Top Fencing Companies in Highlands, NY, 10911 | Compare & Call
There are 66 fencing companies server in Highlands NY
JF Iron And Steel Works
JF Iron And Steel Works in Yonkers, NY, is a family-run metal fabrication shop with over 25 years of hands-on experience. We specialize in custom architectural metalwork using aluminum, steel, stainle...
Manuel's Fence and Construction has been serving Peekskill and the Hudson Valley since 2001. We install and repair stockade, chain link, aluminum, and custom wood fences, plus offer landscaping, mason...
SJB Fence & Railings, a family-owned business based in Wappingers Falls, has been serving the Hudson Valley since 1995. Founded as a part-time repair operation, the company incorporated in 2013 and no...
Jose Z Construction
Jose Z Construction is a family-owned masonry and landscape contractor serving Wappingers Falls and the Mid-Hudson Valley since 1999. With over 25 years of experience, we specialize in outdoor constru...
HV Renovations has been serving the Hudson Valley for over 20 years from our base in Newburgh, NY. We specialize in all phases of residential construction, from small bathroom remodels to building cus...
Hudson Valley DogWatch, based in Cornwall-on-Hudson, NY, has been a family-owned business since 1991, originally founded as Hudson Valley Boundaries and rebranded under new ownership in 2019. We speci...
Artistic Landscapes LLC, owned by Rhett Goslar, is a Montgomery, NY-based landscaping and hardscaping company serving Orange County and the Hudson Valley. With over fifteen years of experience, Rhett ...
Wilson Affordable Home Improvement
Wilson Affordable Home Improvement is a family-owned general contractor based in Stony Point, NY, serving Rockland County and surrounding areas. Founded on a legacy of hard work and customer satisfact...
Superior Lawns and Landscaping has been serving Rockland County since 1986, and we’re proud to be based right here in Congers. As an ICPI certified contractor, we offer a full range of outdoor service...
D-Fence is a family-owned fencing company based in Brewster, NY, with over 55 years of experience. Founded in 1969, the business was started by the owner's father, and the current owner and his brothe...
Estimated Fencing Costs in Highlands, NY
FAQs
What are the height and setback rules for fences in the Town of Highlands?
Zoning limits are 4 feet in front yards and 6 feet in rear/side yards. A 0-foot setback is permitted, allowing installation directly on the property line. For corner lots, especially near US-9W, maintaining a clear 'sight triangle' at intersections is critical for driver visibility and is enforced by the Building Department.
What is the typical timeline and route for a consultation in Highland Falls?
We schedule consultations within 5-7 business days. Our standard route from the United States Military Academy area uses US-9W, resulting in a consistent 25-35 minute response window to most neighborhoods in Highland Falls, pending US-9W traffic conditions.
Why must fence posts be set below the 42-inch frost line in Highland Falls?
The IRC mandates footings extend below the frost line to prevent frost heave. In Highland Falls, with a 42-inch frost depth, posts set shallower will lift during freeze-thaw cycles, compromising structural stability and alignment of the entire fence line.
How does moderate soil corrosivity and termite risk affect material selection?
Moderate soil conditions accelerate corrosion of standard steel posts and fasteners. We specify hot-dip galvanized or stainless-steel brackets and hardware to prevent rust streaks and failure. For termite risk, pressure-treated wood must bear proper ground-contact ratings, and composite materials offer a durable, pest-resistant alternative.
What is the utility locate process before digging fence post holes?
New York state law requires a call to 811 at least two full business days before any excavation. In Highland Falls, hitting a buried line is a major liability involving repair costs and fines. The service marks public utilities; private lines must be located separately. We manage all related permit office paperwork for the Town of Highlands as part of the project scope.
How is a fence engineered for the 115 MPH V-ult wind rating in this area?
The V-ult (ultimate wind speed) rating of 115 MPH, per ASCE 7-22 standards, dictates the structural design. This requires reduced post spacing (often 6 feet on-center or less), deeper concrete footings, and wind-rated tension brackets to transfer loads into the ground, ensuring the fence survives peak storm season gusts common near West Point.
How do modern gate systems align with New York's pool safety code?
NY State Building Code Part 1220 requires pool barriers with self-closing, self-latching gates. A moderate smart-gate trend integrates IoT-controlled latches that provide remote status monitoring and automatic closure logs, creating a verifiable record to meet updated liability standards for New York homeowners.
What are my legal obligations when replacing a shared fence on the property line in Highlands, NY?
New York RPAPL Section 871, the 'Good Neighbor' law, requires written notice to adjoining owners at least 30 days before work begins on a shared partition fence. In 2026, this notification is a strict prerequisite for any project on a boundary line in the Town of Highlands.