Top Fencing Companies in Lexington, OK, 73051 | Compare & Call
There are 163 fencing companies server in Lexington OK
12 Corners Fence Company has been serving homeowners and businesses in Tecumseh, OK, and the surrounding Pottawatomie County area. Located just off Highway 9 near the Tecumseh Lake area, we specialize...
Vinyl Fence Warehouse is a family-owned business that started fabricating and installing vinyl fences in Oklahoma in 1990. After 22 years of growth, we became the largest vinyl fence fabricator in the...
Above All Fence Company LLC, founded in 2008, is a locally owned fence contractor serving Moore, OK, and the broader Oklahoma City metro. Built on a foundation of hard work and honesty, the company sp...
Premier Fence And Gates, owned by Warner and Kara Bass, has served Edmond, OK, for over 20 years. As a fourth-generation fence business, Warner brings deep expertise to every project. The company spec...
A Plus Door And Gate Services
A Plus Door And Gate Services, a veteran-owned and operated business based in Mustang, OK, brings over nine years of field expertise to residential and commercial clients. Founded on the principles of...
Fence Innovations, a licensed fence contractor in Norman, OK since 2014, specializes in custom cedar, chain link, and split rail fencing. Founded by Don M., the company also offers lawn maintenance, p...
Jimmies Remodeling Resources, based in Oklahoma City, OK, specializes in siding, fencing, gates, and patio coverings. The company understands that local fencing often suffers from high winds and sever...
Shaw’s Fencing is a locally owned and operated fencing company based in Oklahoma City, Oklahoma. We specialize in a full range of fencing services, including new fence and gate installations, as well ...
GK Fence & Construction, LLC is a family-owned business serving Oklahoma City, OK, with a focus on fences, gates, decks, and patio coverings. They offer a full range of services including fence and ga...
CSI Contracting Services
CSI Contracting Services, established in 1978, is an Oklahoma City-based insurance restoration company with over 35 years of hands-on experience. Founded by Jim Stewart, the firm specializes in restor...
Estimated Fencing Costs in Lexington, OK
Q&A
What are my legal duties before replacing a shared fence in Lexington, OK?
Oklahoma Statutes Title 60 Section 66, the 'Good Neighbor' law, requires written notice to adjoining landowners 30 days before altering a shared partition fence. In 2026, this includes email documentation. Failure to notify can result in shared cost forfeiture and small claims action.
How is my fence engineered for Oklahoma's high winds?
Lexington's 115 MPH V-ult wind speed rating per ASCE 7-22 dictates the design. We calculate wind pressure to determine post spacing, concrete footing mass, and bracket strength. A properly engineered fence in peak storm season must resist uplift and lateral loads without panel failure.
Why do posts for a fence in Downtown Lexington require deep concrete footings?
The IRC mandates footings extend below the frost line to prevent frost heave. Lexington's 12-inch frost depth means any post set shallower will lift during freeze-thaw cycles, causing rail warping and gate failure. We set all structural posts in 18-inch diameter concrete piers for stability.
Can I have a smart gate that also meets pool safety codes?
Yes. Modern IoT gate operators integrate with self-closing, self-latching hardware that meets IBC/IRC pool barrier standards. The system provides access logs and remote status checks, which strengthens liability defense in Oklahoma by demonstrating active hazard control.
How soon can a project start, and what is the consultation process?
We dispatch from our office near Lexington City Hall. A site consultation is scheduled within 48 hours, with a 15-20 minute travel time via US-77. The consultation includes a zoning verification, soil assessment, and a firm quote. Mobilization typically follows within 7-10 days post-permit approval.
What fencing material holds up best to Lexington's soil and insect conditions?
Given moderate soil corrosivity and moderate-to-heavy termite risk, hot-dip galvanized steel posts with powder-coated aluminum panels are optimal. We use stainless steel fasteners to prevent rust streaks. Pressure-treated pine requires ground-contact rated treatment and regular termite inspections.
What preparation is required before fence installation begins?
Call OKIE811 for a full utility locate; hitting a line in Downtown Lexington incurs major repair costs and liability. We then pull the municipal permit from Lexington City Hall, which requires the site plan and engineering specs. This process prevents work stoppages and fines.
What are Lexington's rules for fence height and placement on my property?
Zoning limits are 4 feet front, 8 feet rear, with a 0-foot setback permitted. Corner lots have critical 'sight triangle' easements for driver visibility. Any fence near the US-77 intersection must not obstruct the clear vision area, as defined by municipal code, or it will be red-tagged for removal.