Top Fencing Companies in Statesville, NC, 28166 | Compare & Call

There are 220 fencing companies server in Statesville NC

I-ROK Fence Company

I-ROK Fence Company

★★★★☆ 3.7 / 5 (3)
Zebulon NC 27597
Fences & Gates

I-ROK Fence Company has been serving Zebulon, NC, and the surrounding areas since 1985. We are a family-owned business that takes pride in custom-building fences to match each property’s needs. Our se...

Ringler Custom Carpentry

Ringler Custom Carpentry

★★★★★ 5.0 / 5 (1)
Willow Spring NC 27592
Handyman, Fences & Gates, Carpenters

Ringler Custom Carpentry, a family-owned business based in Willow Spring, NC, brings over a decade of hands-on experience to custom woodwork, home renovations, interior trim, and outdoor structures. W...

King's Fence Company

King's Fence Company

★☆☆☆☆ 1.0 / 5 (2)
Cary NC 27511
Fences & Gates

King's Fence Company has been serving Cary, NC, homeowners and businesses with fencing solutions that combine durability and local expertise. As a licensed contractor, they specialize in installing, r...

A&A Construction

A&A Construction

Harrells NC 28444
Decks & Railing, Fences & Gates, General Contractors

A&A Construction has been serving Harrells, NC, and the surrounding areas for years, specializing in decks, fences, gates, and general contracting. Many local homes face fencing issues caused by coast...

Ace Fence Builders

Ace Fence Builders

240 Cross st, Burlington NC 27514
Fences & Gates

Ace Fence Builders has been serving Alamance County and Chapel Hill since 1989. Founded by TJ, who started building fences at age 15, the business is built on honesty, trust, and word-of-mouth referra...

Mission Decks & Design

Mission Decks & Design

6020 Fauvette Ln, Holly Springs NC 27540
Fences & Gates, Patio Coverings, Decks & Railing

Mission Decks & Design, based in Holly Springs, NC, specializes in crafting outdoor living spaces that combine luxury with lasting durability. Our team focuses on deck construction, repair, and replac...

Zamora Home Remodeling

Zamora Home Remodeling

Clayton NC 27520
Decks & Railing, Fences & Gates, General Contractors

Zamora Home Remodeling is a Clayton, NC, family-run operation founded by two brothers. With one brother bringing decades of construction experience—from building homes and apartments to hardscaping an...

Carolina’s Fencing

Carolina’s Fencing

★☆☆☆☆ 1.0 / 5 (2)
Elm City NC 27822
Fences & Gates

Serving Elm City, NC, Carolina’s Fencing provides professional fence and gate services to homeowners and businesses. Local properties often face fencing issues due to seasonal weather shifts, includin...

Jose’s Lawn Care

Jose’s Lawn Care

Durham NC 27707
Fences & Gates, Lawn Services, Masonry/Concrete

Jose’s Lawn Care provides fencing, gate, and concrete services to homeowners in Durham, NC. We handle fence and gate installation, repair, painting, staining, and weatherproofing, as well as driveway,...

The Welding Machine

The Welding Machine

★★★★★ 5.0 / 5 (1)
Lillington NC 27546
Metal Fabricators, Trailer Repair, Fences & Gates

The Welding Machine in Lillington, NC, provides expert metal fabrication, trailer repair, and fence and gate services. The area's high humidity and frequent rain cause wooden fences to rot and metal g...



Estimated Fencing Costs in Statesville, NC

Emergency Fence/Gate RepairStorm / Security Response
$264 - $359
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$39 - $59
Standard Driveway Gate InstallEstimated Range
$954 - $1,279

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Statesville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

How deep should my fence posts be set in Downtown Statesville?

Posts must extend below the 12-inch frost line to prevent frost heave. The 2024 IRC requires footings to be a minimum of 12 inches below finished grade in Frost Depth Zone 12. Posts set in shallow concrete will lift and fail during winter freeze-thaw cycles common in this area.

What are the height and placement rules for a fence on my property?

Zoning limits are 4 feet in the front yard and 8 feet in the rear yard, with a 0-foot setback allowing installation directly on the property line. Corner lots must maintain a clear 'sight triangle' at intersections; fencing within 15 feet of the curb line near I-77 feeder roads is typically restricted to 3 feet for driver visibility.

Is a standard fence strong enough for Statesville's wind?

A design wind speed of 115 MPH V-ult per ASCE 7-22 governs. This rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A typical 6-foot privacy fence in an open area may need 4x4 posts set 6 feet on center, not 8 feet, to survive peak storm season gusts without panel failure.

Can I install a smart gate on a fence around a pool?

Yes, but the gate hardware must first comply with ISPSC 2021/ICC pool safety codes, requiring self-closing, self-latching mechanisms that engage from any position. After that, an integrated IoT latch system can be added. This dual-compliance is now a standard practice to meet both security trends and liability requirements for North Carolina homeowners.

What fence material is best for Statesville's soil and pest conditions?

Moderate soil corrosivity and a moderate to heavy termite risk dictate material selection. Pressure-treated Southern Yellow Pine with .60 retention is a standard for wood. For metal, use hot-dip galvanized or aluminum fasteners to prevent rust streaks. Historic district approvals often restrict options to wood or wrought iron.

What needs to happen before you dig the first post hole?

North Carolina 811 must be contacted to mark all public underground utilities. Hitting a gas or communication line in Downtown Statesville creates major liability and service disruptions. Concurrently, we submit the permit application to the City of Statesville Planning Department, which typically requires a site plan showing the fence location relative to structures and property lines.

How soon can you start a project in Downtown Statesville?

We dispatch a project manager for a site consultation within 24-48 hours of inquiry. The standard route from Statesville City Hall uses I-77 for efficient access, resulting in a 15-20 minute response time to most Downtown locations. The start date is set after utility locates are clear and the city permit is issued.

Am I legally required to notify my neighbor before building a fence in Statesville?

Yes. NC General Statute 160D-905, the 'Good Neighbor' Fence Law, requires written notice to adjoining landowners before replacing or building a shared partition fence. As of 2026, this notification must be provided at least 30 days prior to any work commencing on the property line.



Scroll to Top
CALL US NOW