Top Fencing Companies in Tigard, OR, 97140 | Compare & Call

Tigard zoning limits fences to 4 feet in front yards and 6 feet in rear yards. The city allows a 0-foot setback, meaning you can build directly on the property line. For corner lots, especially those near OR-99W, you must maintain a clear 'sight triangle' at intersections. This is a safety zone where fences over 3 feet tall are prohibited to ensure driver visibility.

Following a site consultation, we typically schedule projects within a 2-3 week window. For a consultation in Downtown Tigard, our standard dispatch route is from the Tigard Public Library via OR-99W, with an estimated travel time of 25-35 minutes depending on traffic. We confirm all appointments with a 30-minute arrival window.

Yes, but it must integrate with pool safety codes. IRC Appendix AG and Tigard Municipal Code 18.330 require pool barriers to have self-closing, self-latching gates. A modern smart-gate IoT system can meet this standard if its automated latch mechanism is certified for child safety. This integration is a growing trend in Oregon to satisfy both security and liability requirements.

Under Oregon Revised Statute 96.010, you have a 'good neighbor' duty. Before replacing any shared boundary or partition fence in Tigard, you must provide written notice to your adjoining neighbor. As of 2026, best practice includes documenting this notice to establish a clear timeline and avoid disputes over cost-sharing or property lines.

You must contact Oregon 811 at least two business days before any excavation. This free service locates underground utility lines. Hitting a gas, water, or fiber optic line in Downtown Tigard can result in major repair costs, service outages, and significant liability. A professional installer will manage this call and pull any required permits from the Tigard Permit Office as part of the project workflow.

Fence posts in Downtown Tigard must be set at least 18 inches deep, which is the local frost line. IRC Section R403.1.4 requires footings to extend below this depth to prevent frost heave, which can shift posts and damage the entire structure. Posts set shallower than 18 inches in our clay soils will likely fail within two winters.

Material compatibility is critical. With a moderate termite risk and low-to-moderate soil corrosivity, pressure-treated wood is a standard choice. For metal fences like aluminum or steel, use hot-dip galvanized or stainless-steel fasteners. Inferior fasteners will rust, causing unsightly streaks on the material and leading to premature joint failure.

Fences in Tigard must be engineered for a V-ult wind speed of 95 MPH per ASCE 7-22 standards. This rating dictates critical structural details: post spacing must be closer (often 6-8 feet on center), and posts require specific concrete footings and heavy-duty hurricane brackets. A fence not built to this standard will likely fail during our peak storm season from October to March.