Top Fencing Companies in Enfield, NC, 27823 | Compare & Call
There are 38 fencing companies server in Enfield NC
Carteret Fencing Solutions
Carteret Fencing Solutions is a locally owned and operated company serving Swansboro, NC, and the surrounding area. Co-owners bring deep roots: one grew up in Swansboro, learning construction from her...
Ryan's Outdoor Property Maintenance
Ryan's Outdoor Property Maintenance provides professional fencing, pressure washing, and lawn services to residential and commercial clients in Midway Park, NC. Located conveniently near the intersect...
Southern Smith Construction serves homeowners and businesses in Jacksonville, North Carolina, as a full-service general contractor specializing in roofing, fencing, and remodeling. With a focus on dur...
Miles Construction
Miles Construction has been serving homeowners in Stella, NC, and the surrounding coastal communities for years. Many homes in this area experience fencing issues due to the humid, salty air and occas...
As a Havelock native and Marine Corps veteran, I founded Eastern Edge in 2016 with a mission to deliver quality construction services. Starting with fence installation, we've grown to offer bathroom r...
Fosler Fencing serves Hubert, NC, offering expert fence and gate services including installation, repair, painting, staining, and weatherproofing. Local homeowners often face issues like rotting wood ...
His N Hers ALL-PRO Home Services
His N Hers ALL-PRO Home Services, based in Hubert, NC, brings over 20 years of hands-on experience in HVAC, electrical, gaming, and home improvement. As a small construction company, we specialize in ...
Bogue Sound Fencing is a locally owned fence and gate company serving Morehead City, NC, and the surrounding Crystal Coast communities. Located just minutes from the Morehead City waterfront and the h...
Dogwood Creek Marine and Land Construction, based in Morehead City, NC, specializes in custom decks and fencing for coastal homes. Many local homes face fencing issues due to salty air, high winds, an...
Parson Co. - Restoration & Design
Parson Co. - Restoration & Design is a trusted local company serving New Bern, NC, specializing in carpentry, fence and gate installation, and landscape design. Many homes in historic neighborhoods li...
Estimated Fencing Costs in Enfield, NC
Questions and Answers
Am I required to notify my neighbor before building a fence?
Yes. Under North Carolina General Statutes Chapter 1 (Boundary Law), you have a legal duty to notify adjoining landowners before replacing a shared partition fence. Since 2026, sending a written notice via certified mail is the standard practice in Enfield to avoid disputes over property lines and cost-sharing.
How deep should my fence posts be in Enfield?
Posts must be set at least 12 inches deep, below the local frost line. In Downtown Enfield, frost heave can lift shallow-set posts out of alignment within a single winter. The 2021 IRC (Section R403) and local code enforce this for structural stability against frost and the 115 MPH V-ult wind load rating.
Is a standard fence strong enough for Enfield's wind?
No. A 115 MPH V-ult wind load rating is a high-hazard designation. Standard 8-foot post spacing often fails. Engineering to ASCE 7-22 standards requires closer post spacing (6 feet or less), concrete footings below frost, and wind-rated brackets to survive peak storm season gusts, especially in open areas.
What are Enfield's height and placement rules for fences?
Zoning limits are 4 feet for front yards and 6 feet for rear yards. The setback is 0 feet, meaning you can build directly on your property line. For corner lots, especially those near US-301, you must maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high within 25 feet of the corner for driver visibility.
How soon can you start a project in Downtown Enfield?
We typically schedule consultations within 48 hours. Our route from Enfield Town Hall via US-301 allows a 15-20 minute response to most downtown properties. After the site assessment and utility locate, mobilization with a crew at the $32/hr average labor rate usually occurs within 7-10 business days.
Do I need a special gate for my pool?
Yes. NC Residential Code Section 3109 requires pool barriers to have self-closing, self-latching gates. While smart-gate IoT integration is a low trend here, any electronic latch system must fail-safe to the closed and latched position to meet 2026 liability standards for child safety around pools.
What preparation is required before digging fence post holes?
You must contact North Carolina 811 at least three full business days before digging. Hitting a buried utility line in Downtown Enfield carries major liability for repair costs and service disruption. Our crew manages the 811 ticket and coordinates any required permits with the Enfield permit office.
What fence materials work best in Enfield's soil?
Given the Very Heavy termite risk and Moderate soil corrosivity, pressure-treated Southern Yellow Pine or composite materials are advised. Use hot-dipped galvanized or stainless-steel fasteners. Standard steel hardware will corrode, causing unsightly rust streaks on the fence within two years.
