Top Fencing Companies in Fleming, NY, 13021 | Compare & Call

There are 173 fencing companies server in Fleming NY

Uncle Marino's Home Improvement

Uncle Marino's Home Improvement

Elmont NY 11003
Painters, Fences & Gates, Pool & Hot Tub Service

Uncle Marino's Home Improvement, owned by Marino Reyes, is a home services company based in Elmont, NY, specializing in painting, fencing, and pool services. The business was born from a personal chal...

Garage Doors Gates Queens

Garage Doors Gates Queens

Queens NY 10314
Garage Door Services, Fences & Gates

For over 16 years, Garage Doors Gates Queens has provided reliable garage door and gate services to residential and commercial clients across Queens, NY. Our trained technicians operate fully stocked ...

Southside Fence, Railings & Sheds, Inc

Southside Fence, Railings & Sheds, Inc

★★★★☆ 3.5 / 5 (13)
1190 Sunrise Hwy, Copiague NY 11726
Fences & Gates, Sheds & Outdoor Storage

Southside Fence, Railings & Sheds, Inc. is a family-owned and operated business serving Copiague and the greater Long Island area. We specialize in the installation, repair, and maintenance of fences,...

WR Fence

WR Fence

★★★★★ 5.0 / 5 (7)
2484 Middle Country Rd, Centereach NY 11720
Fences & Gates, Masonry/Concrete

WR Fence has been serving Centereach and the surrounding areas since 2002, bringing over 15 years of hands-on experience to every job. We specialize in a wide range of fencing solutions, including alu...

Falcon Construction

Falcon Construction

Huntington Station NY 11746
Decks & Railing, General Contractors, Fences & Gates

Falcon Construction has been serving Huntington Station homeowners for eight years, specializing in bathroom remodeling, deck construction, and fence installations. We understand the unique challenges...

Iron Works 777

Iron Works 777

47 Ash St, Yonkers NY 10701
Metal Fabricators, Fences & Gates, Decks & Railing

Iron Works 777 is a family-owned metal fabrication and contracting business serving Yonkers, NY. Specializing in custom fences, gates, decks, and railings, the company addresses common local challenge...

Hoferbuilt

Hoferbuilt

Selden NY 11784
Metal Fabricators, Fences & Gates

Hoferbuilt is a trusted metal fabricator and fence contractor serving Selden, NY, and the surrounding area. Located just off Middle Country Road near the Selden Fire Department, the team understands t...

Anderson’s Mechanical Door Services

Anderson’s Mechanical Door Services

Queens NY 11369
Garage Door Services, Fences & Gates

Anderson’s Mechanical Door Services, based in Queens, NY, has been providing expert garage door and gate installation and repair since 2001. As a respectful and friendly technician, I guide customers ...

B & A Tree service Masonry Fence & more

B & A Tree service Masonry Fence & more

★★★★★ 5.0 / 5 (2)
Deer Park NY 11729
Tree Services, Fences & Gates, Masonry/Concrete

B & A Tree service Masonry Fence & more has been serving Deer Park, NY, and surrounding areas for over five years. We specialize in tree services, masonry, and fence and gate installation. Our team of...

New York Fence Pro

New York Fence Pro

3 Taurgo Ln, Centereach NY 11720
Fences & Gates, Decks & Railing

New York Fence Pro, founded in 2023, is a residential fencing company based in Centereach, NY, dedicated to providing durable and attractive fencing solutions for Long Island homeowners. We specialize...



Estimated Fencing Costs in Fleming, NY

Emergency Fence/Gate RepairStorm / Security Response
$299 - $404
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,074 - $1,439

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Fleming. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What is the utility locate process before digging in Fleming Center?

You must call 811 Dig Safely New York at least 2 full business days before excavation. They mark all public underground lines. Hitting an unmarked utility line in Fleming Center carries major financial liability and service disruption penalties. We manage the full process, including pulling any required permits from the Town of Fleming permit office, to ensure the project is fully cleared and documented.

How does the 115 MPH V-ult wind rating affect my fence design?

The 115 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This engineering metric dictates the structural requirements. In practice, it mandates closer post spacing (often 6 feet on-center, not 8), deeper concrete footings, and the use of certified wind-rated brackets. A fence not engineered for this V-ult will likely fail during our peak storm season gusts.

Can I have a smart gate with a pool in New York State?

Yes, but integration is key. The New York State Uniform Code requires pool barriers to have self-closing, self-latching gates. A smart gate system must integrate a certified mechanical latch that meets this code, regardless of IoT functionality. We specify latches with a secondary power-fail secure mode. This meets both modern convenience and 2026 liability standards.

Do I need to notify my neighbor before building a fence in Fleming, NY?

Yes. New York Town Law Section 300, the 'Good Neighbor' law, requires written notice to adjoining property owners for any fence on a shared boundary line. As of 2026, this is a strict requirement in Fleming. Failure to provide notice can result in a civil action and an order to remove the structure. Serve notice before any work begins.

What are the height and setback rules for a fence in Fleming?

Fleming zoning limits are 4 feet in the front yard and 6 feet in the rear, with a 0-foot setback, meaning you can build on the property line. Critical exception: corner lots must maintain a clear 'sight triangle' for traffic visibility. This is strictly enforced on lots adjacent to NY-38. Any fence obstructing driver sightlines at intersections will be cited for removal.

Why is a 42-inch footing depth required for my fence in Fleming Center?

The 42-inch frost line depth is mandated by the IRC for Fleming. Posts set above this depth are subject to frost heave, where freeze-thaw cycles lift the footing. This is the primary cause of post failure, racking, and gate misalignment in our neighborhood. Your posts must be set below this line with concrete to ensure long-term stability.

How soon can a consultation be scheduled?

We typically schedule site consultations within 3-5 business days. Our standard route for Fleming Center dispatches from the Fleming Town Hall, proceeding via NY-38. This provides a consistent travel time of 25-35 minutes for an on-site evaluation of your property lines, terrain, and project scope.

What fence materials work best with Fleming's moderate soil and termite risk?

Material compatibility is critical. Our moderate soil corrosivity index requires hot-dipped galvanized steel posts and fasteners to prevent rust streaks. For wood components, use pressure-treated lumber rated for ground contact. Given the moderate termite risk, avoid untreated wood in direct soil contact. Composite or vinyl panels are low-maintenance alternatives that resist both corrosion and pests.



Scroll to Top
CALL US NOW