Top Fencing Companies in Astoria, OR, 97103 | Compare & Call
There are 181 fencing companies server in Astoria OR
Mainstream Landscape
Since 2012, Mainstream Landscape has been a family-owned and operated company serving Sherwood, Oregon, and the surrounding areas. Our philosophy is simple: we do what we say and say what we do. We sp...
Cook's Fencing & Decking has been serving Estacada, Oregon, and the surrounding areas, providing expert fence and deck solutions. Specializing in fence installation, repair, weatherproofing, and gate ...
Imperial Construction and Exteriors
Imperial Construction and Exteriors serves Beaverton, OR, specializing in general contracting, fences, gates, decks, and railings. Many homes in areas like Cedar Hills and near Washington Square face ...
Northwest Fence & Deck
Northwest Fence & Deck, serving Tigard, OR, specializes in fences, gates, decks, and lighting fixtures. Many local homes experience fence issues like weather damage, rot, or aging—common in Tigard’s r...
All Seasons Home & Yard Care is a licensed landscaping and home services provider serving Tigard, Oregon and the surrounding area. Established in Oregon, we bring years of experience to every project,...
Double Cut Construction
Double Cut Construction, founded by Richard Sickles on September 1, 2020, serves residential homeowners in Portland, OR. As a full-service general contractor, we specialize in kitchen remodels, bathro...
Mike Golden Decking & Fence serves Tigard, OR, specializing in custom fences and gates that address the area's frequent issue of high winds and storm damage. Tigard's location in the Tualatin Valley a...
Rubi Construction is a licensed general contracting company based in Tigard, Oregon, with over 20 years of experience. We specialize in home additions, exterior painting, and new room additions, along...
503fences, located in Tualatin, OR, specializes in decks, railings, fences, gates, and patio coverings. A common local issue in Tualatin is seasonal moisture causing wood rot, which compromises deck s...
Baxter Construction and Painting
Baxter Construction and Painting is a licensed and bonded residential contractor based in Portland, OR, bringing seven years of hands-on experience in the Oregon construction industry to every job. Ow...
Estimated Fencing Costs in Astoria, OR
Common Questions
What are the rules for a pool fence with a smart gate in Oregon?
Oregon enforces ASTM F1908-16 and IBC Appendix G. The gate must self-close and self-latch. A smart gate with an integrated IoT latch meets this code if it fails securely. This modern setup is a growing trend for limiting liability in 2026.
Why do footings in Astoria need to be so deep?
The frost line depth is 12 inches in Astoria. Unprotected posts in Uniontown will lift from frost heave. IRC Section R403.1.4 requires footings to extend below this line to ensure structural stability and prevent fence failure.
What fence materials work best in Astoria's climate?
Moderate soil corrosivity requires hot-dip galvanized steel posts and fasteners to prevent rust streaks. Moderate termite risk means pressure-treated or naturally resistant wood is mandatory. Material compatibility prevents premature failure.
How soon can a crew start a fence project in Uniontown?
Our standard dispatch from the Astoria-Megler Bridge area via US-30 allows for a site consultation in 15-20 minutes. After the Oregon 811 locate and permit approval, scheduling depends on the current labor rate average of $42/hr and material lead times.
How high can my Astoria fence be, and where can I put it?
Astoria zoning limits are 3.5 feet for front yards and 6 feet for rear. Setback regulation is zero feet, so you can build on the property line. For corner lots near US-30, you must maintain a clear 'sight triangle' for traffic visibility; a tall fence there is a code violation.
Do I need to tell my neighbor before installing a fence in Astoria?
Yes. Under Oregon's Good Neighbor Law (ORS 96.010 - 96.060), you must provide written notice to the adjoining owner for any shared boundary fence project. This is a strict 2026 legal requirement in Astoria to establish a 'partition fence' and shared maintenance duties.
What are the first steps before digging fence post holes?
First, call Oregon 811 for a utility locate. Hitting a buried line in Uniontown is a major liability with repair costs and fines. Second, submit plans to the Astoria permit office. We manage this paperwork to ensure the project meets all local codes.
Is a standard fence strong enough for Astoria's wind?
No. The V-ult wind speed rating for the area is 125 MPH. A fence not engineered to ASCE 7-22 standards will fail. Design must account for this load with specific post spacing, concrete footings, and heavy-duty wind brackets to survive peak storm season gusts off the Columbia.
