Top Fencing Companies in Camden, TN, 38320 | Compare & Call

There are 61 fencing companies server in Camden TN

Cole Deck and Fence

Cole Deck and Fence

White Bluff TN 37187
Fences & Gates, Decks & Railing

Cole Deck and Fence is a family-owned home services company based in White Bluff, TN, serving the Nashville and middle Tennessee area for over 30 years. Licensed and insured, the company specializes i...

« Previous PagePage 7 of 7Next »


Estimated Fencing Costs in Camden, TN

Emergency Fence/Gate RepairStorm / Security Response
$289 - $389
Wood Privacy Fence (Per LF)Estimated Range
$24 - $39
Vinyl / PVC Fencing (Per LF)Estimated Range
$34 - $54
Chain Link Installation (Per LF)Estimated Range
$14 - $29
Aluminum / Ornamental (Per LF)Estimated Range
$44 - $64
Standard Driveway Gate InstallEstimated Range
$1,034 - $1,384

Methodology: Estimates are dynamically generated using localized construction labor multipliers derived from 2025 BLS OEWS (SOC 47-4031) data for Camden. Prices reflect standard commercial/residential material specs and labor options adjusted for 2026 economic projections.

Questions and Answers

How deep should fence posts be set in Camden?

Posts require a minimum 24-inch footing depth in Downtown Camden. The local frost line is 12 inches. Footings must extend at least 12 inches below that line to prevent frost heave, per IRC Section R403.1.4. Posts set in shallow concrete will uplift after the first hard freeze.

How soon can a crew start a fence project in Downtown Camden?

We dispatch a project manager for a site consultation within 24-48 hours of inquiry. The standard route from the Benton County Courthouse uses US-641, ensuring a 15-20 minute response time to most Downtown Camden properties for initial measurement and planning.

What fence materials hold up best to Camden's soil and pests?

Use pressure-treated pine rated for ground contact or steel posts with polymer sleeves. Camden has moderate soil corrosivity and a moderate-to-heavy termite risk. Aluminum or vinyl are low-maintenance options. Always specify hot-dip galvanized or stainless-steel fasteners to prevent rust streaks on the finish.

What preparation is required before digging fence post holes?

State law requires a Tennessee 811 utility locate request at least three full business days before digging. Hitting a gas or fiber line in Downtown Camden is a major liability with repair costs and fines. We manage the 811 ticket and any required city permit paperwork from the Benton County permit office.

Do automatic gate systems meet Tennessee pool code?

Yes. Integrated IoT gate latches with self-closing and self-latching mechanisms satisfy IRC Appendix AG and TN Building Code amendments. While smart gate adoption is low locally, these systems provide documented access control, which meets modern liability standards for homeowners with pools.

What are Camden's fence height and placement rules?

Camden zoning limits fences to 3 feet in front yards and 6 feet in side/rear yards. A 0-foot setback allows installation on the property line. For corner lots near US-641, clear 'sight triangles' are enforced. No structure or planting over 3 feet tall is permitted within 25 feet of the street intersection.

Is a standard fence strong enough for Camden's wind?

No. A design wind speed of 115 MPH V-ult governs. This engineering rating dictates post spacing, concrete footing size, and bracket strength. Typical 8-foot panel spacing often fails. We specify 6-foot centers with reinforced concrete footings and wind-rated hardware to survive peak storm season gusts.

Am I required to notify my neighbor before building a fence in Camden?

Yes. Tennessee Code Annotated Section 66-2-201, the 'Good Neighbor Fence Law,' mandates written notice to adjoining landowners before replacing a shared boundary fence. In Camden, this 2026 legal requirement includes a 30-day response period. Failure to notify can result in shared cost disputes.



Scroll to Top
CALL US NOW