Top Fencing Companies in Bells, TN, 38006 | Compare & Call

There are 48 fencing companies server in Bells TN

Sunscapes

Sunscapes

★★★☆☆ 3.0 / 5 (2)
Friendsville TN 37737
Fences & Gates, Decks & Railing, Tree Services

Sunscapes serves Friendsville, TN, providing expert solutions for local fencing, decking, and tree care needs. Many homeowners in neighborhoods like Hunters Crossing and near the Little River face iss...

Exterior Arts Renovations

Exterior Arts Renovations

★★★☆☆ 3.0 / 5 (2)
Knoxville TN 37921
Masonry/Concrete, Decks & Railing, Fences & Gates

Exterior Arts Renovations, based in Knoxville, TN, specializes in masonry, concrete, decks, railing, fences, and gates for both residential and commercial properties. As the owner of a thriving concre...

Dalton’s Construction

Dalton’s Construction

★★★★★ 5.0 / 5 (1)
Whitesburg TN 37891
Masonry/Concrete, Fences & Gates, Plumbing

Dalton’s Construction has been serving Whitesburg, TN, and the surrounding areas for years, specializing in masonry and concrete work, fence and gate installation and repair, and plumbing services. Th...

Thankful Fencing and Decking

Thankful Fencing and Decking

1478 Catoosa Rd, Wartburg TN 37887
Handyman, Fences & Gates, Decks & Railing

At Thankful Fencing and Decking in Wartburg, TN, I bring over two decades of construction experience to every project. I started in the trades at 17 and earned a carpentry certificate before working a...

Neuberts Fencing & Property Maintenance

Neuberts Fencing & Property Maintenance

Knoxville TN 37918
Fences & Gates

For Knoxville homeowners, fences often face challenges from the region's clay-heavy soil and frequent freeze-thaw cycles, which can cause posts to shift or rot prematurely. Neuberts Fencing & Property...

Ironwood Complete

Ironwood Complete

579 Sportsman Club Rd, Crossville TN 38555
Fences & Gates, Metal Fabricators

Ironwood Complete is a fence and gate contractor based in Crossville, TN, serving all of East Tennessee. We specialize in the installation, repair, painting, staining, and weatherproofing of fences an...

Wittmer Property Management

Wittmer Property Management

★☆☆☆☆ 1.0 / 5 (1)
4815 E Emory Rd, Knoxville TN 37938
Landscaping, Pressure Washers, Fences & Gates

Wittmer Property Management has been serving Knoxville, TN, with reliable landscaping, pressure washing, and fence and gate services for years. Located near the University of Tennessee campus and just...

Beristain Fencing

Beristain Fencing

Maryville TN 37803
Fences & Gates

Beristain Fencing serves Maryville, TN, and the surrounding areas, offering expert fence and gate services including installation, repair, painting, staining, and weatherproofing. Many local homes fac...

Arch

Arch

★★★★★ 5.0 / 5 (1)
Corryton TN 37721
General Contractors, Fences & Gates, Painters

Arch is a general contracting company serving Corryton, TN, and the surrounding Knoxville area. We specialize in residential remodeling, fence and gate installation, and interior and exterior painting...

McCall Commercial Fencing

McCall Commercial Fencing

★★★☆☆ 3.3 / 5 (3)
6248 Kingsport Hwy, Gray TN 37615
Fences & Gates

McCall Commercial Fencing, based in Gray, TN, has been a trusted provider of fencing solutions since 1997. As a licensed general contractor with over 30 years of experience, the company specializes in...



Estimated Fencing Costs in Bells, TN

Emergency Fence/Gate RepairStorm / Security Response
$289 - $389
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,034 - $1,384

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Bells. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Question Answers

How does the 115 MPH V-ult wind rating affect my fence design?

The 115 MPH ultimate design wind speed (V-ult) dictates structural engineering. This rating, per ASCE 7-22 standards, requires reduced post spacing (often 6 feet on-center or less) and reinforced bracket connections. These specifications ensure the fence can survive peak storm season gusts without panel blow-out or catastrophic post failure.

Am I required to notify my neighbor before replacing our shared fence in Bells?

Yes. Tennessee Code Annotated Section 66-2-201, the 'Good Neighbor Fence Act,' requires written notice to adjoining landowners before replacing a partition fence on a shared property line. In Bells, this 2026 legal requirement provides a 30-day period for cost-sharing proposals and dispute resolution.

What are the fence height and placement rules for my property in Bells?

Bells zoning limits fences to 3 feet in front yards and 6 feet in rear yards, with a 0-foot setback allowing installation on the property line. For corner lots, especially near US-412, a clear 'sight triangle' must be maintained for driver visibility. This typically requires a maximum 3-foot height within 25 feet of the intersection.

How do modern pool gates meet updated safety and liability standards?

The IRC Appendix AG and International Swimming Pool and Spa Code mandate self-closing, self-latching gates that open outward. While smart-gate IoT integration remains a low trend in Bells, any automated latch system must fail-safe to a locked position. This integrated design meets modern liability standards by preventing unsupervised access, a critical factor for Tennessee homeowners.

How soon can a site consultation be scheduled?

We dispatch from a central location near Bells City Hall. The route via US-412 allows for a consistent 15 to 25-minute response time to most properties in Downtown Bells for an initial site consultation and estimate.

Why is a 12-inch footing depth critical for my fence post in Bells?

The 12-inch frost line depth determines structural stability. Posts set above it are subject to frost heave, where frozen soil lifts the footing upward. This leads to post rotation and panel failure. Per IRC R403.1.4, footings in Downtown Bells must extend a minimum of 12 inches below grade to prevent this cyclical movement.

What is the required process before digging fence post holes?

You must contact Tennessee 811 at least three full business days before excavation. They coordinate utility locates for gas, electric, and communications lines. Hitting a line in Downtown Bells, particularly near Bells City Hall, is a major liability involving repair costs and service disruption. We manage all associated permit office paperwork to ensure compliance.

What fencing materials perform best with Bells' moderate soil corrosivity and termite risk?

Material compatibility is essential. The moderate soil corrosivity index and moderate-to-heavy termite risk in Downtown Bells favor non-organic materials. Use pressure-treated wood rated for ground contact or galvanized steel posts. All fasteners must be hot-dipped galvanized or stainless steel to prevent rust streaks and premature failure.



Scroll to Top
CALL US NOW