Top Fencing Companies in Collingswood, NJ, 08107 | Compare & Call

There are 92 fencing companies server in Collingswood NJ

FRA Landscaping Construction

FRA Landscaping Construction

Somerset NJ 08873
Landscaping, Fences & Gates, Masonry/Concrete

F.R.A Landscaping Construction, based in Somerset, NJ, specializes in transforming outdoor spaces through professional landscaping, fencing, masonry, and concrete services. As a full-service company, ...

Garden Fence

Garden Fence

Roselle NJ 07203
Fences & Gates

Garden Fence in Roselle, NJ, is a family-owned fencing contractor with over 15 years of experience serving both residential and commercial clients. Specializing in fence and gate installation and repa...

« Previous PagePage 10 of 10Next »


Estimated Fencing Costs in Collingswood, NJ

Emergency Fence/Gate RepairStorm / Security Response
$369 - $499
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$49 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,324 - $1,774

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Collingswood. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Frequently Asked Questions

Why do fence posts in Collingswood require deep concrete footings?

Frost heave is a primary failure mode here. The IRC mandates footings extend below the local 30-inch frost line. Posts set in shallow concrete will lift during freeze-thaw cycles, compromising the fence's structural integrity. In the Collingswood Historic District, this is a common repair issue we address.

What are my legal obligations to my neighbor when replacing a boundary fence?

New Jersey's Good Neighbor Law (N.J. Rev. Stat. ยง 40:48-1.2) requires written notice to adjacent property owners before altering a shared partition fence. Since 2026, this notification must be documented. Failure to comply can result in disputes and financial liability for the full cost of the fence under local interpretation of the statute.

What are the height and placement rules for a fence on my property?

Collingswood zoning permits a 4-foot maximum height in front yards and 6 feet in rear yards, with a 0-foot setback allowed on side and rear property lines. Critical visibility 'sight triangles' at corner lots must be maintained, especially for properties near US Route 130, where clear lines of sight are a safety imperative enforced by the borough.

How do you engineer a fence to withstand our high wind loads?

The design wind speed for Collingswood is 115 mph (V-ult). This rating, per ASCE 7-22 standards, dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A fence not engineered for this load will likely fail during peak storm season gusts, leading to projectile hazards and property damage.

What is required before you can start digging fence post holes?

State law requires a utility locate request through New Jersey 811 at least three business days before excavation. Striking an unmarked line in the Collingswood Historic District carries severe civil and criminal liability. We manage this process and coordinate all required borough permit office paperwork to ensure a compliant start.

How soon can your crew start a project in the Collingswood Historic District?

After a signed agreement and utility clearances, we typically mobilize within 10-14 business days. Our standard dispatch route from our yard near Knight Park uses US Route 130, allowing for a consistent 25-35 minute response window for consultation and site supervision within the borough.

What fencing materials perform best given Collingswood's soil and pest conditions?

Material compatibility is key. The moderate soil corrosivity index requires G90 galvanized steel fasteners and hardware to prevent rust streaks. Given the moderate termite risk, pressure-treated wood posts must be rated for ground contact, or consider using composite or aluminum materials which are inherently resistant to decay and insect damage.

Can a smart gate system meet modern pool safety codes?

Yes. An integrated IoT gate latch with self-closing and self-latching mechanisms, monitored via smartphone, can comply with both the 2021 International Swimming Pool and Spa Code (ISPSC) and modern liability standards. This system provides a verifiable audit trail of access, which is becoming a best practice for New Jersey homeowners with pools.



Scroll to Top
CALL US NOW