Top Fencing Companies in Cambridge, NE, 69022 | Compare & Call

There are 18 fencing companies server in Cambridge NE

Perez Roofing

Perez Roofing

Lexington NE 68850
Roofing, Fences & Gates, Siding

Perez Roofing, located in Lexington, NE, specializes in roofing, siding, and fence services tailored to the local climate. With Nebraska’s harsh winters and strong winds, fences often suffer from warp...

ALC Concrete

ALC Concrete

Kearney NE 68845
Masonry/Concrete, Fences & Gates

ALC Concrete, based in Kearney, NE, brings over a decade of hands-on experience to residential and commercial masonry and fencing projects. Specializing in driveways, patios, walkways, retaining walls...

Crossroads Welding

Crossroads Welding

1290 35th Rd, Minden NE 68959
Fences & Gates, Garage Door Services

Since 1991, Crossroads Welding in Minden, Nebraska, has provided reliable metal fabrication and welding services. We craft custom metal products for agricultural and residential needs, including gates...

MB Exteriors

MB Exteriors

1406 N Jackson St, Lexington NE 68850
Roofing, Siding, Fences & Gates

MB Exteriors serves Lexington, NE, and the surrounding areas with expert roofing, siding, and fencing solutions. A common issue for local homeowners is wind-damaged fence panels, often caused by the a...

The Rusty Spur Hedge Post

The Rusty Spur Hedge Post

314 S Jefferson Ave, North Platte NE 69101
Fences & Gates

Since 2008, The Rusty Spur Hedge Post has been a family-operated business in North Platte, Nebraska, providing hedge posts for fencing. Hedge wood, known for its natural density, offers exceptional du...

Helping Hand

Helping Hand

1610 W 2nd, McCook NE 69001
Fences & Gates, Handyman, Decks & Railing

Helping Hand serves McCook, NE, and the surrounding areas, offering reliable solutions for fences, gates, decks, and general handyman needs. Local homeowners often face fence panels damaged by strong ...

Gabel Construction

Gabel Construction

402 S Buffalo Bill Ave, North Platte NE 69101
General Contractors, Siding, Fences & Gates

Gabel Construction, serving North Platte, NE, specializes in siding installation and repair, as well as fencing and gates. Many homes in the area, particularly near Cody Park and the North Platte Rive...

Lemmer Fencing LLC

Lemmer Fencing LLC

Lexington NE 68850
Fences & Gates

Lemmer Fencing LLC proudly serves Lexington, NE, and the surrounding areas. We understand that local homes face specific fencing challenges, including damage from strong winds common on the plains, pe...

« Previous PagePage 2 of 2Next »


Estimated Fencing Costs in Cambridge, NE

Emergency Fence/Gate RepairStorm / Security Response
$379 - $514
Wood Privacy Fence (Per LF)Estimated Range
$34 - $54
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $74
Chain Link Installation (Per LF)Estimated Range
$24 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$59 - $84
Standard Driveway Gate InstallEstimated Range
$1,369 - $1,834

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Cambridge. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

Am I legally required to notify my neighbor before building a fence on the property line?

Yes. Nebraska Revised Statute 34-101, the 'Good Neighbor Fence Law,' mandates written notice to adjoining landowners before replacing or building a shared boundary fence. In Cambridge, you must provide this notice and allow 30 days for a written response. This 2026 legal step prevents future disputes over cost-sharing and maintenance.

Do smart gates meet Nebraska pool safety codes?

Yes, when specified correctly. The International Swimming Pool and Spa Code (IRC Appendix AG) requires pool barriers with self-closing, self-latching gates. An integrated IoT smart gate with these mechanical features and remote monitoring meets the code. While the smart-gate trend is low here, this integration addresses modern liability standards by providing audit logs of access.

How soon can a crew start a fencing project in Cambridge?

A consultation is typically scheduled within 48 hours. Our route from the Medicine Creek State Recreation Area via US-6 takes 10-15 minutes to most Cambridge City Center properties. After the site assessment and utility locate, project start depends on material lead times and permit approval, often within 7-10 business days for standard installations.

How is a fence engineered to withstand high winds in Nebraska?

The 115 MPH V-ult wind speed rating dictates the structural design. This 'ultimate' wind load requires closer post spacing (often 6 feet on-center instead of 8 feet), deeper footings, and welded steel brackets at connections. These specifications, per ASCE 7-22 standards, ensure the fence can survive peak storm season gusts without panel failure or uplift.

How deep do fence footings need to be in Cambridge to prevent frost heave?

Footings for fence posts in Cambridge City Center must extend 42 inches deep to pass below the local frost line. The IRC requires this to prevent frost heave, which lifts posts and warps panels. In our moderate soil, a concrete collar around a 6x6 post provides the necessary stability against the 115 MPH V-ult wind load.

What are the height and setback rules for fences in Cambridge, NE?

Cambridge zoning limits fences to 4 feet in front yards and 6 feet in rear yards. A 0-foot setback is allowed, meaning you can build directly on the property line. For corner lots near US-6, you must maintain a clear 'sight triangle' at intersections—no obstructions over 3 feet high within 25 feet of the corner. This ensures visibility for traffic safety.

What are the critical steps before digging fence post holes?

First, call Nebraska 811 at least three business days before digging. They mark all public utility lines. Hitting a gas or fiber line in Cambridge City Center is a major liability with repair costs and fines. Concurrently, file for a permit with the Cambridge permit office. We manage this paperwork to ensure the installation complies with all local zoning and building codes.

Which fence materials hold up best against Cambridge soil and pests?

Material compatibility is critical given the moderate soil corrosivity index and moderate termite risk. Pressure-treated Southern Yellow Pine or cedar are standard for wood. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. For metal posts, a polyethylene sleeve in the ground contact zone mitigates corrosion. Avoid untreated lumber in direct soil contact.



Scroll to Top
CALL US NOW