an audit trail, which strengthens liability defense in case of an incident.



Scroll to Top
CALL US NOW