Top Fencing Companies in Fenner, NY, 13032 | Compare & Call

There are 156 fencing companies server in Fenner NY

Campanella Fence

Campanella Fence

★★★★☆ 4.4 / 5 (27)
289 Route 6, Mahopac NY 10541
Fences & Gates, Decks & Railing

Established in 1987, Campanella Fence has been a trusted fence and deck company serving Mahopac, NY, and the surrounding counties of Westchester, Putnam, Dutchess, Fairfield, and Rockland. Located in ...

Glass Fencing Systems Nyc

Glass Fencing Systems Nyc

199 Avenue T, Brooklyn NY 11223
Glass & Mirrors, Fences & Gates

Glass Fencing Systems Nyc specializes in frameless and semi-frameless glass pool fences, railings, and gates for residential and commercial properties across Brooklyn, NY. Serving neighborhoods like W...

Five Boroughs Iron Work

Five Boroughs Iron Work

Brooklyn NY 11218
Metal Fabricators, Fences & Gates

Five Boroughs Iron Work is a trusted metal fabrication and fence company serving Brooklyn, NY. We specialize in installing and repairing fences and gates—both manual and automatic. Many Brooklyn homes...

Liberty Fence & Railing

Liberty Fence & Railing

★★★☆☆ 2.6 / 5 (117)
775 Meacham Ave, Elmont NY 11003
Fences & Gates, Decks & Railing

Liberty Fence & Railing, based in Elmont, NY, has been fabricating and installing fences, gates, and railings for 47 years. As a licensed and insured contractor, we specialize in 100% pure virgin viny...

Paul Iron Works

Paul Iron Works

★★☆☆☆ 2.0 / 5 (4)
Queens NY 11373
Metal Fabricators, Fences & Gates, Awnings

Paul Iron Works, based in Queens, NY, is a licensed and insured metal fabricator with over 15 years of experience specializing in custom metal fabrication for gates, railings, fences, spiral staircase...

ARB Fence Corp

ARB Fence Corp

★★★★★ 5.0 / 5 (13)
1032 Cleveland St, Uniondale NY 11553
Fences & Gates, Decks & Railing

Based in Uniondale, NY, ARB Fence Corp has been serving homeowners and businesses since 2013. As a licensed and insured contractor, we specialize in fence and gate installation, repair, and maintenanc...

Benny Ironworks

Benny Ironworks

★★☆☆☆ 1.5 / 5 (13)
Jamaica NY 11432
Metal Fabricators, Fences & Gates, Decks & Railing

Benny Ironworks is a locally owned metal fabrication company serving Jamaica, NY, with over ten years of experience. We specialize in custom metal fabrication, deck construction, repair, and replaceme...

Above All Fence

Above All Fence

★★★★☆ 4.0 / 5 (10)
3310 Sunrise Hwy, East Islip NY 11730
Fences & Gates

Above All Fence has served East Islip and the surrounding communities since 1985 as a licensed fencing contractor. Located near the intersection of Montauk Highway and Carleton Avenue, our showroom pr...

Family Fence

Family Fence

★★★★☆ 4.0 / 5 (53)
2207 Newbridge Rd, Bellmore NY 11710
Fences & Gates, Decks & Railing, Awnings

Family Fence has been a trusted name in Bellmore and the surrounding Nassau County area since 1989. Founded by Carl, who previously ran a power washing and fence repair business, the company grew out ...

Tj & Son Finest Welding Iron Work

Tj & Son Finest Welding Iron Work

Bronx NY 10466
Metal Fabricators, Fences & Gates

Tj & Son Finest Welding Iron Work has been a trusted metal fabrication and fence company in Bronx, NY since 2011. Founded by T.C., a welder known for his skill in bending steel into intricate patterns...



Estimated Fencing Costs in Fenner, NY

Emergency Fence/Gate RepairStorm / Security Response
$299 - $404
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,074 - $1,439

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Fenner. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

How does the local wind rating affect fence construction?

A 115 MPH V-ult wind speed rating dictates the engineering. This ultimate design wind speed, per ASCE 7-22 standards, requires specific post spacing, concrete footing mass, and bracket strength. Fences in open areas near Fenner Town Center must be designed to survive peak storm season gusts without creating projectile hazards.

What are the fence height and placement rules for a corner lot near US-20?

Fenner zoning enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards, with a 0-foot setback allowing installation directly on the property line. For corner lots, a 'sight triangle' at the intersection must remain clear for driver visibility. Fences near US-20 cannot obstruct this triangle, which is a critical safety requirement enforced by the local code office.

What is the typical timeline for a consultation and project start?

We schedule site consultations based on route efficiency. A standard dispatch from Fenner Town Hall proceeds via US-20, resulting in a 35-45 minute travel time to most locations in the service area. Following the consultation, project start depends on material lead times and the 811 marking completion, typically within 10-14 business days in the current 2026 market.

Why do fence posts in Fenner Town Center need such deep footings?

The 48-inch frost line depth is critical for structural stability. Frost heave will lift posts set above this line, causing failure. Per IRC R403.1.4, footings must extend below the frost line. In the Fenner area, posts not set to this depth will shift during winter, leading to permanent racking and gate misalignment.

What is the utility locate process before digging in Fenner?

You must contact New York 811 at least two full business days before excavation. They mark public utility lines. Hitting an unmarked line in Fenner Town Center is a major liability involving repair costs and fines. As the contractor, we manage the 811 ticket and coordinate any additional permit office paperwork required by the town for the installation.

How do modern pool gates meet New York safety and technology standards?

The NYS Uniform Fire Prevention and Building Code mandates self-closing, self-latching gates for pools. While smart-gate IoT integration has low adoption here, any automated system must integrate a primary mechanical latch that meets this code. This dual-layer approach satisfies both modern liability standards and the fundamental 2026 safety requirement for a fail-secure closure.

What are the legal steps for replacing a shared fence in Fenner?

New York Real Property Actions and Proceedings Law Section 843 governs partition fences. As of 2026, you must provide written notice to any neighbor sharing the boundary line before any replacement work begins. This 'good neighbor' law establishes shared maintenance responsibility and prevents disputes in rural zoning oversight areas like Fenner.

What fencing materials are best for Fenner's soil and pest conditions?

Material compatibility is key. With moderate soil corrosivity, hot-dip galvanized steel posts are recommended. For wood, use pressure-treated lumber rated for ground contact due to slight to moderate termite risk. Always use stainless steel or coated fasteners to prevent rust streaks that degrade appearance and accelerate corrosion.



Scroll to Top
CALL US NOW