Top Fencing Companies in Greenville, SC, 29601 | Compare & Call

There are 64 fencing companies server in Greenville SC

Pachecoscontractor

Pachecoscontractor

Anderson SC 29625
General Contractors, Fences & Gates, Masonry/Concrete

Pachecoscontractor serves homeowners in Anderson, SC, specializing in fence and gate installation, masonry and concrete repair, and general remodeling. Local residents often face fencing problems due ...

CTH Contracting Solutions

CTH Contracting Solutions

Clemson SC 29631
Fences & Gates, General Contractors, Gutter Services

CTH Contracting Solutions, owned by Avery Simmons, brings over four years of hands-on experience to Clemson, SC. Avery previously co-owned Redeemed Fencing LLC with his brother, and in late 2022, they...

Gold Standard Professionals

Gold Standard Professionals

Anderson SC 29621
Handyman, Fences & Gates, General Contractors

Gold Standard Professionals in Anderson, SC, specializes in handyman services, fencing, and general contracting. Many homes in the area face common fencing issues such as weather-damaged posts, leanin...

DJ Fencing

DJ Fencing

Starr SC 29684
Fences & Gates

DJ Fencing in Starr, SC, specializes in custom fences and gates for residential and agricultural properties. Serving the Starr community near Lake Hartwell and along Highway 81, the business addresses...

« Previous PagePage 7 of 7Next »


Estimated Fencing Costs in Greenville, SC

Emergency Fence/Gate RepairStorm / Security Response
$244 - $329
Wood Privacy Fence (Per LF)Estimated Range
$19 - $34
Vinyl / PVC Fencing (Per LF)Estimated Range
$29 - $49
Chain Link Installation (Per LF)Estimated Range
$14 - $24
Aluminum / Ornamental (Per LF)Estimated Range
$34 - $54
Standard Driveway Gate InstallEstimated Range
$874 - $1,174

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Greenville. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Common Questions

What are the legal steps for replacing a fence on my property line?

South Carolina Code Section 46-27-310, the 'Good Neighbor' law, requires written notification to adjoining landowners at least 30 days before work begins on a shared boundary. As of 2026, this notice must include the proposed materials, design, and a site plan. This formalizes the process and prevents disputes. A 0-foot setback allows building directly on the line, but it creates a 'partition fence' with shared ownership rights.

How is a fence designed for 115 MPH wind loads?

The 115 MPH V-ult wind speed is the ultimate design wind speed per ASCE 7-22 standards. This rating dictates post spacing, concrete footing mass, and bracket connection strength. A standard 6-foot panel will fail in a peak storm season gust if posts are spaced over 8 feet on center. The engineering calculates the overturning moment and requires specific post embedment and bracing to resist the wind pressure without collapsing.

What are the height and placement rules for a fence in Greenville?

Zoning limits are 4 feet for front yards and 8 feet for rear yards. The 0-foot setback allows installation directly on your property line. Critical exception: corner lots must maintain a 'sight triangle'—an area clear of visual obstructions—at intersections. For properties near I-385, this requirement is strictly enforced for driver safety. Always verify your lot lines and these triangles with a site survey before final design.

Why do fence posts in the West End need footings below 12 inches?

The 12-inch frost line depth is the IRC minimum for your zone. Posts set shallower than 12 inches will be subject to frost heave. The freeze-thaw cycle lifts posts out of alignment, causing permanent structural failure. In Greenville's climate, footings below the frost line provide a stable, immobile base that resists this uplift force.

What is the required process before digging fence post holes?

You must contact South Carolina 811 at least three full business days before excavation. They coordinate with all utilities to mark underground lines. Hitting an unmarked gas, water, or fiber line in the West End results in major repair costs, service outages, and significant liability. Concurrently, we manage all City of Greenville permit office paperwork, including any required Certificate of Appropriateness for historic district review.

How soon can a project consultation be scheduled?

Consultations are typically scheduled within 3-5 business days. Our routing from the Falls Park on the Reedy area via I-285 to the West End averages 25-35 minutes, accounting for midday traffic. We confirm the site address, review any preliminary survey documents, and block a 90-minute window for an on-site zoning and structural assessment.

How do Greenville's soil and insect risks affect material choice?

Material failure here is often a chemical, not structural, issue. The moderate soil corrosivity index accelerates rust on standard steel fasteners, causing unsightly streaks. The very heavy termite risk demands pressure-treated wood rated for ground contact or synthetic alternatives. Use hot-dip galvanized or stainless steel fasteners and hardware. Incompatible materials will degrade rapidly, requiring premature replacement.

Do smart gates and latches meet modern pool safety codes?

Yes, when properly integrated. The 2021 IRC Appendix AG (pool safety code) requires self-closing, self-latching gates with latches 54 inches above grade or on the pool side. A smart gate system with an IoT-controlled motorized latch can meet this standard, providing audit trails and remote status checks. This integration addresses liability by demonstrating active compliance with state-mandated barrier requirements.



Scroll to Top
CALL US NOW