Top Fencing Companies in Allen, SD, 57714 | Compare & Call
There are 35 fencing companies server in Allen SD
Fence Busters, based in Rapid City, SD, brings over three decades of fencing expertise to the Black Hills area. The owner began building fences on his grandfather's ranch in the late 1980s, then joine...
Freedom Fencing, a veteran-owned and family-operated company based in Buffalo Gap, SD, has been serving local communities since 2021. Founded by Kirk, who brings over a decade of professional fencing ...
Spark Landscaping is a family-owned landscaping design company serving homeowners in Rapid City, SD, and surrounding areas like Black Hawk and the West Boulevard neighborhood. We specialize in a full ...
Foothills Fence, a family-operated business based in Black Hawk, SD, has been serving Rapid City and the Northern Hills area since 1995. With over 50 years of combined experience, Kasey Bowerman and T...
605 Fencing is a local, family-owned business serving Rapid City and the surrounding Black Hills area. We specialize in fence and gate installation, repair, and automatic gate systems, as well as deck...
Skyline Enterprises
Skyline Enterprises, based in Rapid City, SD, specializes in fences & gates, decks & railing, and snow removal. We serve homeowners and businesses from the Black Hills to downtown Rapid City, includin...
American Fence has been serving Rapid City and the Black Hills region for over 30 years. From downtown homes near Main Street Square to rural properties along Highway 44, we install and repair residen...
Black Hills Handyman
Black Hills Handyman in Rapid City, SD, is your go-to general contractor for home repairs, remodeling, and fence work. The harsh Black Hills winters—with heavy snow and strong winds—often damage fence...
M & M Fencing in Rapid City, SD, provides expert fence and gate services to homeowners and businesses throughout the Black Hills region. Located just minutes from downtown and near landmarks like the ...
911 Fencing LLC, based in Box Elder, SD, is a family-owned and operated general contracting company with over 28 years of construction experience. We specialize in fences and gates, decks and railing,...
Estimated Fencing Costs in Allen, SD
Frequently Asked Questions
How soon can a crew start a project in Allen?
Following a site consultation, mobilization typically requires scheduling utility locates. Our route from the Allen Day School via US-18 allows for a 45-60 minute response to begin the assessment and planning process.
What is required before digging fence post holes?
You must contact South Dakota 811 for a utility locate. Striking a buried line in the Allen Residential Core creates major liability for repair costs and service disruption. A professional manages this and any associated permit office paperwork before mobilization.
Am I legally required to notify my neighbor before replacing a shared fence in Allen?
Yes. Under SD Codified Laws 43-23-1, the 'good neighbor law,' you must provide written notice to the adjoining landowner before constructing or replacing a partition fence on the property line. This is a specific 2026 legal requirement for Allen.
What are the height and placement rules for a fence on my property?
Allen zoning permits a 4-foot height in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation on the property line. Corner lots must maintain a clear 'sight triangle' for traffic safety, especially near high-speed corridors like US-18.
What fencing materials are suitable for Allen's soil conditions?
Allen has moderate soil corrosivity and low termite risk. Material compatibility is critical. Use hot-dip galvanized or stainless steel fasteners to prevent rust streaks. Avoid materials that trap moisture against untreated wood at the soil interface.
Will my fence posts survive the winters in the Allen Residential Core?
Posts that are not set below the 48-inch frost line will heave and fail. The IRC requires footings to extend below this depth to prevent frost action from destabilizing the structure. In this area, shallow-set posts are a guaranteed repair liability.
How is my fence designed to handle high winds?
Design is governed by the 115 MPH V-ult wind speed rating. This engineering standard dictates post spacing, concrete footer size, and bracket strength to resist overturning. A proper design survives peak storm season gusts without panel failure.
Do smart gates or latches meet modern safety codes?
Integrated IoT latches can be configured to meet the automatic closing and latching requirements of the International Swimming Pool and Spa Code (IBC/IRC). While smart gate adoption is low here, such systems address liability by ensuring a secured barrier.
