Top Fencing Companies in Moapa Valley, NV, 89021 | Compare & Call
There are 90 fencing companies server in Moapa Valley NV
Superior Fencing in North Las Vegas, NV, has been providing reliable fence and gate services since 2021. While the company is relatively new, their expert estimator brings over 20 years of hands-on ex...
Founded in 2007 by Matthew, a UNLV graduate and lifelong Las Vegas resident, Western Door and Gate, LLC is a locally owned business serving Nevada, Arizona, and Utah. Matthew started the company to ad...
AR Iron, a family-owned and operated ironworks company in Henderson, NV, has been serving the Las Vegas Valley for over 35 years. Founded by Fred and Sylvia Sclafani in 1989, the business is now run b...
DNG Automatic Gates
DNG Automatic Gates LLC, based in Las Vegas, has been installing and servicing gates and fencing since 2012. Owner David brings 20 years of industry experience, serving homeowners and businesses acros...
East Ridge Landscaping, based in Las Vegas, NV, provides expert landscaping, fencing, and masonry services to homeowners and businesses. With years of experience, they tackle common local fencing issu...
Fencing Fabrication LLC is a woman-owned, Clark County–approved Commercial metal fabrication shop serving North Las Vegas, NV. We deliver precise, code-compliant work in iron fabrication, metal railin...
LV Iron & Steel
LV Iron & Steel is a licensed structural and miscellaneous steel fabricator serving Las Vegas, North Las Vegas, and Henderson. With over 21 years of experience, we specialize in custom metal fabricati...
Ornamental Steel Fabricators
Ornamental Steel Fabricators is a Las Vegas, NV-based company specializing in custom metal fabrication, fencing, and gates. Operating near the Las Vegas Strip and the Arts District, we address the com...
California Steel & Ornamental Supply
California Steel & Ornamental Supply has served the Las Vegas Valley since 1999, when founder Efrain Hernandez relocated from his original 1998 backyard startup in Compton, California. After over a de...
L & M Welding
L & M Welding in Mesquite, NV, was founded by friends who recognized a need for reliable metal fabrication and fencing services along Interstate 15 and throughout the local community. Their philosophy...
Estimated Fencing Costs in Moapa Valley, NV
FAQs
What needs to happen before you dig?
You must contact Arizona 811 (serving Clark County) at least two full business days before excavation. They mark public utility lines for free. Hitting an unmarked line in Overton is a major liability and can disrupt service to the neighborhood. We manage all necessary permit paperwork with the Moapa Valley Building Department to ensure the project is documented and inspected.
Can I have a smart gate for my pool?
Yes, but the primary mechanism must comply with the 2026 IRC Appendix AG pool barrier code. Gates require self-closing and self-latching hardware with a latch release at least 54 inches high. IoT-enabled smart latches can be integrated as a secondary feature, but the core system must meet these physical safety standards to limit liability for Nevada homeowners.
What is your typical timeline for a consultation?
We schedule site consultations within 3-5 business days. Our standard route from the Moapa Valley High School area uses NV-169, with travel times to most Overton properties averaging 45-60 minutes. The consultation includes a zoning review, wind load assessment, and a detailed quote based on the current labor rate of approximately $45 per hour.
How deep should fence posts be in Moapa Valley?
Posts in Overton must be set a minimum of 12 inches below grade, below the local frost line. IRC Section R403.1.4 requires this depth to prevent frost heave, which can shift posts and collapse panels. For a 6-foot fence, we recommend a 30-inch deep hole with a concrete collar for stability against the 115 MPH V-ult wind loads common here.
Do I need to tell my neighbor about a new fence?
Yes. Nevada's 'Good Neighbor Fence Law' (NRS 206.150) requires written notice to adjoining property owners before building or replacing a shared partition fence on the property line. As of 2026, this notification is a prerequisite for any cost-sharing agreements and helps avoid disputes in Moapa Valley.
What fence materials work best here?
Moapa Valley's moderate soil corrosivity index and termite risk demand specific materials. Use pressure-treated lumber rated for ground contact or naturally resistant woods like cedar. All metal fasteners and hardware must be G90 galvanized or stainless steel to prevent rust streaks. Vinyl is a low-maintenance alternative but requires UV stabilization for the desert climate.
What are the height and placement rules for fences?
Moapa Valley zoning sets a 3-foot height limit for front yards and 6 feet for rear/side yards. A 0-foot setback allows building directly on the property line. Corner lots near NV-169 require special attention to 'sight triangles'—low-profile fencing within 25 feet of the intersection to maintain driver visibility and comply with Clark County safety codes.
How do you build a fence for high winds?
The 115 MPH V-ult wind speed rating for Overton dictates structural design. This requires closer post spacing (often 6 feet on-center), deeper concrete footings, and wind-rated brackets or through-bolt connections. Panels must be securely fastened to rails using corrosion-resistant hardware. This engineering meets ASCE 7-22 standards to survive peak storm season gusts off the valley.