Top Fencing Companies in Edwardsville, PA, 18704 | Compare & Call

Edwardsville zoning limits fences to 3 feet in front yards and 6 feet in rear/side yards. A zero-foot setback allows installation directly on the property line. Corner lots near US-11 require a 'sight triangle'—a clear zone for driver visibility—with no obstructions over 30 inches tall.

Frost protection. The Edwardsville frost line is 42 inches. Posts must be set below this depth with concrete footings to resist frost heave, which is the primary cause of leaning and failure in the Main Street Corridor. The IRC requires this depth for permanent structures.

Edwardsville has a V-ult wind speed of 115 MPH. This engineering rating dictates post spacing, concrete footing size, and bracket strength. Fences built to ASCE 7-22 standards use closer post spacing and reinforced corner posts to survive peak storm season gusts without panel failure.

Initial site consultations are typically scheduled within 48 hours. Our route from the Edwardsville Borough Municipal Building via US-11 allows for a 15-20 minute response time to most properties in the borough, pending prior scheduling and site accessibility confirmation.

Yes, when integrated correctly. The IRC Appendix AG requires a 48-inch minimum barrier with self-closing, self-latching gates. Modern IoT latches can meet this standard, providing remote access logs—a growing trend for liability protection under Pennsylvania law. The system must fail-safe to a locked state.

You must call Pennsylvania 811 at least three business days before excavation. Hitting a utility line in the Main Street Corridor is a major liability for repair costs and service disruption. A professional will also pull the required permit from the Edwardsville Borough Municipal Building office, managing all paperwork.

Pennsylvania Title 29, the state's fence law, governs boundary structures. In Edwardsville, you must formally notify all adjacent property owners in writing before altering a shared boundary fence. This 2026 legal requirement is a prerequisite for any work and helps prevent neighbor disputes.

Moderate soil corrosivity and termite risk require proactive selection. Pressure-treated pine must be rated for ground contact. Use hot-dipped galvanized or stainless steel fasteners to prevent rust streaks. Avoid direct wood-to-soil contact for above-ground structures to deter pests.