Top Fencing Companies in Brentwood, NY, 11717 | Compare & Call

There are 138 fencing companies server in Brentwood NY

Red Fox Fence

Red Fox Fence

★★☆☆☆ 2.0 / 5 (1)
620 Armonk Rd, Mt. Kisco NY 10549
Fences & Gates

Red Fox Fence has been serving Mt. Kisco and the surrounding Westchester County area since 2006. We specialize in the installation, repair, and maintenance of a wide range of fencing products, includi...

B & Sons Fences

B & Sons Fences

180 Warren Ave, North White Plains NY 10603
Fences & Gates

B & Sons Fences has been the trusted fencing contractor for North White Plains and the greater Westchester area for years. We specialize in both residential and commercial fence and gate services, fro...

Nick’s Fence

Nick’s Fence

★★★★★ 5.0 / 5 (1)
71 Charter Cir, Ossining NY 10562
Fences & Gates

Nick’s Fence has been serving Ossining, NY, for years, specializing in fences and gates. Many local homes face wind-damaged fence sections and staining deterioration due to the area’s weather. Nick’s ...

Garage Doors Greenburgh

Garage Doors Greenburgh

White Plains NY 10533
Garage Door Services, Fences & Gates

Garage Doors Greenburgh, based in White Plains, NY, is a licensed and bonded provider of garage door services for both residential and commercial properties. We specialize in the repair and installati...

ECO World Construction

ECO World Construction

4 McKinley Ave, Valhalla NY 10595
Waterproofing, Fences & Gates, Decks & Railing

ECO World Construction, based in Valhalla, NY, provides waterproofing, fence and gate, and deck and railing services to homeowners throughout Westchester County. The company offers comprehensive deck ...

All Pro Built

All Pro Built

★★★★★ 5.0 / 5 (1)
stormville NY 12582
Fences & Gates, General Contractors, Decks & Railing

All Pro Built in Stormville, NY, is a trusted general contractor specializing in fences & gates, decks & railings, and comprehensive remodeling services. They address the common local issue of fence p...

Westchester Fences & Iron Works

Westchester Fences & Iron Works

★☆☆☆☆ 1.0 / 5 (2)
259 S Regent St, Port Chester NY 10573
Fences & Gates

Westchester Fences & Iron Works, located in Port Chester, NY, specializes in fence and gate installation, repair, painting, staining, weatherproofing, and automatic gate systems. Serving the local com...

Giacorp Contracting

Giacorp Contracting

11 Bradhurst Ave, Hawthorne NY 10532
Fences & Gates, Decks & Railing, Masonry/Concrete

Giacorp Contracting, based in Hawthorne, NY, brings over 30 years of combined experience in the fence and site-work industry. We specialize in fences and gates, decks and railing, and masonry and conc...

4 Stars & Brothers Fence

4 Stars & Brothers Fence

10 Yellowstone Ave, White Plains NY 10607
Fences & Gates

4 Stars & Brothers Fence serves White Plains, NY, addressing common fencing problems like corroded hardware and leaning fences. Located near the bustling downtown and The Westchester mall, this family...

Ergeon

Ergeon

75 S Broadway Fl 4, White Plains NY 10601
Fences & Gates

Ergeon is a service-oriented outdoor construction company serving White Plains, NY, with a focus on fence and gate installation. We combine technology and skilled labor to deliver transparent, hassle-...



Estimated Fencing Costs in Brentwood, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Brentwood. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

Is a standard fence strong enough for Long Island's wind?

Not without engineering. Brentwood's 120 MPH V-ult wind load rating dictates specific post spacing, concrete footing size, and bracket strength. A fence not designed to ASCE 7-22 standards for this wind speed will likely fail during peak storm season gusts, especially in exposed areas near Brentwood State Park.

Am I legally required to tell my neighbor I'm replacing our shared fence?

Yes. New York State Property Law Section 531, the 'good neighbor' law, mandates written notification to adjoining owners for work on a shared 'partition' fence. In Brentwood, providing this notice before 2026 is a strict legal prerequisite to avoid disputes and potential cost-sharing complications.

What is required before digging fence post holes?

You must contact New York 811 for a utility locate at least two full business days before excavation. Hitting a gas, electric, or fiber line in Brentwood Central is a major liability causing service outages and repair costs. A professional manages this ticket and all associated Town of Islip permit office paperwork.

Why must fence posts in Brentwood be set so deep?

The 30-inch frost line depth in Brentwood Central is a critical structural requirement. Footings and posts not set below this line are subject to frost heave, which will lift and crack the fence. Following IRC standards for this depth prevents the cyclical failure common in our neighborhood after winter thaws.

How soon can a crew start a fence project in Brentwood?

Consultations are typically scheduled within a week. Our route from Brentwood State Park via the I-495 ensures a 35-45 minute response for site assessments in your neighborhood. Project start dates are confirmed after utility locates are clear and the Town issues the required permit.

What are the fence height and placement rules for my Brentwood property?

Town of Islip code enforces a 4-foot height limit in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, maintaining clear 'sight triangles' at intersections is non-negotiable, especially near high-traffic corridors like I-495, to ensure driver visibility.

What is the best fencing material for Brentwood's soil and pest conditions?

Material compatibility is essential. With moderate soil corrosivity, aluminum or steel must be hot-dipped galvanized or powder-coated. Given the moderate termite risk, avoid wood posts in direct ground contact. Using stainless steel fasteners prevents rust streaks that degrade appearance and structural integrity.

Can a smart gate system meet New York's pool fence code?

Yes, but integration is key. The NYS building code requires a pool barrier of 48 to 60 inches with a self-closing, self-latching gate. Modern IoT access systems can integrate certified latches that log every entry, meeting both the 2026 trend for cellular control and the strict liability standards for New York homeowners.



Scroll to Top
CALL US NOW