Top Fencing Companies in Newton, MS, 39345 | Compare & Call
There are 139 fencing companies server in Newton MS
Wade’s Landscape & Design is a locally owned fencing company based in Brandon, Mississippi, and proudly serves the Madison community as well. We specialize in fence and gate installation, repair, drai...
Birch Construction is a locally owned and operated company based in Jackson, MS, offering a wide range of outdoor improvement services. From fence and gate installation, repair, and staining to masonr...
Harper Landscaping Solutions is a locally owned and operated landscaping company serving Jackson, MS, with over 13 years of industry experience. We offer a full range of services including gardening, ...
Bell Fence Manufacturing has been serving Jackson, MS since 1946, providing durable fence and gate solutions for homes and businesses. We specialize in ornamental aluminum, ornamental iron, chain link...
Precision Landscape & Design is a locally owned landscaping company serving Brandon, MS, and the surrounding areas. We specialize in a full range of services, including custom deck construction, desig...
Welch's Custom Ironwork, based in Raymond, MS, specializes in designing and fabricating custom ironwork that reflects each client's personality. With over 20 years of combined experience, we build all...
Dale Smith Fences & Decks has been serving Richland, MS, and the surrounding areas for years, helping homeowners tackle common fencing and decking issues caused by Mississippi's humid climate. From wo...
Do it all Pat is a trusted provider of fencing, landscaping, and junk removal services in Flowood, MS, and the surrounding Rankin County area. With a hands-on approach, Pat takes pride in doing every ...
Freedom Fence Company, serving Brandon, MS, is a licensed contractor specializing in fences, gates, decks, and railings. We build, repair, and replace wood, vinyl, chain link, aluminum, and wrought ir...
Tucker's Fences And Decks serves Florence, MS, and the surrounding areas, providing expert deck and fence construction, repair, and maintenance. The company understands that the local climate, with it...
Estimated Fencing Costs in Newton, MS
Frequently Asked Questions
What are Newton's fence height and placement rules?
Zoning limits are 4 feet for front yards and 8 feet for rear yards. A 0-foot setback is allowed on side and rear property lines. Corner lots near I-20 must maintain a clear 'sight triangle'—typically a 10-foot area from the curb—with no obstructions over 3 feet high for driver visibility.
What fencing materials hold up against Newton's termites and soil?
Very heavy termite risk rules out wood posts in ground contact. Use pressure-treated lumber rated for direct burial or switch to vinyl, composite, or steel. Moderate soil corrosivity requires galvanized or stainless-steel fasteners; standard hardware causes rust streaks on light-colored materials within 18 months.
Do modern pool fences require smart latches?
The 2024 IRC Appendix AG and IBC mandate self-closing, self-latching gates for pool barriers. While smart-gate IoT integration has low adoption here, an integrated latch that logs access meets evolving liability standards for Mississippi homeowners, providing a verifiable audit trail.
How deep should fence posts be in Newton to avoid frost heave?
Posts require a 12-inch footing depth minimum to pass below the Newton frost line. The 2021 IRC requires foundations to resist frost heave. In Downtown Newton, shallow posts fail within two winters, causing racking and gate misalignment.
How is a fence engineered for Newton's 115 MPH wind rating?
A 115 MPH V-ult wind speed under ASCE 7-22 standards dictates structural design. This requires reduced post spacing (often 6 feet on-center), concrete footings with a diameter-to-depth ratio of 3:1, and through-bolt connections, not just screws, to survive peak storm season gusts from the I-20 corridor.
How soon can a fencing contractor start a project in Newton?
A standard project schedules a site consultation within 48 hours. From Newton City Hall, the route via I-20 to most Downtown Newton properties allows a 15-20 minute response. The consultation assesses zoning compliance, wind load specifics, and provides a firm timeline based on current $24/hr labor rates.
What is required before digging fence post holes in Downtown Newton?
Call Mississippi 811 for a utility locate at least three business days before excavation. Hitting a buried line in Downtown Newton near City Hall incurs major repair costs and liability. The Newton permit office requires the 811 ticket number and a site plan showing the fence line relative to property pins.
What are the neighbor notification rules for a boundary fence in Mississippi?
Mississippi Code § 69-27-307, the 'good neighbor' law, mandates written notice to adjoining owners 30 days before altering a shared partition fence. Since 2026, Newton requires certified mail receipt for projects on the property line. This prevents disputes over material or cost sharing.
