Top Fencing Companies in Washington Heights, NY, 10940 | Compare & Call
There are 119 fencing companies server in Washington Heights NY
DFence Group is a fully licensed, bonded, and insured fence, gate, deck, and railing company serving Deer Park and all of Nassau and Suffolk County. Founded by industry veterans, the company focuses o...
Craftsman Fence
Craftsman Fence, a family-owned and operated business since 1974, has been serving East Moriches and the wider Long Island area from Montauk to Manhattan. Founded by Rudolf Pinka and still under the s...
J K Fence Contractors, based in Peekskill, NY, has been serving residential, commercial, and industrial clients since 1981. We offer a full range of fencing solutions, including installation, repair, ...
Structural Welders
Structural Welders is a steel fabrication and erecting company based in Airmont, NY, serving residential, commercial, and industrial clients in Spring Valley and the surrounding region. We specialize ...
WA Iron Works, originally founded as Mohegan Metalworks in 2000, is a small metalworking shop based in Buchanan, New York. For over two decades, the company has specialized in the design and fabricati...
Anchor Fence of Rockland, serving Nanuet and the surrounding areas for over 30 years, specializes in fences, gates, decks, and railing for both residential and commercial properties. We offer custom m...
Dave's Fences, a family-owned business established in 1997, has been serving Ossining and the surrounding Westchester and Putnam counties with professional fence and gate services. We specialize in in...
Founded in 1992 by Burim Krasniqi, Quality Fence in Peekskill, NY, is a licensed and insured fencing company with over 30 years of experience serving residential and commercial clients across New York...
Ketcham Fencing has served Otisville, NY, and the surrounding counties of Orange, Sullivan, Ulster, Rockland, Pike, and Delaware for more than 51 years. As a family-owned and operated business, we hav...
Protection Fence, a family-owned business based in Chester, NY, has been serving the Hudson Valley for over 40 years. We specialize in custom-made white cedar wood fences, chain link, post and rail, J...
Estimated Fencing Costs in Washington Heights, NY
FAQs
How deep should fence posts be set in Washington Heights?
Posts require a 42-inch minimum footing depth to pass below the local frost line. The IRC mandates this to prevent frost heave, which is the primary cause of post failure in our climate. In Washington Heights, a 30-inch hole will lead to a leaning fence within two seasons.
What are the height and placement rules for a fence in my yard?
Zoning limits are 4 feet for front yards and 6 feet for rear yards, measured from grade. A 0-foot setback is permitted, meaning you can build directly on your property line. However, corner lots have critical 'sight triangle' requirements. If your property is near the I-95 on-ramps, you must maintain driver visibility, which can override standard height limits.
What is the first step before you dig fence post holes?
You must call New York 811 for a utility locate. This is non-negotiable. Hitting a gas or communications line in Washington Heights creates major liability, service disruptions, and fines. We manage the entire permit process with the NYC Department of Buildings, including the 811 ticket, as part of our standard site prep.
What fence material holds up best against local soil and pests?
The moderate soil corrosivity index and termite risk require compatible materials. Pressure-treated Southern Yellow Pine or cedar are standard for wood. Use hot-dip galvanized or stainless-steel fasteners to prevent unsightly rust streaks. Avoid untreated pine in direct ground contact, as it will degrade.
How soon can you start a consultation for a new fence?
Our standard dispatch for a Washington Heights consultation is 45-60 minutes from notification. Our team routes from our base near Fort Tryon Park, using the I-95 Cross Bronx Expressway for primary access. We confirm the appointment with a 30-minute arrival window to respect your schedule.
Is a standard fence strong enough for the wind here?
No. The 120 MPH V-ult wind speed rating for the area dictates the engineering. A standard 8-foot post spacing will fail. We design to ASCE 7-22 standards, using 6-foot post centers with concrete footings and wind-rated metal brackets to survive peak storm season gusts channeled from the Hudson River and Fort Tryon Park.
Can I add a smart gate to my fence for pool safety?
Yes, and integration is now a standard practice. A self-closing, self-latching gate with IoT sensors that alert you to breaches is the modern solution. This integrated system meets the strict access control requirements of NYC Construction Code Appendix G for pool barriers, which is a key liability standard for New York homeowners.
Am I legally required to notify my neighbor before installing a fence?
Yes. For any fence on a shared property line, New York Real Property Actions and Proceedings Law § 871 (the 'Good Neighbor Law') requires written notice to the adjoining owner. As of 2026, this notice must be provided before any material is delivered to the site. Failure to comply can result in a court-ordered removal of the structure.