Top Fencing Companies in Little Neck, NY, 11362 | Compare & Call

Little Neck Fencing Company

Little Neck Fencing Company

Little Neck, NY
Fencing Company

Phone : 888-524-1778

Little Neck Fencing Company provides expert fence replacement and repair services in Little Neck, state-short using premium-quality materials and proven installation methods.
FEATURED

There are 193 fencing companies server in Little Neck NY

M&M Iron Works and Gates

M&M Iron Works and Gates

★★★★★ 5.0 / 5 (7)
Brooklyn NY 11237
Fences & Gates, Metal Fabricators

M&M Iron Works and Gates is a family-owned metal fabrication and fencing company serving Brooklyn, NY. Specializing in fence and gate installation, repair, and custom metalwork, they help local homeow...

Ronald Quality Fence

Ronald Quality Fence

★★★★★ 4.9 / 5 (145)
West Babylon NY 11704
Fences & Gates

Ronald Quality Fence has been serving West Babylon, Long Island, and NYC for over 20 years. As a licensed fence installation company, we specialize in a full range of fencing solutions including PVC r...

S & S Creative Iron Work

S & S Creative Iron Work

★★★★☆ 4.1 / 5 (13)
103 21 100st S, Ozone park NY 11420
Metal Fabricators, Fences & Gates, Decks & Railing

S & S Creative Iron Work Inc. is a family-oriented metal fabrication and fence contracting company based in South Ozone Park, NY. We treat every customer like family, taking pride in reliable, quality...

Ace Fence Company of New York

Ace Fence Company of New York

★★★★★ 5.0 / 5 (1)
New Hyde Park NY 11040
Fences & Gates

Ace Fence Company of New York, serving New Hyde Park and the surrounding area, is a family-owned business operated by the Paradise family for over 50 years. We provide both commercial and residential ...

R & A Welding

R & A Welding

★★★★☆ 4.2 / 5 (36)
736 Belmont Ave, Brooklyn NY 11208
Metal Fabricators, Fences & Gates, Decks & Railing

R&A Welding is a family-owned iron works business based in Brooklyn, NY, serving the tri-state area since its founding. Owner Anthony brings decades of hands-on experience in metal fabrication, custom...

Energy Fencing

Energy Fencing

★★★★★ 4.7 / 5 (29)
614 Bradford St, Brooklyn NY 11207
Fences & Gates

Energy Fencing Inc. has served Brooklyn homeowners and businesses for over 20 years, offering a full range of fencing and gate solutions. From PVC and wrought iron to aluminum and chain link, we handl...

Paradise Fence Supply

Paradise Fence Supply

★★★★☆ 4.0 / 5 (25)
15302 Baisley Blvd, Jamaica NY 11434
Building Supplies, Fences & Gates, Decks & Railing

Paradise Fence Supply is a family-owned fence supplier based in Jamaica, NY, offering a wide selection of American-made fencing including vinyl, chain-link, wood, and ornamental styles. We serve resid...

Design Fencing

Design Fencing

★★★★★ 4.7 / 5 (17)
51 Ackerman St, Staten Island NY 10308
Masonry/Concrete, Fences & Gates, Decks & Railing

Design Fencing is a family-owned and operated company based in Staten Island, NY, with 25 years of experience serving New York and New Jersey residents. We specialize in masonry, concrete, fences, gat...

Onafastpace Contracting

Onafastpace Contracting

★★★★★ 5.0 / 5 (7)
Brooklyn NY 11234
Artificial Turf, Decks & Railing, Fences & Gates

Onafastpace Contracting is a Brooklyn-based team specializing in low-maintenance outdoor living solutions, including artificial turf, decks, railings, fences, and gates. Serving both residential and c...

Doctor Gate

Doctor Gate

★★★★☆ 4.3 / 5 (29)
Brooklyn NY 11231
Fences & Gates, Garage Door Services, Door Sales/Installation

Doctor Gate has been serving Brooklyn and all five boroughs of New York City for over 20 years, specializing in fence and gate services, garage doors, and overhead doors. We handle everything from rol...

« PreviousPage 1 of 20Next Page »


Estimated Fencing Costs in Little Neck, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Little Neck. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

Why do fence posts in Little Neck fail if they aren't set deep enough?

The frost line depth in this area is 42 inches. When the ground freezes, it heaves upward. Posts set above this line will be lifted by frost heave, causing the structure to rack and fail. The IRC requires footings to extend below the frost line to ensure stability. For a 6-foot fence, this means a post hole depth of approximately 48 inches is standard to achieve proper embedment below the frost line.

How soon can a specialist visit my property for a consultation?

A structural perimeter specialist can typically be dispatched within 2-3 business days. The standard route from our Douglaston Park area staging is via the I-495 service roads, allowing for a 35-45 minute travel time to most addresses in Little Neck for an initial site assessment, zoning review, and wind exposure evaluation.

Am I legally required to notify my neighbor before replacing our shared fence?

Yes. New York Real Property Actions and Proceedings Law Section 843, often called the 'Good Neighbor Fence Law,' requires written notice to adjoining owners 30 days before beginning work on a partition fence. In Little Neck, this 2026 legal requirement is a critical step to establish shared cost responsibility and prevent disputes. You must provide specifications and a cost estimate.

How do modern pool fence requirements integrate with smart gate technology?

NYC Construction Code Section 3109 mandates a minimum 48-inch barrier with self-closing, self-latching gates. Modern smart gate systems use IoT-integrated latches that log access and can send alerts. This integration meets the code's mechanical requirements while providing a digital audit trail, which is becoming a standard for managing liability. A properly integrated system satisfies both 2026 security trends and legal safety standards.

What fencing materials are suitable for Little Neck's soil and pest conditions?

The soil has a moderate corrosivity index, and termite risk is moderate. Pressure-treated wood, cedar, or composite materials are common. For metal posts and hardware, specify G90 galvanized or powder-coated steel to resist rust. Using stainless steel fasteners prevents rust streaks on lighter materials. Incompatible materials or untreated wood in direct soil contact will lead to premature failure from corrosion or insect damage.

What is the required process before digging fence post holes?

You must contact New York 811 at least two full business days before excavation. They will coordinate with all utility companies to mark underground lines. Hitting a gas, electric, or fiber line in Little Neck is a major liability that can result in service outages, fines, and repair costs. We manage the 811 ticket and coordinate the required NYC Department of Buildings permit paperwork to ensure the project starts with cleared legal and safety ground.

What are the height and placement rules for a fence on my property?

Standard NYC zoning applies in Little Neck. The height limit is 4 feet for front yards and 6 feet for rear and side yards. A 0-foot setback is permitted, meaning you can build directly on your property line. For corner lots, you must maintain a clear 'sight triangle' at intersections. Proximity to I-495 requires careful assessment, as local traffic engineers may enforce stricter visibility requirements for safety.

How do wind loads from the Long Island Expressway affect fence design?

The design wind speed for Little Neck is 120 MPH (V-ult) per ASCE 7-22 standards. Exposure from I-495 and open areas near Douglaston Park can create higher localized gusts. This V-ult rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A standard 8-foot panel may require intermediate posts or heavier-gauge materials to survive peak storm season winds without racking or collapse.



Scroll to Top
CALL US NOW