Top Fencing Companies in Charlotte, NC, 28078 | Compare & Call
There are 116 fencing companies server in Charlotte NC
Atlas Fence Company, a family-owned business established in 1952, serves Greensboro, NC, and the surrounding area with residential and commercial fencing, gates, and related services. We offer a wide ...
Quality Fence Builders, located in High Point, NC, is a licensed and insured fencing company serving residential and commercial clients throughout the Triad area. We combine experienced labor and mode...
River Bank Outdoors in Thomasville, NC, specializes in fence and gate services, offering installation, repair, painting, staining, and weatherproofing for both manual and automatic gates. Known for ex...
C & G Fencing, LLC has been serving Winston-Salem and the surrounding Piedmont Triad area since 2017. Our focus is on delivering quality fence and gate installation, repair, painting, staining, and we...
Your home repair solution. Triad Extra Hands is a family-owned home services provider based in Browns Summit, NC, with over 15 years of experience. We offer a wide range of services including fencing ...
R&R Fencing, a family-owned and -operated fencing contractor based in Sophia, NC, brings over 22 years of experience to residential and commercial projects throughout the Piedmont Triad. Specializing ...
Shotwell Fabrication & Fencing, based in Thomasville, NC, has been serving the local community with expert deck construction, fencing, and gate services. We specialize in a wide variety of materials i...
Lakenridge Builders
Lakenridge Builders Inc., a family-owned company founded by Jamie Campbell in 2001, has been serving Greensboro and the surrounding Triad Area for over two decades. With extensive experience in custom...
Holman Fence LLC, founded by Randall Holman in 2013, has served the Kernersville, NC area for over 20 years, specializing in custom fences, gates, decks, and railings. With a focus on quality workmans...
Since 1955, Fence Builders in Winston-Salem, NC has been a trusted provider of residential and commercial fencing solutions. As a licensed general contractor serving North Carolina and the Southeast, ...
Estimated Fencing Costs in Charlotte, NC
Questions and Answers
What happens if you hit a utility line?
It is a major financial and safety liability. State law requires contacting NC 811 at least three full business days before any dig. In dense Uptown neighborhoods, gas, fiber, and electrical lines are often mis-marked or shallow. We use a detailed site plan from the permit office to cross-reference utility markings. Our contract includes a 'line strike' liability clause, but proper locating makes this a near-zero risk.
Will my fence posts heave during a Charlotte winter?
Yes, if footings are shallow. The Charlotte frost line depth of 8 inches is a structural minimum, not a suggestion. Posts set above this depth in Uptown soil will lift from frost heave, racking panels and breaking fasteners. IRC Section R403.1.4 mandates footings below the frost line. For a 4-foot front fence, we use 24-inch deep concrete piers to anchor posts below the frost line and resist V-ult wind uplift.
Do smart gates meet North Carolina pool safety codes?
They must, to limit liability. NC Residential Code Appendix AG requires a 48-inch high barrier with self-closing, self-latching hardware. A 2026 smart gate integrates IoT-controlled latches that log every open/close event and auto-engage. This digital audit trail proves compliance during inspections. For Uptown homes, we hardwire these systems with a battery backup to ensure the latch engages even during a power outage.
Why do some fences in Charlotte rust or rot quickly?
Material failure stems from soil and pest conditions. Charlotte has moderate soil corrosivity and moderate-to-heavy termite risk. Pressure-treated pine must be rated for ground contact (UC4A) and use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. For vinyl or composite, we specify solid polymer posts, not hollow ones, which can fill with water, freeze, and crack below the frost line.
Is a standard fence strong enough for Charlotte storms?
No. A 115 MPH V-ult wind speed rating under ASCE 7-22 standards dictates the design. For Uptown, which gets channeled wind off I-277, we reduce standard 8-foot post spacing to 6 feet on center. We use 4x4 posts with concrete footings and galvanized hurricane brackets, not just nails. This system is engineered to withstand the peak storm season gusts without creating airborne debris.
How soon can you start a project in Uptown Charlotte?
Consultation typically occurs within 2-3 business days. Our standard dispatch route from Romare Bearden Park uses I-277 for direct arterial access, ensuring a 25-35 minute response window for most Uptown addresses. After the site survey and NC 811 clearance, permit submission with the City of Charlotte takes 10-15 business days. With materials on hand, physical work can start within 5 days of permit issuance.
Am I legally required to talk to my neighbor before building a fence?
For a boundary line fence, yes. North Carolina Common Law, including NC General Statute 84-1, governs 'partition fences.' As of 2026, Charlotte requires formal written notice to adjoining property owners for any replacement of a shared boundary fence. This establishes shared maintenance responsibility and prevents future disputes. In Historic District Overlay (HD-O) areas like parts of Uptown, this notification is also a permit prerequisite.
How high can I build my fence in Charlotte?
Height is dictated by location. Zoning enforces a 4-foot maximum in the front yard and 8 feet in the rear. The 0-foot setback means you can build directly on the property line, but corner lots have critical 'sight triangle' restrictions. Near high-traffic corridors like I-277, fences within 30 feet of the intersection corner must be under 3 feet to maintain driver visibility. We survey these sight lines before setting the first post.