Top Fencing Companies in Kensington, NH, 03833 | Compare & Call

There are 28 fencing companies server in Kensington NH

Shae Fence

Shae Fence

★★★☆☆ 3.0 / 5 (2)
Nashua NH 03060
Fences & Gates

Shae Fence, based in Nashua, NH, specializes in expert fence and gate services for both residential and commercial clients. Located near the bustling Daniel Webster Highway and just minutes from the h...

New Solutions

New Solutions

★★★★★ 5.0 / 5 (1)
Nashua NH 03060
General Contractors, Drywall Installation & Repair, Fences & Gates

New Solutions in Nashua, NH, offers drywall installation, repair, and wall finishing services for local homeowners and businesses. Our team brings years of hands-on experience in general contracting, ...

Penney Fence

Penney Fence

★★★★☆ 4.3 / 5 (6)
Londonderry NH 03053
Fences & Gates

The Penney family has been serving Londonderry, NH, and the surrounding area since 1965. As a family-owned fencing company, we take pride in every installation, repair, and weatherproofing project we ...

Storm Strong Fence

Storm Strong Fence

★★★★★ 5.0 / 5 (1)
Epping NH 03042
Fences & Gates

Storm Strong Fence, LLC in Epping, NH, brings 15 years of fencing experience to residential and commercial clients across the area. We specialize in fence and gate installation, repair, painting, stai...

Affordable Fence

Affordable Fence

Allenstown NH 03275
Fences & Gates

Affordable Fence in Allenstown, NH, provides expert fence and gate services to homeowners and businesses. Serving the Allenstown area near Bear Brook State Park, they address common local fencing issu...

East Coast Rent-A-Fence

East Coast Rent-A-Fence

Gilmanton NH 03237
Fences & Gates

East Coast Rent-A-Fence, a family-owned and operated business in Gilmanton, NH, has provided temporary and permanent fencing solutions for over 30 years. Serving New Hampshire, Maine, Massachusetts, a...

k N D Fencing

k N D Fencing

North Hampton NH 03862
Fences & Gates

k N D Fencing serves North Hampton, NH, and the surrounding Seacoast area, providing expert fence and gate services. Local homeowners often face issues like storm damage, rot from coastal moisture, an...

Brentwood Fence

Brentwood Fence

★★★☆☆ 3.0 / 5 (12)
300 New Hampshire 125, Brentwood NH 03833
Fences & Gates

Brentwood Fence has been serving Brentwood, NH, since 2004, providing fully insured residential and commercial fencing solutions. We specialize in vinyl, aluminum, chain link, wood, and glass fencing,...

Great Pond Fence

Great Pond Fence

★★★★★ 5.0 / 5 (2)
Kingston NH 03848
Fences & Gates

Great Pond Fence is a trusted provider of fence and gate services in Kingston, New Hampshire, serving residential and commercial properties near Great Pond, Kingston Lake, and the historic Kingston St...

Fences By Stoneridge

Fences By Stoneridge

Plaistow NH 03865
Fences & Gates

Fences By Stoneridge, owned by Fred, has been a trusted fence company in the Plaistow, NH area for years. Specializing in wood, vinyl, aluminum, and chain link fencing, we offer comprehensive installa...



Estimated Fencing Costs in Kensington, NH

Emergency Fence/Gate RepairStorm / Security Response
$344 - $464
Wood Privacy Fence (Per LF)Estimated Range
$29 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $74
Standard Driveway Gate InstallEstimated Range
$1,234 - $1,654

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Kensington. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

How soon can a consultation be scheduled?

Initial consultations are typically scheduled within 5-7 business days. Our route from the Kensington Town Hall landmark uses NH-108, resulting in a standard 35-45 minute travel time for an on-site assessment in the Kensington Center neighborhood.

How is my fence designed for high winds?

Design is based on a 115 MPH V-ult wind speed. This engineering rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A fence not engineered to ASCE 7-22 standards for this load will likely fail during the peak storm season.

How deep should fence posts be set in Kensington?

Posts require a 48-inch footing depth to reach below the frost line. In the Kensington Center neighborhood, shallow posts will be lifted by frost heave, causing structural failure. The 2021 IRC R403.1.4 mandates footings below the local frost depth to prevent this movement.

What are the height and placement rules for a fence in Kensington?

Kensington zoning limits fences to 4 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation directly on the property line. For corner lots near NH-108, you must maintain a clear 'sight triangle' at intersections; fencing this area is prohibited for driver visibility.

Can I install a smart gate with a pool?

Yes, but integration is critical. The gate hardware must be a self-closing, self-latching system meeting IRC Appendix AG pool safety code. A smart IoT latch can provide access logs and remote control, which helps demonstrate compliance with modern liability standards for New Hampshire homeowners.

What is required before digging post holes?

You must contact Dig Safe 811 at least three business days before excavation. Hitting a buried utility line in Kensington Center is a major liability for repair costs and service disruption. A professional installer manages this call and pulls any required permit from the Kensington Town Hall permit office.

Do I need to tell my neighbor before installing a fence on the property line?

Yes. NH RSA 476:1, the 'Good Neighbor Law,' requires written notification to adjoining landowners when replacing a partition fence on a shared boundary in Kensington. Failure to provide this notice can result in liability for the full construction cost.

What fence materials work best with Kensington's soil?

Kensington has moderate soil corrosivity and termite risk. Use pressure-treated wood rated for ground contact or corrosion-resistant metals like aluminum. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks that stain materials and violate historic district aesthetic guidelines.



Scroll to Top
CALL US NOW