Top Fencing Companies in Dallas, NC, 28034 | Compare & Call

There are 125 fencing companies server in Dallas NC

Shotwell Fabrication & Fencing

Shotwell Fabrication & Fencing

★★★★★ 5.0 / 5 (1)
Thomasville NC 27360
Decks & Railing, Fences & Gates

Shotwell Fabrication & Fencing, based in Thomasville, NC, has been serving the local community with expert deck construction, fencing, and gate services. We specialize in a wide variety of materials i...

Lakenridge Builders

Lakenridge Builders

★★★★☆ 4.0 / 5 (4)
3718 Edgewood Dr, Greensboro NC 27406
General Contractors, Fences & Gates, Decks & Railing

Lakenridge Builders Inc., a family-owned company founded by Jamie Campbell in 2001, has been serving Greensboro and the surrounding Triad Area for over two decades. With extensive experience in custom...

Holman Fence

Holman Fence

★★★★☆ 4.2 / 5 (10)
9627 W Market St, Kernersville NC 27284
Fences & Gates, Decks & Railing

Holman Fence LLC, founded by Randall Holman in 2013, has served the Kernersville, NC area for over 20 years, specializing in custom fences, gates, decks, and railings. With a focus on quality workmans...

Fence Builders

Fence Builders

★★★☆☆ 3.1 / 5 (8)
1230 Old Salisbury Rd, Winston-Salem NC 27127
Fences & Gates

Since 1955, Fence Builders in Winston-Salem, NC has been a trusted provider of residential and commercial fencing solutions. As a licensed general contractor serving North Carolina and the Southeast, ...

Granados Tree Service

Granados Tree Service

504 Salem St, Thomasville NC 27360
Tree Services, Fences & Gates, Gutter Services

Granados Tree Service LLC, founded in 2015 by brothers Kevin and Melvin Granados, is a family-run business with nearly a decade of experience serving Thomasville, NC, and the surrounding 100-mile radi...

A and K Quality Fencing

A and K Quality Fencing

★★★★★ 5.0 / 5 (2)
High Point NC 27263
Fences & Gates

A and K Quality Fencing is a family-owned fencing company based in High Point, NC, founded in 2010. What started as a dream to build a better future for our two daughters has grown into a trusted loca...

J & S Fencing and Trenching

J & S Fencing and Trenching

Seagrove NC 27341
Fences & Gates, Ranches

J & S Fencing and Trenching provides reliable fence and gate installation, repair, staining, and weatherproofing for Seagrove, NC homeowners. Seagrove’s sandy soil and frequent storms can cause wooden...

Sevcon Carpentry

Sevcon Carpentry

★★★★★ 5.0 / 5 (1)
Winston-Salem NC 27103
Sheds & Outdoor Storage, Fences & Gates, Decks & Railing

Sevcon Carpentry, based in Winston-Salem, NC, brings 15 years of hands-on experience in construction to every project. We specialize in building and repairing decks, fences, and gates, with a focus on...

Hardin Fence And Repair

Hardin Fence And Repair

★★★★★ 5.0 / 5 (1)
Climax NC 27233
Fences & Gates

Hardin Fence And Repair in Climax, NC, specializes in a full range of fencing services for both residential and commercial properties. Since 2020, this small, locally owned company has served the Tria...

Aviles Remodeling

Aviles Remodeling

579 Skycrest Country Rd, Asheboro NC 27205
General Contractors, Fences & Gates, Windows Installation

Aviles Remodeling is a family-owned business that started with three people handling small repair and upgrade projects for friends and family in Asheboro, NC. Word of mouth spread quickly because of o...



Estimated Fencing Costs in Dallas, NC

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Dallas. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

What is the utility locate process before digging in Downtown Dallas?

You must contact NC811 at least three full business days before excavation. They coordinate with all utility companies to mark public lines. Hitting an unmarked private line or a city main in this neighborhood is a major liability. We manage the permit office paperwork concurrently to ensure the project schedule stays on track.

What are the height and setback rules for a fence on my Dallas property?

Zoning limits are 4 feet in front yards and 8 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, visibility 'sight triangles' are enforced. Near I-85, these clear zones are critical for driver safety and are strictly regulated by the city's public works department.

What fencing materials hold up best against Dallas's termite and soil conditions?

With a Very Heavy termite risk and Moderate soil corrosivity, material compatibility is key. Pressure-treated wood must be rated for ground contact. For metal posts and fasteners, use hot-dip galvanized steel or aluminum to prevent rust streaks from corrosive soils. Avoid untreated wood and standard steel.

How soon can a specialist visit my property for a consultation?

A structural perimeter specialist can typically be dispatched within 48 hours. The standard route from the Dallas Historic Courthouse uses I-85 for direct access, resulting in a 25-35 minute response window for most addresses in the Downtown Dallas service area.

How do modern gate systems meet NC pool safety and security needs?

NC Residential Building Code Appendix AG requires self-closing, self-latching gates for pool enclosures. Integrating a moderate-trend smart gate with IoT latches provides remote monitoring and automatic closure logs. This combination meets the code for passive safety while creating a digital record for liability protection.

Why do fence posts in Downtown Dallas require deep footings?

The local frost line is 8 inches. Posts set above this depth are subject to frost heave, which will lift and crack the structure. The IRC requires footings to extend below this line to prevent failure. In Downtown Dallas, we engineer footings to 12 inches for a stable base against seasonal freeze-thaw cycles.

How is a fence engineered for the 115 MPH V-ult wind load in Dallas?

The 115 MPH V-ult wind speed is an ultimate design load per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket strength. For a fence in Dallas to survive peak storm season gusts off I-85, we calculate specific post embedment and use wind-rated hardware to resist overturning.

Am I legally required to notify my neighbor before installing a fence in Dallas, NC?

Yes. Under NC General Statute 84-1, a 'partition fence' on a shared boundary is a shared responsibility. The 2026 interpretation requires written notice to adjoining landowners before replacing or altering a shared fence line. This formal notification is a critical step to avoid future disputes.



Scroll to Top
CALL US NOW