Top Fencing Companies in Franklinton, NC, 27525 | Compare & Call
There are 74 fencing companies server in Franklinton NC
Franco Fencing N Concrete LLC has served Pink Hill, NC, for over a decade, specializing in fence and gate services for residential, commercial, and industrial clients. Our team handles installation, r...
Carolina Gator Fence, based in Carolina Beach, NC, is a local fencing and gate contractor serving homeowners along the Cape Fear coast. Common issues in this area include wooden fence rot from salt ai...
Atlantic Coast Landscaping and Hydroseed
Atlantic Coast Landscaping and Hydroseed serves Wilmington, NC, providing expert landscaping, landscape design, and fence and gate services. A frequent local issue is the combination of salty coastal ...
Morris Garden
Morris Garden, owned by Reaves, is a Wilmington-based company specializing in outdoor spaces. With a passion for building and the outdoors, Reaves founded the company to help homeowners design and con...
Bayview Fence & Railings has been serving Supply, NC, and Eastern Brunswick County for over 35 years, specializing in fences, gates, decks, and railings. As an established company, we offer a wide ran...
Awesome Works is a trusted general contractor serving Wilmington, NC, specializing in fence and gate services. Whether you need a new fence installed, an old one repaired, or your gate weatherproofed,...
Leaf Be Gone serves homeowners in Wilmington, NC, with hands-on outdoor services performed by a team that values hard work and attention to detail. We use advanced industrial vacuum equipment for gutt...
D&C Fence, based in Wilmington, NC, has been manufacturing and installing fences and gates for over 30 years. Established in 1993, we serve residential, agricultural, and commercial clients throughout...
Whittlin' Rooster Carpentry and Woodworking
Whittlin' Rooster Carpentry and Woodworking is a family-owned and operated general contracting business serving Wilmington and the surrounding areas. Founded on strong family values, the company treat...
Seahawk Contracting is a Wilmington, NC-based residential construction company that specializes in renovations, decks, fences, pergolas, and siding. As a third-generation contractor, our owner is a de...
Estimated Fencing Costs in Franklinton, NC
Common Questions
What are the fence height rules for my property in Franklinton?
Zoning code enforces a 4-foot maximum in front yards and 6 feet in rear yards. The regulation has a 0-foot setback, so you can build directly on your property line. For corner lots, maintain a clear 'sight triangle' at intersections; no solid fencing within 15 feet of the curb near US-1 to ensure driver visibility and meet town safety standards.
Why do my fence posts need to be set so deep in Franklinton?
Frost heave. Franklinton has an 8-inch frost line. Soil freezes, expands, and lifts posts set above it, causing permanent misalignment and failure. IRC Section R403.1.4 requires footings to be below the frost line for stability. In Downtown Franklinton, posts not set to 12-18 inches deep will fail within two winters.
Am I legally required to talk to my neighbor before building a fence in North Carolina?
Yes, for a partition or boundary fence. NC General Statute 84-1, the state's Common Law fence statute, establishes shared responsibility. As of 2026, replacing an existing shared boundary in Franklinton requires a formal written notice to the adjoining property owner to establish cost-sharing and maintenance liability before work begins.
Can I have a smart gate if I have a pool?
Yes, with integration. NC Residential Building Code Appendix AG requires pool gates to be self-closing and self-latching. Modern IoT gate operators from the Franklinton Depot area now integrate these mechanical safety latches with smart access controls. This combination meets 2026 liability standards by providing both remote management and code-compliant child safety.
Will my fence survive the wind in Franklin County?
Only if engineered for the 105 MPH V-ult wind speed. This ultimate design wind speed from ASCE 7-22 standards dictates structural requirements. For a fence to survive peak storm season gusts, post spacing must be reduced to 6-8 feet on-center, and posts must use reinforced concrete footings with proper brackets. Standard 8-foot spacing will fail.
What is required before you dig the first post hole?
A cleared utility locate and a town permit. You must contact North Carolina 811 at least three business days before digging. Hitting a buried line in Downtown Franklinton is a major financial and safety liability. We manage the permit paperwork with the Franklinton permit office to ensure the project meets all 2026 stormwater permeability and zoning rules.
How soon can you start a fencing project in Downtown Franklinton?
We schedule consultations within one week. Our standard route from the Franklinton Depot uses US-1 for direct access, resulting in a 35-45 minute response time for an on-site assessment. We then provide a firm timeline based on material lead times and the approved permit from the town.
What is the best fence material for Franklinton's soil and pests?
Material compatibility is critical. The area has Moderate Soil corrosivity and a Very Heavy termite risk. Pressure-treated pine or composite materials resist insects. Use hot-dip galvanized or stainless steel fasteners to prevent rust streaks from corrosion. Avoid untreated wood in direct ground contact; it will decay and attract subterranean termites.
