Top Fencing Companies in Mount Vernon, NY, 10550 | Compare & Call

There are 187 fencing companies server in Mount Vernon NY

Supremacy Garage Doors & Gates

Supremacy Garage Doors & Gates

★★★★★ 4.6 / 5 (23)
115-10 Queens Blvd FL1, Forest Hills NY 11375
Garage Door Services, Fences & Gates

Since 2009, Supremacy Garage Doors & Gates has served Forest Hills, NY, with a focus on precision and reliability. Founded on principles of perfectionism, punctuality, and respect, the company provide...

TBS Garage Door

TBS Garage Door

New York NY 10118
Garage Door Services, Fences & Gates

TBS Garage Door provides garage door, fence, and gate services across New York, NY, serving neighborhoods from the Upper East Side to Brooklyn Heights. Many local homes face fencing issues like leanin...

Davila Weld

Davila Weld

★★★★★ 5.0 / 5 (1)
854 Knickerbocker Ave Rear Shop, New York NY 11207
Fences & Gates, Metal Fabricators, Glass & Mirrors

Founded by Luis in 2015, Davila Weld (also known as Da Vila Welding Inc.) brings over 20 years of hands-on metal fabrication and structural welding experience to Brooklyn and the greater NYC area. Spe...

SR Ironworks

SR Ironworks

186 Jamaica Ave Queens, HOLLIS NY 11423
Awnings, Fences & Gates, Decks & Railing

SR Ironworks has been serving the Hollis, NY community for years, offering professional installation, repair, and maintenance of awnings, fences, gates, and decks. We understand the local climate and ...

Ny Steel Tech

Ny Steel Tech

4707 Barnett Ave, Sunnyside NY 11104
General Contractors, Metal Fabricators, Fences & Gates

Ny Steel Tech, located in Sunnyside, NY, is a trusted general contractor and metal fabricator specializing in fences and gates. Serving the local community near Sunnyside Gardens and along Queens Boul...

Bulls Iron Works

Bulls Iron Works

★★★★★ 5.0 / 5 (2)
2762 W 15th St, Brooklyn NY 11224
Metal Fabricators, Fences & Gates, Decks & Railing

Bulls Iron Works, a family-owned business in Brooklyn, NY, has been crafting and installing custom ironwork since 1989. Founded by Ali and Javed Rao, who bring over 45 years of blacksmithing experienc...

A&B Iron Works

A&B Iron Works

★★★☆☆ 3.3 / 5 (6)
142 Conover St, Brooklyn NY 11231
Metal Fabricators, Fences & Gates, Awnings

A&B Iron Works has been serving Brooklyn for over 20 years, specializing in custom metal fabrication, fences, gates, and awnings. Located near the bustling neighborhoods of Williamsburg and Greenpoint...

Perfect Gates

Perfect Gates

★★★★★ 5.0 / 5 (2)
65-04 Forest Ave, Queens NY 11385
Fences & Gates, Garage Door Services

Perfect Gates Corp., owned by Eugene, is a bonded company serving Queens and all of New York City. We specialize in roll-up doors, garage doors, and ironwork, with technicians who bring many years of ...

Queens Gates and Ironworks

Queens Gates and Ironworks

★☆☆☆☆ 1.0 / 5 (1)
9610 34th Ave, Queens NY 11368
Fences & Gates, Garage Door Services, Security Systems

Queens Gates and Ironworks has been serving Queens, NY for over 16 years as a licensed, bonded, certified, and insured provider of fences, gates, garage doors, and security systems. We handle installa...

Fence & Gate Solutions

Fence & Gate Solutions

★★★★☆ 4.0 / 5 (4)
710 Morris Park Ave, The Bronx NY 10462
Fences & Gates

Fence & Gate Solutions is a family-owned and operated business serving The Bronx, NY. We specialize in installing and repairing all types of fences and gates, including vinyl, wood, aluminum, and chai...



Estimated Fencing Costs in Mount Vernon, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Mount Vernon. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

How deep should my fence posts go in Fleetwood?

Fence posts in Fleetwood require a 42-inch footing depth to reach below the frost line. Posts not set below this line are subject to frost heave, which will cause structural failure and misalignment within one or two winters. We design footings to IRC Section R403.1.4 standards to counter this uplift force.

How soon can you start a consultation in Fleetwood?

We typically schedule a site consultation within 48 hours. Our standard route from the St. Paul's Church National Historic Site area uses the Cross County Parkway, resulting in a 25-35 minute response window to most Fleetwood addresses. The consultation includes a zoning review and a wind load assessment for your specific lot.

Is my fence designed to handle high winds?

All fences are engineered for the local V-ult wind speed of 115 MPH. This rating dictates the maximum post spacing, concrete footing mass, and bracket strength required. We calculate loads per ASCE 7-22 standards to ensure the structure can survive peak storm season gusts without panel failure or overturning.

What are the height and setback rules for a fence in my yard?

Mount Vernon zoning limits fence heights to 4 feet in front yards and 6 feet in rear yards. A zero-foot setback is permitted, meaning you can build directly on your property line. For corner lots, you must maintain a clear 'sight triangle' at intersections to prevent visibility obstructions for traffic, a critical rule near the Cross County Parkway.

Can I have an automated gate if I have a pool?

Yes, but the gate system must integrate with pool safety codes. Under NYS Uniform Code Part 1220, any gate providing pool access must be self-closing and self-latching. Modern smart-gate IoT systems can be configured with these fail-safe mechanical latches, meeting both security trends and state liability standards for New York homeowners.

What fencing material holds up best to Mount Vernon's soil and pests?

Material compatibility is key given the moderate soil corrosivity index and termite risk. Pressure-treated pine or cedar are standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. For vinyl or aluminum, use only manufacturer-specified, corrosion-resistant hardware to avoid galvanic corrosion.

What is required before you dig the first post hole?

New York 811 must mark all public utility lines at least two business days before excavation. Hitting a buried line in Fleetwood is a major liability causing service outages and fines. We manage the 811 ticket and coordinate any required Mount Vernon Building Department permits to ensure the project starts with cleared legal and safety ground.

Am I legally required to notify my neighbor before building a fence in Mount Vernon?

Yes. Under N.Y. Town Law Section 300, you must provide written notice to adjoining property owners before altering a shared boundary or 'partition fence'. This is a formal 2026 requirement for Mount Vernon. Failure to provide notice can result in a legal dispute over the fence's placement and cost.



Scroll to Top
CALL US NOW