Top Fencing Companies in Mount Vernon, NY, 10550 | Compare & Call

There are 187 fencing companies server in Mount Vernon NY

Ameri Gates

Ameri Gates

★★★★★ 5.0 / 5 (2)
Brooklyn NY 11230
Fences & Gates, Door Sales/Installation, Garage Door Services

Ameri Gates is a family-owned security gate service based in Brooklyn, NY, with years of hands-on experience in the industry. We started from scratch, working as helpers and learning every aspect of g...

RLG Structural Contracting

RLG Structural Contracting

Larchmont NY 10538
Metal Fabricators, Fences & Gates, Decks & Railing

RLG Structural Contracting, located in Larchmont, NY, specializes in metal fabrication, fencing, gates, and deck railing. For local homeowners, common issues like gate latch failures and frozen gate h...

V & O Montalvan Fence

V & O Montalvan Fence

★★★★☆ 4.2 / 5 (92)
891 Nassau Rd, Uniondale NY 11553
Fences & Gates, Decks & Railing

V & O Montalvan Fence Corp., based in Uniondale, NY, has been a trusted provider of fences, gates, decks, and railings since 2007. Founded by Oscar Montalvan, the company began with a single truck and...

Bushwick Garage Doors & Gates

Bushwick Garage Doors & Gates

★★★★☆ 4.0 / 5 (2)
New York NY 10010
Fences & Gates, Garage Door Services

Alex Marshall leads Bushwick Garage Doors & Gates, a neighborhood garage door and gate specialist serving families across New York City since 2016. Rooted in the Bushwick community, Marshall and his t...

DG Fence

DG Fence

★★★★★ 4.7 / 5 (12)
Roosevelt NY 11575
Fences & Gates

DG Fence, Inc. is a licensed and insured fencing contractor serving Roosevelt, NY, and surrounding areas. With over 19 years of experience, we specialize in installing and repairing a wide variety of ...

KK&M Ironworks

KK&M Ironworks

★★★☆☆ 3.0 / 5 (2)
2156 Bergen St, Brooklyn NY 11233
Metal Fabricators, Fences & Gates

KK&M Ironworks, formerly known as Bacco Ironworks, is a Brooklyn-based full-service metal fabrication company serving the greater New York area. We specialize in custom iron and steel work, including ...

Fence R US

Fence R US

★★★☆☆ 3.4 / 5 (8)
2638 E 28th S, Brooklyn NY 11235
Fences & Gates, Decks & Railing, Landscape Architects or Designers

Fence R US has been serving Brooklyn, NY, and the greater New York City area for over 28 years. What began as a custom iron shop has grown into a full-service fencing and outdoor construction company....

Royal Iron Works

Royal Iron Works

★★☆☆☆ 2.0 / 5 (4)
1566 McDonald Ave, Brooklyn NY 11230
Fireplace Services, Fences & Gates, Decks & Railing

Royal Iron Works is a custom ironwork provider based in Brooklyn, NY, with over 15 years of experience in designing and fabricating interior and exterior railings, gates, and decorative pieces. We spe...

Forrester Fence Company

Forrester Fence Company

480 Chester St, Brooklyn NY 11212
Fences & Gates

Forrester Fence Company, based in Brooklyn, NY, specializes in fence and gate installation, repair, and maintenance. We tackle common local issues like aging fence systems and post shifting from frost...

Rw Iron Works Contruction

Rw Iron Works Contruction

★★★★★ 5.0 / 5 (6)
598 E Gun Hill Rd, New York NY 10467
Metal Fabricators, Fences & Gates, Masonry/Concrete

Rw Iron Works Construction is a family-owned business founded in 1990 by a father and now run alongside his son, both committed to quality craftsmanship. Specializing in metal fabrication, we also ins...



Estimated Fencing Costs in Mount Vernon, NY

Emergency Fence/Gate RepairStorm / Security Response
$329 - $444
Wood Privacy Fence (Per LF)Estimated Range
$29 - $44
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $64
Chain Link Installation (Per LF)Estimated Range
$19 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$49 - $69
Standard Driveway Gate InstallEstimated Range
$1,184 - $1,589

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Mount Vernon. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

FAQs

How deep should my fence posts go in Fleetwood?

Fence posts in Fleetwood require a 42-inch footing depth to reach below the frost line. Posts not set below this line are subject to frost heave, which will cause structural failure and misalignment within one or two winters. We design footings to IRC Section R403.1.4 standards to counter this uplift force.

How soon can you start a consultation in Fleetwood?

We typically schedule a site consultation within 48 hours. Our standard route from the St. Paul's Church National Historic Site area uses the Cross County Parkway, resulting in a 25-35 minute response window to most Fleetwood addresses. The consultation includes a zoning review and a wind load assessment for your specific lot.

Is my fence designed to handle high winds?

All fences are engineered for the local V-ult wind speed of 115 MPH. This rating dictates the maximum post spacing, concrete footing mass, and bracket strength required. We calculate loads per ASCE 7-22 standards to ensure the structure can survive peak storm season gusts without panel failure or overturning.

What are the height and setback rules for a fence in my yard?

Mount Vernon zoning limits fence heights to 4 feet in front yards and 6 feet in rear yards. A zero-foot setback is permitted, meaning you can build directly on your property line. For corner lots, you must maintain a clear 'sight triangle' at intersections to prevent visibility obstructions for traffic, a critical rule near the Cross County Parkway.

Can I have an automated gate if I have a pool?

Yes, but the gate system must integrate with pool safety codes. Under NYS Uniform Code Part 1220, any gate providing pool access must be self-closing and self-latching. Modern smart-gate IoT systems can be configured with these fail-safe mechanical latches, meeting both security trends and state liability standards for New York homeowners.

What fencing material holds up best to Mount Vernon's soil and pests?

Material compatibility is key given the moderate soil corrosivity index and termite risk. Pressure-treated pine or cedar are standard, but all fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. For vinyl or aluminum, use only manufacturer-specified, corrosion-resistant hardware to avoid galvanic corrosion.

What is required before you dig the first post hole?

New York 811 must mark all public utility lines at least two business days before excavation. Hitting a buried line in Fleetwood is a major liability causing service outages and fines. We manage the 811 ticket and coordinate any required Mount Vernon Building Department permits to ensure the project starts with cleared legal and safety ground.

Am I legally required to notify my neighbor before building a fence in Mount Vernon?

Yes. Under N.Y. Town Law Section 300, you must provide written notice to adjoining property owners before altering a shared boundary or 'partition fence'. This is a formal 2026 requirement for Mount Vernon. Failure to provide notice can result in a legal dispute over the fence's placement and cost.



Scroll to Top
CALL US NOW