Top Fencing Companies in Tannersville, PA, 18372 | Compare & Call

There are 58 fencing companies server in Tannersville PA

K&B Construction

K&B Construction

Kingston PA 18704
Painters, Fences & Gates, Drywall Installation & Repair

K&B Construction, serving Kingston, PA, delivers personalized services in painting, fencing, gates, and drywall. We prioritize customer satisfaction by focusing on meticulous preparation and high-qual...

Hornick Construction

Hornick Construction

99 Poplar St, Kingston PA 18704
General Contractors, Fences & Gates, Painters

Hornick Construction, based in Kingston, PA, is a trusted general contractor specializing in remodeling, new construction, and fencing. Serving the Wyoming Valley area, they address a common local iss...

MJ Lawn and Fence

MJ Lawn and Fence

Pittston PA 18640
Fences & Gates

MJ Lawn and Fence is a trusted local fencing company serving Pittston, PA, and the surrounding areas. Located just minutes from the Pittston Memorial Library and the historic downtown district, they s...

Rutkoski Fencing

Rutkoski Fencing

★★★★★ 5.0 / 5 (1)
324 Dennison St, Swoyersville PA 18704
Fences & Gates

Rutkoski Fencing, based in Swoyersville, PA, has been a trusted provider of fencing solutions for residential, commercial, and industrial clients. The company specializes in a wide range of fencing ty...

St Hart Fencing

St Hart Fencing

Scranton PA 18505
Fences & Gates

St Hart Fencing is a veteran-owned, family-operated fencing company based in Scranton, PA, with over a decade of experience serving residential and commercial clients across Lackawanna and Luzerne Cou...

Rizzo Fence

Rizzo Fence

140 Scott Rd, Jefferson Township PA 18436
Fences & Gates

Rizzo Fence, established in 1987, is a licensed fencing contractor serving Jefferson Township, PA, and the surrounding areas. Specializing in both residential and commercial projects, they offer insta...

Frederick Fence

Frederick Fence

★☆☆☆☆ 1.0 / 5 (1)
141 Harris St, Dallas PA 18612
Fences & Gates

Frederick Fence, a family-owned fencing company based in Dallas, Pennsylvania, has been serving the local community since 2010. We specialize in the installation, repair, painting or staining, and wea...

Fence King

Fence King

Shavertown PA 18708
Fences & Gates

Fence King serves Shavertown, PA, helping local homeowners tackle common fencing challenges like storm damage from winter winds, rot from humidity, and privacy needs. Located near Route 309 and just m...

« Previous PagePage 6 of 6Next »


Estimated Fencing Costs in Tannersville, PA

Emergency Fence/Gate RepairStorm / Security Response
$359 - $489
Wood Privacy Fence (Per LF)Estimated Range
$34 - $49
Vinyl / PVC Fencing (Per LF)Estimated Range
$44 - $69
Chain Link Installation (Per LF)Estimated Range
$19 - $34
Aluminum / Ornamental (Per LF)Estimated Range
$54 - $79
Standard Driveway Gate InstallEstimated Range
$1,294 - $1,734

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Tannersville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

Can I add a smart gate to my pool fence and still meet Pennsylvania safety codes?

Yes, if integrated correctly. The PA Uniform Construction Code (IRC Appendix AG) requires self-closing, self-latching gates with latches 54 inches above grade or on the poolside. A smart gate actuator must not impede the mechanical self-closing function. IoT integration for remote status monitoring is a growing trend that enhances liability protection.

What are my legal obligations to a neighbor when replacing a shared Tannersville boundary fence?

Pennsylvania common law requires notice to an adjoining owner before replacing a partition fence on the property line. In 2026, best practice is to provide written notice 30 days prior, documenting the fence's condition. There is no mandatory cost-sharing statute, but formal notice mitigates disputes over property lines and replacement materials.

Is a standard 6-foot privacy fence strong enough for Tannersville's wind?

Not without engineering. The 110 MPH V-ult design wind speed dictates structural design. Standard 8-foot post spacing often fails. For a solid-panel fence, 6-foot spacing with concrete footings and wind-rated post brackets is typically required to resist peak storm season gusts, per ASCE 7-22 load calculations.

What are the height and placement rules for a fence on my property in Tannersville?

Tannersville zoning limits fences to 4 feet in front yards and 6 feet in rear/side yards. A 0-foot setback is permitted on the property line. For corner lots near I-80, maintain a clear 'sight triangle'—typically a 10-foot area from the property corner—free of obstructions over 3 feet high for driver visibility and compliance.

What is required before you dig the first post hole in my Tannersville Village yard?

Pennsylvania 811 utility locate service is mandatory and free. Hitting a buried line incurs major repair costs and liability. We manage the 811 ticket and coordinate with the local permit office. For Tannersville, this often includes a zoning compliance review to confirm height and placement before the borough issues a construction permit.

How soon can you start a project, and what is your consultation process?

We schedule site consultations within 48-72 hours of inquiry. Our standard route from The Crossings Premium Outlets via I-80 to Tannersville Village allows for a 15-25 minute response window. The consultation includes a site survey, wind exposure assessment from the highway corridor, and a review of your zoning certificate to establish a precise project timeline.

Will my fence posts survive winter in Tannersville Village without special footings?

No. The 42-inch frost line depth in Tannersville requires footings below that level. Posts set in shallow concrete will heave from frost action, causing racking and failure. The IRC mandates footings extend at least 12 inches below the undisturbed soil beneath the frost line for structural stability.

How do Tannersville's soil and pest conditions affect my choice of fencing material?

Moderate soil corrosivity and termite risk demand material compatibility. Pressure-treated wood must be rated for ground contact. Use hot-dip galvanized or stainless-steel fasteners to prevent rust streaks. Composite or vinyl materials offer high resistance but require proper UV stabilization. Aluminum is excellent for corrosion resistance but may not meet all wind load requirements.



Scroll to Top
CALL US NOW