Top Fencing Companies in Jackson, NY, 12816 | Compare & Call

Jackson Fencing Company

Jackson Fencing Company

Jackson, NY
Fencing Company

Phone : 888-524-1778

Jackson Fencing Company provides professional fence installation, repair, and replacement services in Jackson, state-short for residential and commercial properties.
FEATURED

There are 19 fencing companies server in Jackson NY

Just Fencing Around

Just Fencing Around

Rochester NY 14626
Fences & Gates

Just Fencing Around is a family-owned and operated fence company in Rochester, NY, built on trust, craftsmanship, and hands-on experience. We offer professional service with a personal touch, providin...

Residential Railing & Fence Company

Residential Railing & Fence Company

★★★★★ 5.0 / 5 (1)
689 Trabold Rd, Rochester NY 14624
Metal Fabricators, Fences & Gates, Decks & Railing

Residential Railing & Fence Company, based in Rochester, NY, has been handcrafting custom metalwork since 2003. We specialize in wrought iron railings and fences, but also work with stainless steel, a...

Unlimited Fence Solutions

Unlimited Fence Solutions

★★★★★ 5.0 / 5 (2)
7332 Community Dr, Lima NY 14485
Fences & Gates

Unlimited Fence Solutions, based in Lima, NY, has been serving the community since 2018, backed by over 20 years of industry expertise. We specialize in fence and gate installation, repair, painting, ...

Rochester Metalworks & Design

Rochester Metalworks & Design

★★★★★ 5.0 / 5 (1)
11 Nester St, Rochester NY 14621
Decks & Railing, Metal Fabricators, Fences & Gates

Rochester Metalworks & Design, based in Rochester, NY, is a custom metal fabrication company known for designing, fabricating, and installing wrought iron railings, fences, gates, and security doors f...

Ike Fencing

Ike Fencing

Lancaster NY 14086
Fences & Gates

Ike Fencing has been a trusted provider of fencing and gate services in Lancaster, NY, and the greater Buffalo area. We specialize in agricultural, residential, and commercial fencing solutions, from ...

Scott's Landscaping and Fencing

Scott's Landscaping and Fencing

★★★★☆ 3.5 / 5 (2)
Rochester NY 14606
Masonry/Concrete, Fences & Gates, Landscaping

Scott's Landscaping and Fencing, based in Rochester, NY, has spent over 29 years transforming outdoor spaces for residential and commercial clients. We specialize in custom fencing (wood, vinyl, chain...

BF&R Fence

BF&R Fence

★★☆☆☆ 1.8 / 5 (4)
5265 St Paul Blvd, Rochester NY 14617
General Contractors, Fences & Gates

BF&R Fence, based in Rochester, NY, has been family-owned and operated since 2001 by Jeremy Malone. With over two decades of experience, the company serves residential, commercial, and industrial clie...

ACIA Construction LLC

ACIA Construction LLC

2652 Ridge Rd, Ontario NY 14519
Fences & Gates

ACIA Construction LLC, established in 2014, provides comprehensive fence and gate services to residential and commercial clients in Ontario, NY, and the surrounding communities near Lake Ontario. As a...

Protect-A-Child Pool Fence of Syracuse

Protect-A-Child Pool Fence of Syracuse

693 Masters Rd, Elbridge NY 13039
Pool & Hot Tub Service, Childproofing, Fences & Gates

Protect-A-Child Pool Fence of Syracuse serves Elbridge, NY, and the surrounding areas with specialized pool safety and fencing solutions. Located just minutes from the historic Elbridge Village Park a...

Rochester Landscape Designs

Rochester Landscape Designs

★★☆☆☆ 2.0 / 5 (1)
25 Charleswood Dr, Pittsford NY 14534
Landscaping, Fences & Gates, Landscape Architects or Designers

Rochester Landscape Designs, established in 2012, brings over 25 years of combined experience to the Pittsford area. Founded by a SUNY ESF graduate in Landscape Architecture, the company specializes i...

« PreviousPage 1 of 2Next Page »


Estimated Fencing Costs in Jackson, NY

Emergency Fence/Gate RepairStorm / Security Response
$299 - $404
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$39 - $59
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,074 - $1,439

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Jackson. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

What are the height and setback rules for a fence in Jackson?

Jackson zoning enforces a 4-foot height limit in front yards and 6 feet in rear yards. The standard setback is 0 feet, allowing installation directly on the property line. Corner lots require special attention. A 15-foot 'sight triangle' must be maintained from the intersection of property lines, where fences cannot exceed 3 feet in height. This is critical for visibility near high-traffic corridors like NY-22.

How do wind loads from storms affect fence design?

Jackson's 115 MPH V-ult (Ultimate Design Wind Speed) rating from ASCE 7-22 standards dictates structural engineering. This wind speed governs post spacing, concrete footing size, and bracket strength. A standard 6-foot panel fence requires posts spaced no more than 8 feet on center, set in concrete below the frost line, to survive peak storm season gusts common in the region.

What is the required process before digging fence post holes?

You must contact Dig Safely New York at 811 at least two full business days before excavation. This free utility locate service marks all buried lines. Hitting an unmarked utility line in Jackson Heights carries major financial liability and safety risks. Concurrently, a building permit from the Jackson permit office is required. We manage this paperwork to ensure the project meets all local codes before the first post is set.

Why do my fence posts need to be set below the frost line?

Jackson's 48-inch frost line depth is critical for structural stability. Posts set above this depth are subject to frost heave, where freezing ground water expands and lifts the footing. This cycle causes posts in Jackson Heights to tilt and fail. The International Residential Code (IRC) mandates footings extend a minimum of 12 inches below the undisturbed earth and below the local frost line to prevent this damage.

How does Jackson's soil and termite risk affect material choice?

Jackson's moderate soil corrosivity index and moderate termite risk dictate material compatibility. Pressure-treated wood rated for ground contact is essential. For metal posts and hardware, hot-dip galvanized or stainless-steel fasteners are required to prevent rust streaks from corrosion. Composite materials offer high resistance to both moisture and insects. Material selection directly impacts the fence's lifespan and maintenance costs.

Do smart gates meet modern safety and liability standards?

Yes, when properly integrated. A smart gate system with an IoT-controlled latch must still comply with the New York State Uniform Code, specifically Appendix G for pool safety. This requires self-closing, self-latching mechanisms that engage automatically. Modern systems can log access and send tamper alerts, creating an audit trail that meets contemporary liability standards for New York homeowners, especially for properties with pools.

Am I legally required to notify my neighbor before building a fence?

Yes, under the New York Fences and Trees Statute (RPAPL 843). For any fence on or within three feet of a shared boundary, you must provide a formal 'Notice of Intent to Erect a Fence' to the adjoining owner at least 30 days before starting work. This 2026 legal requirement is mandatory in Jackson for replacing an existing shared boundary or 'partition fence' and helps prevent neighbor disputes.

How soon can a consultation be scheduled, and what is the response time?

Consultations are scheduled within 48 hours. Our standard dispatch route from the Jackson Town Hall area uses NY-22 for direct access to Jackson Heights, ensuring a consistent 25-35 minute response window for site assessments. This efficiency allows for rapid project evaluation and quoting based on current labor rates and material availability.



Scroll to Top
CALL US NOW