Top Fencing Companies in Little Neck, NY, 11362 | Compare & Call

There are 193 fencing companies server in Little Neck NY

Ironwork NYC

Ironwork NYC

★★★★★ 5.0 / 5 (2)
Long Island City NY 11101
Metal Fabricators, Fences & Gates

Ironwork NYC is a trusted metal fabrication and fencing company serving Long Island City, NY, and the surrounding neighborhoods. Located near landmarks like Gantry Plaza State Park and MoMA PS1, we sp...

North Shore Fence

North Shore Fence

★★★★☆ 4.3 / 5 (19)
100 Jericho Tpke, Westbury NY 11590
Fences & Gates, Decks & Railing

North Shore Fence, established in 1977, is a family-owned and operated business serving Westbury, NY, and surrounding areas. We specialize in the installation, repair, and replacement of residential f...

Liberty Fence & Railing

Liberty Fence & Railing

★★★☆☆ 2.6 / 5 (117)
775 Meacham Ave, Elmont NY 11003
Fences & Gates, Decks & Railing

Liberty Fence & Railing, based in Elmont, NY, has been fabricating and installing fences, gates, and railings for 47 years. As a licensed and insured contractor, we specialize in 100% pure virgin viny...

K &Y Fence

K &Y Fence

★★★★★ 4.7 / 5 (3)
Amityville NY 11701
Fences & Gates

K & Y Fence Corp has served Long Island for over 15 years, delivering fence and gate solutions for homes and businesses in Amityville. We specialize in installing aluminum, vinyl, and chain link fence...

ARB Fence Corp

ARB Fence Corp

★★★★★ 5.0 / 5 (13)
1032 Cleveland St, Uniondale NY 11553
Fences & Gates, Decks & Railing

Based in Uniondale, NY, ARB Fence Corp has been serving homeowners and businesses since 2013. As a licensed and insured contractor, we specialize in fence and gate installation, repair, and maintenanc...

Tf Doors

Tf Doors

★☆☆☆☆ 1.0 / 5 (1)
131-25 Fowler Ave, Flushing NY 11355
Fences & Gates, Door Sales/Installation, Decks & Railing

Tf Doors, based in Flushing, NY, has been serving the community for over 10 years as a specialist in stainless steel and glass products. The company offers a full range of services including door inst...

Benny Ironworks

Benny Ironworks

★★☆☆☆ 1.5 / 5 (13)
Jamaica NY 11432
Metal Fabricators, Fences & Gates, Decks & Railing

Benny Ironworks is a locally owned metal fabrication company serving Jamaica, NY, with over ten years of experience. We specialize in custom metal fabrication, deck construction, repair, and replaceme...

Above All Fence

Above All Fence

★★★★☆ 4.0 / 5 (10)
3310 Sunrise Hwy, East Islip NY 11730
Fences & Gates

Above All Fence has served East Islip and the surrounding communities since 1985 as a licensed fencing contractor. Located near the intersection of Montauk Highway and Carleton Avenue, our showroom pr...

Cruz Rodriguez Construction

Cruz Rodriguez Construction

★★★★★ 5.0 / 5 (1)
417 Hawthorne Ave, Uniondale NY 11553
Fences & Gates, Snow Removal, Masonry/Concrete

Cruz Rodriguez Construction is a trusted local contractor serving Uniondale, NY, specializing in fences & gates, snow removal, and masonry/concrete. Many homes in neighborhoods near Nassau Community C...

Reliable Windows

Reliable Windows

Queens NY 11432
Windows Installation, Fences & Gates, Awnings

Reliable Windows, a second-generation window installation company, has been serving New York's five boroughs and Long Island for over a decade. Based in Queens, we specialize in window replacement, in...



Estimated Fencing Costs in Little Neck, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Little Neck. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

Why do fence posts in Little Neck fail if they aren't set deep enough?

The frost line depth in this area is 42 inches. When the ground freezes, it heaves upward. Posts set above this line will be lifted by frost heave, causing the structure to rack and fail. The IRC requires footings to extend below the frost line to ensure stability. For a 6-foot fence, this means a post hole depth of approximately 48 inches is standard to achieve proper embedment below the frost line.

How soon can a specialist visit my property for a consultation?

A structural perimeter specialist can typically be dispatched within 2-3 business days. The standard route from our Douglaston Park area staging is via the I-495 service roads, allowing for a 35-45 minute travel time to most addresses in Little Neck for an initial site assessment, zoning review, and wind exposure evaluation.

Am I legally required to notify my neighbor before replacing our shared fence?

Yes. New York Real Property Actions and Proceedings Law Section 843, often called the 'Good Neighbor Fence Law,' requires written notice to adjoining owners 30 days before beginning work on a partition fence. In Little Neck, this 2026 legal requirement is a critical step to establish shared cost responsibility and prevent disputes. You must provide specifications and a cost estimate.

How do modern pool fence requirements integrate with smart gate technology?

NYC Construction Code Section 3109 mandates a minimum 48-inch barrier with self-closing, self-latching gates. Modern smart gate systems use IoT-integrated latches that log access and can send alerts. This integration meets the code's mechanical requirements while providing a digital audit trail, which is becoming a standard for managing liability. A properly integrated system satisfies both 2026 security trends and legal safety standards.

What fencing materials are suitable for Little Neck's soil and pest conditions?

The soil has a moderate corrosivity index, and termite risk is moderate. Pressure-treated wood, cedar, or composite materials are common. For metal posts and hardware, specify G90 galvanized or powder-coated steel to resist rust. Using stainless steel fasteners prevents rust streaks on lighter materials. Incompatible materials or untreated wood in direct soil contact will lead to premature failure from corrosion or insect damage.

What is the required process before digging fence post holes?

You must contact New York 811 at least two full business days before excavation. They will coordinate with all utility companies to mark underground lines. Hitting a gas, electric, or fiber line in Little Neck is a major liability that can result in service outages, fines, and repair costs. We manage the 811 ticket and coordinate the required NYC Department of Buildings permit paperwork to ensure the project starts with cleared legal and safety ground.

What are the height and placement rules for a fence on my property?

Standard NYC zoning applies in Little Neck. The height limit is 4 feet for front yards and 6 feet for rear and side yards. A 0-foot setback is permitted, meaning you can build directly on your property line. For corner lots, you must maintain a clear 'sight triangle' at intersections. Proximity to I-495 requires careful assessment, as local traffic engineers may enforce stricter visibility requirements for safety.

How do wind loads from the Long Island Expressway affect fence design?

The design wind speed for Little Neck is 120 MPH (V-ult) per ASCE 7-22 standards. Exposure from I-495 and open areas near Douglaston Park can create higher localized gusts. This V-ult rating dictates post spacing, concrete footing size, and the required strength of post-to-rail brackets. A standard 8-foot panel may require intermediate posts or heavier-gauge materials to survive peak storm season winds without racking or collapse.



Scroll to Top
CALL US NOW