Top Fencing Companies in Little Neck, NY, 11362 | Compare & Call

There are 193 fencing companies server in Little Neck NY

Grand Entrance Gates

Grand Entrance Gates

★★☆☆☆ 2.3 / 5 (3)
Mount Kisco NY 10549
Fences & Gates

Grand Entrance Gates, based in Mount Kisco, NY, specializes in the custom design, installation, and maintenance of wrought iron and wood gates, railings, and automated entry systems. Serving the trist...

Kylin Steel Decoration

Kylin Steel Decoration

Brooklyn NY 11366
Fences & Gates

Kylin Steel Decoration is a Brooklyn-based fence and gate specialist serving neighborhoods from Park Slope to Williamsburg. We understand that Brooklyn homes face unique challenges like sagging gates ...

Creative Contracting

Creative Contracting

★★★☆☆ 3.4 / 5 (5)
475 Warren St, Westbury NY 11590
Landscaping, Masonry/Concrete, Fences & Gates

Creative Contracting, founded in 2005, is a Westbury-based home improvement contractor run by owner Pravit (known as Junior). Specializing in masonry, concrete work, and landscaping, the company offer...

Serrano Fence & Son

Serrano Fence & Son

★★☆☆☆ 2.0 / 5 (8)
5000 Long Beach Rd, Island Park NY 11558
Fences & Gates, Demolition Services, Pressure Washers

Serrano Fence & Son, Inc. has been a trusted fencing contractor in Island Park, NY since 2001. We specialize in installing and repairing a wide variety of fences including vinyl, aluminum, wood, and c...

Uncle Marino's Home Improvement

Uncle Marino's Home Improvement

Elmont NY 11003
Painters, Fences & Gates, Pool & Hot Tub Service

Uncle Marino's Home Improvement, owned by Marino Reyes, is a home services company based in Elmont, NY, specializing in painting, fencing, and pool services. The business was born from a personal chal...

Southside Fence, Railings & Sheds, Inc

Southside Fence, Railings & Sheds, Inc

★★★★☆ 3.5 / 5 (13)
1190 Sunrise Hwy, Copiague NY 11726
Fences & Gates, Sheds & Outdoor Storage

Southside Fence, Railings & Sheds, Inc. is a family-owned and operated business serving Copiague and the greater Long Island area. We specialize in the installation, repair, and maintenance of fences,...

Iron Works 777

Iron Works 777

47 Ash St, Yonkers NY 10701
Metal Fabricators, Fences & Gates, Decks & Railing

Iron Works 777 is a family-owned metal fabrication and contracting business serving Yonkers, NY. Specializing in custom fences, gates, decks, and railings, the company addresses common local challenge...

B & A Tree service Masonry Fence & more

B & A Tree service Masonry Fence & more

★★★★★ 5.0 / 5 (2)
Deer Park NY 11729
Tree Services, Fences & Gates, Masonry/Concrete

B & A Tree service Masonry Fence & more has been serving Deer Park, NY, and surrounding areas for over five years. We specialize in tree services, masonry, and fence and gate installation. Our team of...

New York Fence Pro

New York Fence Pro

3 Taurgo Ln, Centereach NY 11720
Fences & Gates, Decks & Railing

New York Fence Pro, founded in 2023, is a residential fencing company based in Centereach, NY, dedicated to providing durable and attractive fencing solutions for Long Island homeowners. We specialize...

PMF II

PMF II

★★★☆☆ 2.5 / 5 (11)
88 E Merrick Rd, FREEPORT NY 11520
Decks & Railing, Fences & Gates, Metal Fabricators

PMF II is a trusted local contractor serving Freeport, NY, specializing in decks, fences, gates, and metal fabrication. Many Freeport homes face fencing issues like sagging gates and wood fence cracki...



Estimated Fencing Costs in Little Neck, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Little Neck. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

Why do fence posts in Little Neck fail if they aren't set deep enough?

The frost line depth in this area is 42 inches. When the ground freezes, it heaves upward. Posts set above this line will be lifted by frost heave, causing the structure to rack and fail. The IRC requires footings to extend below the frost line to ensure stability. For a 6-foot fence, this means a post hole depth of approximately 48 inches is standard to achieve proper embedment below the frost line.

How soon can a specialist visit my property for a consultation?

A structural perimeter specialist can typically be dispatched within 2-3 business days. The standard route from our Douglaston Park area staging is via the I-495 service roads, allowing for a 35-45 minute travel time to most addresses in Little Neck for an initial site assessment, zoning review, and wind exposure evaluation.

Am I legally required to notify my neighbor before replacing our shared fence?

Yes. New York Real Property Actions and Proceedings Law Section 843, often called the 'Good Neighbor Fence Law,' requires written notice to adjoining owners 30 days before beginning work on a partition fence. In Little Neck, this 2026 legal requirement is a critical step to establish shared cost responsibility and prevent disputes. You must provide specifications and a cost estimate.

How do modern pool fence requirements integrate with smart gate technology?

NYC Construction Code Section 3109 mandates a minimum 48-inch barrier with self-closing, self-latching gates. Modern smart gate systems use IoT-integrated latches that log access and can send alerts. This integration meets the code's mechanical requirements while providing a digital audit trail, which is becoming a standard for managing liability. A properly integrated system satisfies both 2026 security trends and legal safety standards.

What fencing materials are suitable for Little Neck's soil and pest conditions?

The soil has a moderate corrosivity index, and termite risk is moderate. Pressure-treated wood, cedar, or composite materials are common. For metal posts and hardware, specify G90 galvanized or powder-coated steel to resist rust. Using stainless steel fasteners prevents rust streaks on lighter materials. Incompatible materials or untreated wood in direct soil contact will lead to premature failure from corrosion or insect damage.

What is the required process before digging fence post holes?

You must contact New York 811 at least two full business days before excavation. They will coordinate with all utility companies to mark underground lines. Hitting a gas, electric, or fiber line in Little Neck is a major liability that can result in service outages, fines, and repair costs. We manage the 811 ticket and coordinate the required NYC Department of Buildings permit paperwork to ensure the project starts with cleared legal and safety ground.

What are the height and placement rules for a fence on my property?

Standard NYC zoning applies in Little Neck. The height limit is 4 feet for front yards and 6 feet for rear and side yards. A 0-foot setback is permitted, meaning you can build directly on your property line. For corner lots, you must maintain a clear 'sight triangle' at intersections. Proximity to I-495 requires careful assessment, as local traffic engineers may enforce stricter visibility requirements for safety.

How do wind loads from the Long Island Expressway affect fence design?

The design wind speed for Little Neck is 120 MPH (V-ult) per ASCE 7-22 standards. Exposure from I-495 and open areas near Douglaston Park can create higher localized gusts. This V-ult rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A standard 8-foot panel may require intermediate posts or heavier-gauge materials to survive peak storm season winds without racking or collapse.



Scroll to Top
CALL US NOW