Top Fencing Companies in Lexington, OK, 73051 | Compare & Call

There are 163 fencing companies server in Lexington OK

Absolute Tree and Fencing

Absolute Tree and Fencing

★☆☆☆☆ 1.0 / 5 (2)
Shawnee OK 74804
Fences & Gates, Tree Services

Absolute Tree and Fencing, based in Shawnee, OK, is a locally owned company with over five years of experience in fence and gate installation, tree care, and related services. Founded by a professiona...

Two Brothers Handyman

Two Brothers Handyman

Shawnee OK 74801
Handyman, Fences & Gates, Decks & Railing

Two Brothers Handyman Services, based in Harrah, OK, is a construction contractor serving Shawnee and the surrounding areas. We specialize in a wide range of home improvement services, including fence...

Tgw Septic

Tgw Septic

3931 Harrison Dr, Harrah OK 73045
Septic Services, Fences & Gates, Gutter Services

Tgw Septic, based in Harrah, OK, provides essential septic services along with fencing and gutter solutions to local homeowners. Many Harrah properties face fencing issues like weather damage from Okl...

« Previous PagePage 17 of 17Next »


Estimated Fencing Costs in Lexington, OK

Emergency Fence/Gate RepairStorm / Security Response
$249 - $339
Wood Privacy Fence (Per LF)Estimated Range
$24 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$904 - $1,209

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Lexington. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Q&A

What are my legal duties before replacing a shared fence in Lexington, OK?

Oklahoma Statutes Title 60 Section 66, the 'Good Neighbor' law, requires written notice to adjoining landowners 30 days before altering a shared partition fence. In 2026, this includes email documentation. Failure to notify can result in shared cost forfeiture and small claims action.

How is my fence engineered for Oklahoma's high winds?

Lexington's 115 MPH V-ult wind speed rating per ASCE 7-22 dictates the design. We calculate wind pressure to determine post spacing, concrete footing mass, and bracket strength. A properly engineered fence in peak storm season must resist uplift and lateral loads without panel failure.

Why do posts for a fence in Downtown Lexington require deep concrete footings?

The IRC mandates footings extend below the frost line to prevent frost heave. Lexington's 12-inch frost depth means any post set shallower will lift during freeze-thaw cycles, causing rail warping and gate failure. We set all structural posts in 18-inch diameter concrete piers for stability.

Can I have a smart gate that also meets pool safety codes?

Yes. Modern IoT gate operators integrate with self-closing, self-latching hardware that meets IBC/IRC pool barrier standards. The system provides access logs and remote status checks, which strengthens liability defense in Oklahoma by demonstrating active hazard control.

How soon can a project start, and what is the consultation process?

We dispatch from our office near Lexington City Hall. A site consultation is scheduled within 48 hours, with a 15-20 minute travel time via US-77. The consultation includes a zoning verification, soil assessment, and a firm quote. Mobilization typically follows within 7-10 days post-permit approval.

What fencing material holds up best to Lexington's soil and insect conditions?

Given moderate soil corrosivity and moderate-to-heavy termite risk, hot-dip galvanized steel posts with powder-coated aluminum panels are optimal. We use stainless steel fasteners to prevent rust streaks. Pressure-treated pine requires ground-contact rated treatment and regular termite inspections.

What preparation is required before fence installation begins?

Call OKIE811 for a full utility locate; hitting a line in Downtown Lexington incurs major repair costs and liability. We then pull the municipal permit from Lexington City Hall, which requires the site plan and engineering specs. This process prevents work stoppages and fines.

What are Lexington's rules for fence height and placement on my property?

Zoning limits are 4 feet front, 8 feet rear, with a 0-foot setback permitted. Corner lots have critical 'sight triangle' easements for driver visibility. Any fence near the US-77 intersection must not obstruct the clear vision area, as defined by municipal code, or it will be red-tagged for removal.



Scroll to Top
CALL US NOW