Top Fencing Companies in Dana, NC, 28724 | Compare & Call

There are 192 fencing companies server in Dana NC

Blue Hammer

Blue Hammer

★★★★☆ 4.0 / 5 (2)
Cape Fear NC 28401
General Contractors, Roofing, Fences & Gates

Blue Hammer, based in Cape Fear, NC, is a general contracting, roofing, and fencing company founded in 2023 by Nic Norris. With over 20,000 hours of hands-on construction experience, Nic brings a deep...

The Clean Property Guy

The Clean Property Guy

★★★★★ 5.0 / 5 (1)
Leland NC 28451
Junk Removal & Hauling, Fences & Gates, Handyman

The Clean Property Guy is a local handyman and junk removal service serving Leland, NC, and the surrounding areas. They specialize in a wide range of home maintenance tasks, from basic plumbing repair...

Jackson Outdoor Services

Jackson Outdoor Services

Southport NC 28461
Fences & Gates

Jackson Outdoor Services, based in Southport, NC, specializes in fence and gate solutions for local homeowners. From installing new wood or vinyl fences to repairing storm-damaged gates, we handle it ...

Construction East

Construction East

Beulaville NC 28518
Decks & Railing, Fences & Gates, Countertop Installation

Construction East, LLC is a family-owned and operated business based in Beulaville, NC, serving residential and commercial clients across Eastern North Carolina. We specialize in decks and railing, fe...

T & D Contracting

T & D Contracting

Hampstead NC 28443
Landscaping, Pressure Washers, Fences & Gates

T&D Contracting, owned by Devin and Travis, has been serving Hampstead, NC, for over eight years. We specialize in landscaping, pressure washing, fences, gates, patio and deck construction, and excava...

Eric & Sons Pressure Washing & Fencing

Eric & Sons Pressure Washing & Fencing

500 Vinson Blvd, Whiteville NC 28472
Fences & Gates, Pressure Washers

Eric & Sons Pressure Washing & Fencing has been serving Whiteville and surrounding areas since 2000. As a family-owned business run by a 33-year-old husband and father of three, every project receives...

Custom Remodels

Custom Remodels

Morehead City NC 28557
Fences & Gates, Decks & Railing, General Contractors

Custom Remodels is a locally owned and operated construction company serving Morehead City, NC, and the surrounding Carteret County area. Founded by two professionals with a combined 15 years of exper...

Handy andys

Handy andys

Wilmington NC 28409
Handyman, Pressure Washers, Fences & Gates

Handy Andys is a locally owned and operated handyman, pressure washing, and fencing service based in Wilmington, NC. Founded by twin brothers Trey and Trevor Eason, who are Wilmington natives, the bus...

Legacy Home Solutions

Legacy Home Solutions

Hampstead NC 28443
Fences & Gates, Landscaping, Pressure Washers

Legacy Home Solutions is a family-owned business based in Hampstead, NC, specializing in fences and gates, landscaping, and pressure washing. With a focus on quality and reliability, we offer fence an...

Royal Endeavors Fencing and Railing

Royal Endeavors Fencing and Railing

★★★☆☆ 3.4 / 5 (5)
Supply NC 28462
Fences & Gates, Decks & Railing

Royal Endeavors Fencing and Railing, based in Supply, NC, offers professional deck and fence services across Brunswick County. Specializing in both beauty and durability, the company provides deck con...



Estimated Fencing Costs in Dana, NC

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Dana. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

Will my fence posts heave out of the ground during a cold winter in Dana?

Yes, posts will heave if not set below the frost line. The Dana Central area has a 12-inch frost line. The International Residential Code (IRC) requires footings to extend below this depth to prevent frost heave, which is the primary cause of post failure and racking in this neighborhood.

What are the height and placement rules for a fence on my property in Dana?

Dana zoning limits fences to 4 feet in front yards and 8 feet in rear yards. The setback is 0 feet, permitting construction directly on the property line. For corner lots, especially those near US-25, a clear 'sight triangle' must be maintained for driver visibility, which overrides the standard height limit in that zone.

Am I legally required to talk to my neighbor before replacing our shared fence in Dana, NC?

Yes. NC General Statute 160D-906, the 'good neighbor' law, requires written notice to adjoining property owners before constructing or replacing a partition fence on the property line. As of 2026, this notification is a mandatory step prior to obtaining a permit from the town.

How do Dana's soil and insect conditions affect my choice of fencing material?

Material compatibility is critical. The area has low to moderate soil corrosivity and a moderate to heavy termite risk. Use pressure-treated wood rated for ground contact or composite materials. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks that stain the fence and degrade its structure.

Is a standard fence design strong enough for the wind in Dana?

No. Dana's design wind speed is 105 mph V-ult. This engineering rating dictates post spacing, concrete footing size, and bracket strength. A fence not designed to ASCE 7-22 standards for this wind load will likely fail during peak storm season gusts, especially in exposed areas.

What is required before you dig the first post hole?

State law requires a utility locate request through North Carolina 811. Hitting a buried line in Dana Central is a major liability causing service disruption and fines. Our process includes managing the 811 ticket and all associated permit office paperwork to ensure a compliant start.

What are the modern security and safety requirements for a fence with a gate?

Gates must meet NC Residential Code AG105 for pool barriers, requiring self-closing, self-latching mechanisms. While smart-gate IoT integration is not yet a major trend here, an integrated electronic latch can provide audit trails that help meet evolving liability standards for North Carolina homeowners.

How soon can a specialist visit my property for a consultation?

We typically schedule consultations within 48 hours. For a property in Dana Central, our route originates near Dana Elementary School, proceeds via US-25, and results in a 15-20 minute response time for an on-site structural and zoning assessment.



Scroll to Top
CALL US NOW