Top Fencing Companies in Gang Mills, NY, 14870 | Compare & Call

There are 146 fencing companies server in Gang Mills NY

Paul Iron Works

Paul Iron Works

★★☆☆☆ 2.0 / 5 (4)
Queens NY 11373
Metal Fabricators, Fences & Gates, Awnings

Paul Iron Works, based in Queens, NY, is a licensed and insured metal fabricator with over 15 years of experience specializing in custom metal fabrication for gates, railings, fences, spiral staircase...

Benny Ironworks

Benny Ironworks

★★☆☆☆ 1.5 / 5 (13)
Jamaica NY 11432
Metal Fabricators, Fences & Gates, Decks & Railing

Benny Ironworks is a locally owned metal fabrication company serving Jamaica, NY, with over ten years of experience. We specialize in custom metal fabrication, deck construction, repair, and replaceme...

Amendola's Fence

Amendola's Fence

★★★☆☆ 3.1 / 5 (65)
1084 Sunrise Hwy, Amityville NY 11701
Fences & Gates

Since 1961, Amendola's Fence in Amityville, NY has been a family-owned manufacturer and installer serving Long Island. We specialize in aluminum, wood, PVC, and chain link fences for both residential ...

Numat Fence

Numat Fence

★★★★☆ 4.0 / 5 (8)
346 Ashford Ave, Dobbs Ferry NY 10522
Fences & Gates

Numat Fence, a family-owned business in Dobbs Ferry, NY, has served the local community for over 40 years, offering a full line of residential, commercial, and industrial fencing. We specialize in fen...

Kamberi Home And Garden Care

Kamberi Home And Garden Care

★★★★☆ 4.2 / 5 (5)
1836 Colden Ave, Bronx NY 10462
Fences & Gates, Decks & Railing

Kamberi Home And Garden Care, located in the Bronx, NY, is a licensed and insured fence and deck specialist dedicated to increasing the value and beauty of homes through elegant outdoor living spaces....

Fesco Fence

Fesco Fence

★★★☆☆ 3.2 / 5 (26)
237 South Rte 303, West Nyack NY 10994
Fences & Gates, Decks & Railing

Fesco Fence, established in 1969, is a family-owned and operated provider of fences, gates, decks, railings, sheds, gazebos, arbors, and trellises. Founded by a retired NYC Police Department officer, ...

All Westchester Garage Doors

All Westchester Garage Doors

★★★★☆ 3.9 / 5 (7)
132 Union Ave, New Rochelle NY 10801
Garage Door Services, Fences & Gates

All Westchester Garage Doors is a family-owned garage door and gate service provider based in New Rochelle, NY, serving Westchester County. Founded by a former garage door technician who saw a need fo...

Salem Fence

Salem Fence

★★★★☆ 4.2 / 5 (15)
34 Tomahawk St, Baldwin Place NY 10505
Fences & Gates, Decks & Railing

Salem Fence, established in 1969, is a family-operated fencing and deck company serving Westchester and Putnam counties. Originally founded by Vincent Bellissimo, Sr. in The Bronx, the business expand...

American Improvements

American Improvements

★★★★★ 5.0 / 5 (3)
Elmsford NY 10523
General Contractors, Fences & Gates

American Improvements serves as a general contractor for residential and commercial projects in Westchester County, NY, with a particular focus on Elmsford and the surrounding Tri-State area. The comp...

Servello Contracting

Servello Contracting

★☆☆☆☆ 1.0 / 5 (1)
Bronx NY 10461
General Contractors, Flooring, Fences & Gates

Servello Contracting, based in the Bronx, NY, is a general contracting firm specializing in home renovations with a focus on bathroom remodeling, kitchen remodeling, flooring, tiling, deck constructio...



Estimated Fencing Costs in Gang Mills, NY

Emergency Fence/Gate RepairStorm / Security Response
$299 - $404
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,074 - $1,439

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Gang Mills. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

Am I legally required to talk to my neighbor before replacing our shared fence?

Yes. New York Real Property Actions and Proceedings Law Section 843, often called the 'Good Neighbor Fence Law,' requires written notice to adjoining owners at least 30 days before beginning work on a shared boundary line in Gang Mills. This 2026 legal step is mandatory for establishing cost-sharing and preventing disputes.

Why do fence posts in Gang Mills need to be set so deep?

The 42-inch frost line depth is the critical factor. Footings must extend below this depth to prevent frost heave, which can lift posts 2-3 inches per freeze-thaw cycle. Posts set in shallow concrete will fail structurally within two winters. This follows IRC Section R403.1.4.1 for frost-protected footings.

What are the height and placement rules for a fence on my property?

Gang Mills zoning enforces a 4-foot height limit in front yards and a 6-foot limit in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, a visibility 'sight triangle' must be maintained—this is critical for safety near high-traffic corridors like I-86. Vegetation or fencing cannot obstruct driver sightlines.

What is required before you dig the first post hole?

Call Dig Safely New York (811) at least 2 full business days before any excavation. Hitting a utility line in Gang Mills creates major liability for repair costs and service outages. Our crew manages the permit paperwork with the local office concurrently. We never start a project without a clear utility locate report in hand.

What fencing material lasts longest in Gang Mills soil?

Material compatibility is driven by moderate soil corrosivity and a moderate termite risk level. Pressure-treated pine posts must use ground-contact rated preservatives. For metal, hot-dip galvanized steel or aluminum with powder-coated finishes is required. Always use stainless steel or triple-coated fasteners to prevent rust streaks from forming on the finish.

Is a standard fence strong enough for local storms?

No. The 115 MPH V-ult wind speed rating for the region dictates the design. Standard 8-foot post spacing often fails. Engineering to ASCE 7-22 standards requires closer post spacing (6 feet or less), deeper concrete footings below frost, and reinforced metal post brackets to resist peak storm season gusts, especially near open areas.

Can I have a smart gate with a pool?

Yes, but integration is key. Any gate providing pool access must have a self-closing, self-latching mechanism per NYS Uniform Code 1603.2. Modern IoT smart latches, while a low-medium trend here, can meet this code if they default to a latched position during a power failure. This combines convenience with strict liability protection.

How soon can you start a consultation for a new fence?

We typically schedule consultations within 48 hours. Our standard route from the Painted Post High School area uses I-86 for efficient dispatch, resulting in a 15-20 minute response time to most Gang Mills neighborhoods. We confirm the site address and project scope before the visit to provide an immediate, on-site assessment.



Scroll to Top
CALL US NOW