Top Fencing Companies in Ontario, OR, 97914 | Compare & Call
There are 97 fencing companies server in Ontario OR
Combat Construction, Inc. is a veteran-owned and operated general contracting business serving the Willamette Valley, including Corvallis. Founded by an Oregon native and combat veteran of OEF and OIF...
Pro Fencing provides expert fence and gate installation, repair, refinishing, and painting services to homeowners in Brooks, OR, and the surrounding Salem area. Brooks’ damp Pacific Northwest climate ...
Eden's Image Landscaping
Eden's Image Landscaping, owned by Ben since 2007, brings over two decades of hands-on experience to Salem, Oregon. Ben’s passion for transforming outdoor spaces drives every project—from designing lu...
Creative Hand and More
Creative Hand and More is a licensed general contractor based in Salem, Oregon, serving residents and businesses in the Willamette Valley. We specialize in custom decks, fencing, roofs, and upscale ho...
MJ’s Fencing serves Salem, OR, offering junk removal and hauling alongside fence and gate services. Many local homeowners face the challenge of old, damaged fences that create debris piles or attract ...
Ben's Garage Doors & Gates provides expert fence and gate services to Portland homeowners and businesses. Located near the Hawthorne Bridge and serving neighborhoods from the Pearl District to Southea...
Tip Top Yard Maintenance, based in Salem, OR, was founded in January 2017 with a mission to transform outdoor spaces through affordable, high-quality service. Owner-operated, the business has grown ov...
HB Fence Decking & Construction, based in Aumsville, OR, specializes in residential and small commercial fencing and decking. As a local expert, we understand that many Aumsville homes face fencing is...
Cloverdale Fence Company, LLC is a family-owned fencing contractor based in Bend, Oregon, operating since 1991. Brothers Sam and Joe Sellers lead a team that specializes in ranch-style fencing for bot...
Jimco Fence serves Aumsville, OR, offering expert fence and gate services. The area's frequent rain and damp soil can cause wood rot, rust, and gate sagging. Jimco Fence addresses these issues with pr...
Estimated Fencing Costs in Ontario, OR
Common Questions
What fence materials work best with Ontario's soil and pest conditions?
Material compatibility is key given the moderate soil corrosivity index and moderate termite risk. Use pressure-treated wood rated for ground contact or vinyl. All fasteners must be hot-dip galvanized or stainless steel to prevent rust streaks. Untreated wood and standard steel posts will corrode and attract pests.
What are my legal obligations when replacing a shared fence in Ontario, OR?
Oregon Revised Statutes 96.010, the 'Good Neighbor' law, mandates specific action. You must provide written notice to all adjoining property owners at least 30 days before construction begins on a shared boundary line. This is a strict 2026 requirement in Ontario to establish cost-sharing and prevent disputes.
How deep do fence posts need to be in Ontario to prevent frost heave?
Post footings must extend to a minimum of 24 inches below grade, below the local frost line. The International Residential Code (IRC) requires this to prevent frost heave, which lifts and cracks posts. In Downtown Ontario soil, failure to meet this depth guarantees structural failure within 1-2 winters.
How soon can a project consultation be scheduled?
Consultations are typically scheduled within 48 hours. Our route from the Ontario State Park office via I-84 allows for a consistent 15-20 minute response time to most Downtown Ontario properties, pending current project load and the $45/hr prevailing labor rate for preliminary site assessment.
Is a standard fence design strong enough for Ontario's wind?
No. The 105 MPH V-ult wind speed rating dictates the engineering. Standard 8-foot post spacing often fails. Designs must use closer post spacing, reinforced concrete footings, and wind-rated structural brackets to resist the peak storm season gusts common from the I-84 corridor, as per ASCE 7-22 standards.
What are the fence height and placement rules for my property?
Ontario zoning limits fences to 4 feet in front yards and 6 feet in rear yards. A 0-foot setback allows construction directly on the property line. For corner lots, a clear 'sight triangle' is enforced for driver visibility, a critical safety rule for properties near I-84 where sight lines are paramount.
What is required before you dig the first post hole?
The Oregon 811 utility locate service is a mandatory, non-negotiable step. Hitting a gas, fiber, or power line in Downtown Ontario carries major financial and criminal liability. We manage this ticket and all associated City of Ontario permit office paperwork before any equipment arrives on-site.
Do smart gates meet Oregon's pool safety code?
Yes. Modern smart gate systems with integrated IoT latches can be configured to be self-closing and self-latching per IBC/IRC Appendix AG standards. This integration meets the liability standard for Oregon homeowners, combining automated access logs with mandated physical safety to prevent unauthorized pool entry.