Top Fencing Companies in Charlotte, NC, 28078 | Compare & Call
There are 116 fencing companies server in Charlotte NC
Cornerstone Fencing Solutions is a family-owned fencing company founded in 2015 in Kernersville, NC. What started as a small operation, distributing flyers door-to-door, has grown into a trusted provi...
M&C Fences serves homeowners and businesses across Winston-Salem, NC, with professional fence and gate services. From wood, vinyl, aluminum, and chain link fence installations to custom gates, manual ...
On Time Construction and Fencing is a family-owned business based in Lexington, NC, serving the Triad region. We specialize in building and repairing fences, gates, decks, and railings for residential...
Carolina Fence And Rails
Carolina Fence And Rails is a family-owned small business based in Thomasville, NC, serving the Triad area for over 10 years. We specialize in fence and gate installation, repair, painting, staining, ...
Triad Fence & Outdoor Works is a new professional company serving Walkertown, NC, and the Piedmont Triad area. We specialize in fence and gate installation, offering wood, vinyl, chain-link, and custo...
Hurt Free Solutions, based in High Point, NC, offers a transparent approach to junk removal, fencing, and landscaping. Unlike many competitors, we refuse to enforce mandatory minimum fees—you pay only...
L4 Fencing Solutions provides expert fence and gate installation, painting, staining, repair, and weatherproofing throughout Lexington, NC. Many local homeowners deal with problems from the area's hum...
Carolina Pressure Washing
Carolina Pressure Washing, a family-owned business based in Kernersville, NC, brings over 10 years of experience to residential and commercial exterior cleaning across the Triad area. Using the newest...
Jim Brown Welding, based in Trinity, NC, specializes in deck construction, repair, replacement, and custom metal fabrication. Located near the intersection of NC-62 and Finch Farm Road, just minutes f...
Barefoot Deck Maintenance and Sealing
Serving Kernersville, NC, Barefoot Deck Maintenance and Sealing specializes in deck and fence care, including construction, repair, staining, and weatherproofing. Many local homes face fencing issues ...
Estimated Fencing Costs in Charlotte, NC
Questions and Answers
What happens if you hit a utility line?
It is a major financial and safety liability. State law requires contacting NC 811 at least three full business days before any dig. In dense Uptown neighborhoods, gas, fiber, and electrical lines are often mis-marked or shallow. We use a detailed site plan from the permit office to cross-reference utility markings. Our contract includes a 'line strike' liability clause, but proper locating makes this a near-zero risk.
Will my fence posts heave during a Charlotte winter?
Yes, if footings are shallow. The Charlotte frost line depth of 8 inches is a structural minimum, not a suggestion. Posts set above this depth in Uptown soil will lift from frost heave, racking panels and breaking fasteners. IRC Section R403.1.4 mandates footings below the frost line. For a 4-foot front fence, we use 24-inch deep concrete piers to anchor posts below the frost line and resist V-ult wind uplift.
Do smart gates meet North Carolina pool safety codes?
They must, to limit liability. NC Residential Code Appendix AG requires a 48-inch high barrier with self-closing, self-latching hardware. A 2026 smart gate integrates IoT-controlled latches that log every open/close event and auto-engage. This digital audit trail proves compliance during inspections. For Uptown homes, we hardwire these systems with a battery backup to ensure the latch engages even during a power outage.
Why do some fences in Charlotte rust or rot quickly?
Material failure stems from soil and pest conditions. Charlotte has moderate soil corrosivity and moderate-to-heavy termite risk. Pressure-treated pine must be rated for ground contact (UC4A) and use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. For vinyl or composite, we specify solid polymer posts, not hollow ones, which can fill with water, freeze, and crack below the frost line.
Is a standard fence strong enough for Charlotte storms?
No. A 115 MPH V-ult wind speed rating under ASCE 7-22 standards dictates the design. For Uptown, which gets channeled wind off I-277, we reduce standard 8-foot post spacing to 6 feet on center. We use 4x4 posts with concrete footings and galvanized hurricane brackets, not just nails. This system is engineered to withstand the peak storm season gusts without creating airborne debris.
How soon can you start a project in Uptown Charlotte?
Consultation typically occurs within 2-3 business days. Our standard dispatch route from Romare Bearden Park uses I-277 for direct arterial access, ensuring a 25-35 minute response window for most Uptown addresses. After the site survey and NC 811 clearance, permit submission with the City of Charlotte takes 10-15 business days. With materials on hand, physical work can start within 5 days of permit issuance.
Am I legally required to talk to my neighbor before building a fence?
For a boundary line fence, yes. North Carolina Common Law, including NC General Statute 84-1, governs 'partition fences.' As of 2026, Charlotte requires formal written notice to adjoining property owners for any replacement of a shared boundary fence. This establishes shared maintenance responsibility and prevents future disputes. In Historic District Overlay (HD-O) areas like parts of Uptown, this notification is also a permit prerequisite.
How high can I build my fence in Charlotte?
Height is dictated by location. Zoning enforces a 4-foot maximum in the front yard and 8 feet in the rear. The 0-foot setback means you can build directly on the property line, but corner lots have critical 'sight triangle' restrictions. Near high-traffic corridors like I-277, fences within 30 feet of the intersection corner must be under 3 feet to maintain driver visibility. We survey these sight lines before setting the first post.